- cypherpunks-legacy - lists.cpunks.org

Re: Signed, anonymous...(was Re: Getting Bush...)
by Karsten M. Self 25 Sep '01

25 Sep '01

on Tue, Sep 25, 2001 at 02:22:25PM -0700, Meyer Wolfsheim (wolf(a)priori.net) wrote: > On Tue, 25 Sep 2001, Karsten M. Self wrote: > > > > Future verifiability? > > > > The thought crossed my mind. > > This has been discussed multiple times. Tim just mentioned another > obvious reason: the key may be held by certain individual readers of > the list, but not the public in general. (Not likely to be the case in > this particular instance, because of Hushmail's problems, but > certainly a valid reason.) Signed messages can become a liability. Why > provide potentially dangerous information to those who do not need it? I suppose this has also been discussed, but if anyone has a favorite compelling argument I'd be interested in seeing it. > > Someone got cluesticks for me WRT cypherpunks list protocol, and/or > > the cypherpunks listmanager WRT RFC 2015? > > Cluesticks for you WRT mailing lists in general: don't use PGP/MIME. > (Hint: try to verify a PGP/MIME signed message in a web archive. Several Web archives include signatures. Checking, e.g.:, debian-user, I found I couldn't validate my own posts. However, archives in mbox format with full text of mail as received should work. I can think of several compelling arguments for supporting signed list messages, should the sender wish to sign. Peace. -- Karsten M. Self <kmself(a)ix.netcom.com> http://kmself.home.netcom.com/ What part of "Gestalt" don't you understand? Home of the brave http://gestalt-system.sourceforge.net/ Land of the free Free Dmitry! Boycott Adobe! Repeal the DMCA! http://www.freesklyarov.org Geek for Hire http://kmself.home.netcom.com/resume.html [demime 0.97c removed an attachment of type application/pgp-signature]

2 1

Attention Attorneys and Collection Agencies Special offer!
by AR.Management.Consultants＠ak47.algebra.com 25 Sep '01

25 Sep '01

"ATTENTION: ALL COLLECTION AGENCIES AND ATTORNEYS" Offer Expires September 30, 2001! Gain National Exposure Today! Collection Directory.com is pleased to announce our New National Directory! Listing in our National Directory allows you to have National Coverage by listing in every state including D.C. Now You Can Choose- List in one State or Every State: We are excited to offer the following specials: * List in one State : $89.00 (save $10.00- $99.00 as shown on web site) * List in Every State (Nationally): $450.00 (save $49.00- $499.00 as shown on web site) * List in one State for 2 years- $139.00 (SAVE $10.00 WITH THIS OFFER) PRICE ON THE WEB SITE IS $149.00. YOU MUST MENTION THIS OFFER TO RECEIVE THE DISCOUNT CollectionDirectory.com (click on the link below to visit our site) www.collectiondirectory.com has become the largest Collection Agency and Attorney Directory in the country. www.collectiondirectory.com operates exclusively as a Collection Agency and Attorney Directory focusing on attracting clients for its members. * Check Out Our Great New Site. * In Response to our Customer Feedback We have incorporated several new features: * Heightened Web Exposure and Web Presence on all Major Search Engines * Expanded Search Capabilities- Search by Agency, Attorney, location or any keywords * Toolbox- Full Service Legal and Collection Link Resource * Exclusive Banner Opportunities * Web Design and Web Maintenance * And Much Much More!!! * You will not find anything this comprehensive out there!!! * Don't Miss Out on this Exclusive Opportunity! List in CollectionDirectory.com and start asking your prospective clients where they heard about your company! Complete the easy On-line application at: http://www.collectiondirectory.com/join_directory.htm and email today * Submit Application Today with Credit Card Payment Option Become a Member and Be Listed in the Directory Within 24 hours. * Pay by Check Orders completed within 24 hours upon receipt of check. * You May also Fax the application to (949) 360-9241 or call (949) 831-8755 for Phone orders. * Listing in our directory is fast, easy and hassle free. Just fill out the online application and email or fax to 949 360 9241 including your payment option. * Membership is free upon the purchase of first Listing. * Referrals are 100% Free * Listings are by State, then City. Cost is Per Listing. You can be listed in one or in every state, any combination. * List Today and Start Tracking the Prospects! Call AR Management Consultants today (949) 831- 8755 27068 La Paz Road #243, Aliso Viejo, CA 92656-3041 www.collectiondirectory.com "This email ad is being sent in full compliance with U.S. Senate Bill 1618, Title #3, Section 301." (Which states "A statement that further transmissions of unsolicited commercial electronic mail to the recipient by the person who initiates transmission of the message may be stopped at no cost to the recipient by sending a reply to the originating electronic mail address with the word 'remove' in the subject line.")

1 0

NO DEJE QUE LE QUITEN SUS SUENOS!
by Trend Marketing 25 Sep '01

25 Sep '01

This offer is intended only for opt in clients of Trend Marketing & Associates who live in Latin America and Spain; if you believe that you have received this by error or do not wish to receive future offers please respond to this e-mail with the subject line "REMOVE" Si usted no desea recibir ofertas en el futuro favor de responder a este e-mail con el sujeto "NO MAS" ¡NO DEJE QUE LE QUITEN SUS SUEÑOS! ¡Usted ha sido seleccionado para estas vacaciones de 9 noches a solo $299.00 p/p! RESERVACION 70127907 CONTROL GNEM092601 Todo esto por tan solo $299.00 p/p basado en habitación doble. ¡Llame ahora mismo para detalles! (No incluye impuestos, cargos por servicios ni tramites de reservación.) Estas vacaciones de ensueño incluyen: 4 días y 3 noches de alojamiento frente al mar en la fabulosa Fort Lauderdale, Florida ó en la bella Daytona Beach, Florida. Si elige Fort Lauderdale recibirá el programa VIP en el Sawgrass Mills Mall con descuentos de hasta $1,500 en mercancia, comidas y servicios.Un paseo marítimo abordo del divertidísimo SunCruz con todas las comidas y entretenimientos incluidos. 4 días y 3 noches de alojamiento en el mágico Orlando, el hogar de Disney®, Epcot® y los estudios Universales® y MGM®. 2 entradas al parque acuático Water Mania. Tendrá un talonario de cupones con descuentos de más de $500 para comidas, entretenimientos y atracciones en el area de Orlando. Reserve ahora mismo y recibirá otros 4 días y 3 noches de alojamiento en exótico Cancún, Mexico. En este bono todas las comidas, bebidas y entretenimientos están incluidos. Desde la mayoría de los paises del mundo se marca el 001-305-899-8889 (Desde Colombia se marcaría el 0091-305-899-8889) (Desde Paraguay se marcaría el 0021-305-899-8889) Debido a la gran cantidad de llamadas que recibimos solo se permite una sola llamada por invitación. Lunes a Viernes 8:00 AM a 10:30 PM Sábados 9:00 AM a 5:00 PM (Domingos cerrado) TERMINOS Y CONDICIONES DREAMTIME TOURS es una agencia autorizada de reservaciones en los E.E.U.U. de todas las demás empresas arriba mencionadas y lleva a cabo el cumplimiento de este promoción de vacaciones. Nuestro éxito se debe a que nuestros clientes vuelven a viajar con nosotros una y otra vez. Esta oferta no se le ofrece al público en general. Queda bajo las leyes y regulaciones federales, estatales y locales. Esta oferta no está relacionada con ninguna oferta de tiempo compartido o "time share" ni con ninguna oferta de bienes raíces. El cumplimiento de esta oferta está garantizada por el departamento de reservaciones de DREAMTIME TOURS que está registrada como agencia de viajes en la Florida con el registro ST-22168. Todos los paquetes vacacionales para esta promoción exclusiva son para un mínimo de dos personas. Cada pareja puede ser acompañada por 2 niños: menores de 12 años viajan gratís, mayores de 12 años pagan $25.00 cada uno. A cada persona notificada se le ha asignado números de co! nt! rol y reservación. Ciertas restricciones pueden aplicar. Esto no es ninguna lotería, concurso o sorteo. ¡Se acepta una sola llamada para inscribirse! No se aceptan llamdas de terceros ni se le pueden dar detalles. Un hotel puede ser sustituido por otro de la misma clase si no hubiese disponibilidad. La oferta del coche de alquiler no incluye seguros, impuestos ní opciones adicionales. DREAMTIME TOURS INTERNATIONAL TRAVEL SERVICES 12000 Biscayne Blvd. Suite 202 Miami, Florida 33181 This offer is intended only for opt in clients of Trend Marketing & Associates who live in Latin America and Spain; if you believe that you have received this by error or do not wish to receive future offers please respond to this e-mail with the subject line "REMOVE" Si usted no desea recibir ofertas en el futuro favor de responder a este e-mail con el sujeto "NO MAS" © 2001 Derechos reservados de Trend Marketing & Associates, Inc

1 0

THREE MORE DAYS ONLY! Free links & seats Manuf Prod/Cntl Software $1,495!
by jbsptrsft88＠yahoo.com 25 Sep '01

25 Sep '01

(ESP925) THE CHANCE TO SAVE $2,000.00 ON JOB MASTER PRODUCTION AND CONTROL SOFTWARE ENDS IN THREE DAYS. Until 5:00 PM PST September 28, Job Master, normally $2,495.00, is not only on sale for $1,495.00, but if we receive your order by the end of our working day Friday, September 28, you'll also receive two user licenses and a link to either Peach Tree, QuickBooks or Excel at no charge, AN ADDITIONAL THOUSAND DOLLAR SAVINGS. THIS OFFER WILL NOT BE EXTENDED BEYOND THIS FRIDAY, SEPTEMBER 28. Right now, and for the next three days only, $1,495.00 buyS you Job Master, two seats, and a link to either Peach Tree, QuickBooks or Excel. Job Master retails for $2,495.00. Seats are $150.00 and links are $750.00 each. THIS IS A $3,500.00 VALUE FOR $1,495.00 IF YOU ORDER BY FRIDAY, SEPTEMBER 28. Job Master is designed specifically for small to medium sized manufacturers, and even at our regular price of $2,495.00 costs many thousands of dollars less than any other even remotely comparable software package. If you've been waiting to upgrade your production control and tracking software or to computerize your operation, now is the time. For the next week, $1,495.00 gets you everything-Job Master network version, two user licenses, and a link to your accounting program or to Excel. (To reply by E Mail to this message or be removed from our list, Please go to the bottom of this message for an E Mail link. Please do not respond to us by hitting the "Reply" button. Our phone number is also located at the bottom of this message.) Job Master, a complete, user friendly Windows based software package, can manage and control your operation from sales quote to shipment. Following is a list of features. If you have any questions, would like to discuss the package further, or if you would like to obtain our Web site address for a total walk through of the program, please call me directly at (661) 286-0041. By way of background, we are a software company, which for some years has specialized in the development of custom software, primarily for small to medium sized manufacturers. Job Master is a distillation of over a million and a half dollars of software we have developed to control and manage the production of our manufacturing clients. Job Master contains the following features: 1. QUOTATION MODULE. In this module, quotes are developed, modified, and produced for sending to your client. A history is kept of all quotes for future reference, or modification for other clients. All quotations and revisions are "auto numbered," including versions. The quotes section allows for the entry of parts/processes, and costing of each, including materials, labor, markup, and taxes. Inventory status can be accessed from this section for reference. 2. SALES ORDER. Once a quotation is accepted, the final quotation information can be transformed into a Sales Order for your client's signature on a "point and click" basis. The Sales Order can be modified and re issued if necessary. A history if kept of all Sales Orders for future reference, or modification for other clients. All sales orders and revisions are "auto numbered," including versions. Inventory status can be accessed from this section for reference. 3. CUSTOMER LETTERS can be created from the Quotation and Sales Order sections. 4. SHOP TRAVELER/WORK ORDER. Once a Sales Order is accepted, the sales order information can be transformed into a shop traveler/work order on a "point and click" basis. Each item on the Sales Order becomes a shop traveler/work order, with each step of production of the item then listed on the traveler/work order. Each such traveler/work order is tied back into the Sales Order. The shop traveler/work order allows for the entry of line items, and notes on each line item. The shop traveler/work order contains a "notes" section. The Shop traveler/work order allows for the storing or attachment of drawings to the traveler/work order. The shop traveler/work order also contains a "drop down," from which standard processes can be selected for inclusion on the shop traveler/work order. The shop traveler/work order numbers progress in order of production sequence, and re numbers them if new steps are added. The shop traveler/work order allows for change orders or revisions, and numbers changes in sequence of the original shop traveler/work order number; i.e., 100, 100-1, 100-2, etc. All shop traveler/work orders and related revisions are retained in memory for future reference. The shop traveler/work order is bar coded for tracking of production step by step, and production of ongoing client status reports. Bar coding includes the ability for an employee to "swipe" their own ID bar code for recording in the system as to who upgraded what step. The shop traveler/work order function also allows for manual update of production status. The shop traveler/work order allows for quality control sign off, and the final production of certifications, either from a "canned" list, or hand typed in on a case by case basis. 5. INVENTORY. The application includes an inventory section, which allows operations to check materials inventory in and out. The inventory section allows for the comparison of inventory received against a P.O., and produces an "overage/underage" report of inventory received as compared against the P.O. The inventory section allows for the setting of minimum (re-order now!) and maximum inventory amounts, and produces reports showing what inventory needs to be ordered, as well as inventory that is at or above the maximum set to have in house. The inventory section also tracks "partially shipped" orders, which are tied in to the shipping function. This section shows how much completed product under a particular order has been actually shipped to a client, and how much remains to be shipped. The balance is adjusted as shipments are made. 6. REQUEST FOR PURCHASE. The application allows operators to produce a Request For Purchase for accounting for any inventory items, which need to be ordered. Inventory items have a drop down of approved vendors for each item. 7. REQUEST FOR BID. The application allows operators to produce a Request For Bid for accounting to send to Vendors for any inventory items, which need to be ordered. Inventory items have a drop down of approved vendors for each item to which Requests For Bid can be sent. 8. INVOICE. The application produces an invoice/invoice detail for all completed items ready to be billed/shipped to clients. 9. PRODUCTION OUTPUT STATUS. The application produces a date range selectable report on how much product, and the value of the product, which was completed during a selected date range. The application also produces a report on how many orders, and the value of those orders, which remain to be completed during a selected date range. 10. The application produces SHIPPING DOCUMENTS as per selected shippers, and produces a PACKING SLIP. 11. The application has a "FIND" FUNCTION in selected sections, allowing for searches by customer name, work order number, etc. 12. The application has "AUTO FILL;" i.e., when an operator starts to type in a name, number, etc. all related information auto fills after the first few letters or numbers are typed in. Job Master is currently being sold in the marketplace for $2,495.00 per package. However, if we receive your order by September 28, your total price will be $1,495.00 INCLUDING a free link to either Peach Tree, QuickBooks or Excel (a $750.00 value) and two free seats (a $300.00 value). Again, if you have any questions at all, or would like to place your order, please call me on my direct line, (661) 286-0041. Thank you! Wayne McFarland Link It Software Corp. --------------------------------------------------------------------------- --------------- This message is sent in compliance of the new e-mail bill: SECTION 301. Per Section 301, Paragraph (a)(2)(C) of S. 1618. To REPLY or be REMOVED from this solicitated email list, please click on the E Mail address following this message and type "REMOVE" or "REPLY" in the subject line: jbsptrsft88(a)yahoo.com --------------------------------------------------------------------------- ----------------

1 0

No Regrets About Shamelessly Exploiting National Tragedy For My Own PerQ Gain.
by Frog2 25 Sep '01

25 Sep '01

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 C'punks, Phil Zimmermann did not ask me to post this. He would not like it freely disseminated, so feel free to post it wherever you wish. l a i n No Regrets About Shamelessly Exploiting National Tragedy For My Own Personal Gain. This Friday September 21st Washington Post carried an article by Ariana Cha that I feel misrepresents my views on the role I personally had in the September 11th terrorists attacks. She interviewed me on Monday September 17th, and we talked about how I felt about the possibility that the event might be a perfect opportunity for me to get some free press and get back some of the attention I lost since I was effectively kicked out of Network Associates and had to move to that cheesy webmail provider. The article states that as the inventor of PGP, I was "overwhelmed with feelings of guilt". I never implied that in the interview unless it seemed like it would increase my chances of getting in print, and I specifically went out of my way to try to pull other heart strings too just to assure that it would all see the light of day and put my name in lights again. I even made her repeat all this back so she would not get it wrong in the article. After all I am The Phil Zimmermann so I should have editorial control over these kinds of things, don't you think? This misrepresentation is serious. I expect the press to pull only those heart strings that will get me sympathy and allow me to grandstand publicly atop the bodies of the dead and dying in New York and elsewhere without attracting criticism of a substantial nature. The article implies that under the duress of terrorism I have changed my principles on the importance of my own vanity and ego and that I have pandered to the anti-crypto crowd in my endless quest to rediscover my former glory. You see, civil liberties and cryptography used to be a good platform for my self-promotion but with the acquisition of PGP and the closing of the source code I am now relegated to the unenviable stature of a "has-been" and a "one trick pony". You can probably understand why I jumped at the chance to indulge in a little self-promotion when those tall boxy things collapsed in New York this month. Because I am The Phil Zimmermann and my views are so important, Ms. Cha read to me most of the article by phone before she went about ignoring the express instructions of my PR agent not to print anything about me crying more than once or twice. It didn't seem very manly, they said. I miss Kelly Blough. She used to keep me out of trouble when I stuck my foot in my mouth in public. The article that appeared in the Post was significantly shorter than the original. I had so much important stuff to say that I cannot believe they took out my discussions on foreign affairs, international monetary policy, the national debt and Kevin Bacon's chances to capture a senate seat in an off year. I can only speculate that her editors must have decided their paper was not a forum for my own self-aggrandizement and taken some inappropriate liberties in removing all the work I put into composing my public image for that article. What the hell? In the interview six days after the attack, just after my PR rep called me and said that I might get in the paper if I played my cards right and this could be a huge boost for my career, we talked about the fact that I had cried over the heartbreaking tragedy, as everyone else did. In fact the tears were not because of guilt, but a highly concentrated formula of lemon juice that I applied to my eyelids before going out in public. When that stopped working I hit my thumb with a hammer for good measure. Let me tell you, nothing gets me teary eyed like a good thumb-whacking. I also told her about some hate mail I received that blamed me for developing a technology that could be used by terrorists. I didn't tell her that this email came from my PR rep. I told her I felt bad about the possibility of terrorists using PGP, but that I also felt that this was outweighed by the fact that I now had a personal stake in the tragedy with which to bootstrap my flagging ego and public image in a national publication. I also weaved some bullshit about human rights and crap, the kind of stuff I used to believe when I actually coded stuff rather than just babbling on about it like I mostly do now. Ah, I was so young and stupid. It appears that this nuance was not lost on the Washington Post since they made me look like the little sissy I always feared people saw me as. I imagine this was caused by my PR staff being stretched to their limits in an effort to keep me out of trouble and from saying the wrong thing at the wrong time to the wrong people. God, why do I always do that? In these emotional times, we in the crypto community find ourselves sidelined and ignored because our technology is so universal that no one thinks we are anything novel anymore. I do not want to give ammunition to these efforts by allowing the controversial sides of cryptography to be forgotten. I think the article correctly showed that I over-did things a bit with that crying in the shower quote, but that was my Publicist's idea. "Sex sells, Phil, baby", they said "use it". Did I re-examine my career path and my PR efforts in the wake of this tragedy? Of course I did. But the outcome of this re-examination was the same as it was during the years when people actually thought I was actually doing something, namely that someone better use cryptography in perpetrating a serious crime soon or the debate might fade and with it my glory days and meal ticket. Thank god for Osama! My career is back. I will have to do something about that PR firm and this article business, but in the meantime read my lips: I have no regrets about shamelessly invoking the name of the dead for my own personal gain and some smartassed reporter who refuses to be a platform for my personal promotion is just going to get run over by the new Zimmermann propaganda engine. I'm back baby. I'm back. I'm looking out for number one. Phil. Phil is number one. I'm going to buy my self some new clothes, a manicure, a facial, get back in shape, get a makeover, all of it. Phil is hitting the town. I feel like Churchill when the Nazi's started to finally make some damn noise. Resurrected baby. Res-urr-fucking-ected. The question of whether strong cryptography should be restricted by the government was debated all through the golden years for Phil Zimmermann, the 1990's. This debate had the participation of the White House, the NSA, the FBI, the courts, the Congress, the computer industry, civilian academia, and the press. Of course at the center of it all was me, Phil Zimmermann. This debate made me and PGP, both of which would have remained obscure and generally unheard of by anyone but geeks otherwise. This debate fully took into account the question of terrorists using strong crypto, and in fact, we tried to make that that one of the core issues of the debate. Unfortunately, no one used crypto in a major crime or act of terrorism so the debate fizzled out and with it went my invitations to parties, hearings, lectures and my talk circuit fees. Export controls were lifted and no domestic controls were imposed. I was pretty much out of a job. I should never have let PGP stay freeware. Can you imagine what I would be worth now? Look at Jim Bidzos! That was a terrible mistake that will not only hurt my wallet, but also increase my vulnerability to smartassed reporters like that Cha chick. PGP users should rest assured that I still will not acquiesce to any back doors in PGP. Of course since I have almost nothing to do with the development of the most widespread versions of PGP anymore no one really needs my permission to monkey with the code, do they? Still, I'm going to keep saying that because it makes me sound like a general figure of menace in the community. It is noteworthy that I had only received a single piece of hate mail on this subject, from my PR rep, and it was only really a sample of what would be nice for me to get so as to be able to comment on it for the article they had arranged an interview for. It is also noteworthy that this one piece of mail really generated a lot of publicity for me once it was printed in that Cha chick's article. Pretty soon I was dealing with so many press interviews that I did not have time to even send the check to my PR people to composed a carefully worded reply, which would of course have been published or leaked out quickly. Phil is busy again baby! Now I receive hundreds of supportive emails, flooding in at two or three per minute! Of course, some people saw through my thinly veiled PR effort, but I'm not counting those emails. This latest spin should put all that stuff to rest. Thanks to my PR group I have always enjoyed good relations with the press over the past decade, well not counting the fact that I haven't been IN the press much lately, but boy, some things are going to change with those people and let me assure all my fans that I'm cutting off the Post until they start to tow the line. -Philip "Press Whore" Zimmermann 25 September 2001 -----BEGIN PGP SIGNATURE----- Version: PGP 7.0.1 iQA/AwUBO7C+zf6o0E6piE+3EQKVPwCg1pw+jkTJJXk80nTkPaiK6vtQ7RIAn0jX baWfteAL7C7Vwrw1+miAvF5o =ZK8Q -----END PGP SIGNATURE-----

1 0

THREE MORE DAYS ONLY! Free links & seats Manuf Prod/Cntl Software $1,495!
by jbsptrsft88＠yahoo.com 25 Sep '01

25 Sep '01

(ESP925) THE CHANCE TO SAVE $2,000.00 ON JOB MASTER PRODUCTION AND CONTROL SOFTWARE ENDS IN THREE DAYS. Until 5:00 PM PST September 28, Job Master, normally $2,495.00, is not only on sale for $1,495.00, but if we receive your order by the end of our working day Friday, September 28, you'll also receive two user licenses and a link to either Peach Tree, QuickBooks or Excel at no charge, AN ADDITIONAL THOUSAND DOLLAR SAVINGS. THIS OFFER WILL NOT BE EXTENDED BEYOND THIS FRIDAY, SEPTEMBER 28. Right now, and for the next three days only, $1,495.00 buyS you Job Master, two seats, and a link to either Peach Tree, QuickBooks or Excel. Job Master retails for $2,495.00. Seats are $150.00 and links are $750.00 each. THIS IS A $3,500.00 VALUE FOR $1,495.00 IF YOU ORDER BY FRIDAY, SEPTEMBER 28. Job Master is designed specifically for small to medium sized manufacturers, and even at our regular price of $2,495.00 costs many thousands of dollars less than any other even remotely comparable software package. If you've been waiting to upgrade your production control and tracking software or to computerize your operation, now is the time. For the next week, $1,495.00 gets you everything-Job Master network version, two user licenses, and a link to your accounting program or to Excel. (To reply by E Mail to this message or be removed from our list, Please go to the bottom of this message for an E Mail link. Please do not respond to us by hitting the "Reply" button. Our phone number is also located at the bottom of this message.) Job Master, a complete, user friendly Windows based software package, can manage and control your operation from sales quote to shipment. Following is a list of features. If you have any questions, would like to discuss the package further, or if you would like to obtain our Web site address for a total walk through of the program, please call me directly at (661) 286-0041. By way of background, we are a software company, which for some years has specialized in the development of custom software, primarily for small to medium sized manufacturers. Job Master is a distillation of over a million and a half dollars of software we have developed to control and manage the production of our manufacturing clients. Job Master contains the following features: 1. QUOTATION MODULE. In this module, quotes are developed, modified, and produced for sending to your client. A history is kept of all quotes for future reference, or modification for other clients. All quotations and revisions are "auto numbered," including versions. The quotes section allows for the entry of parts/processes, and costing of each, including materials, labor, markup, and taxes. Inventory status can be accessed from this section for reference. 2. SALES ORDER. Once a quotation is accepted, the final quotation information can be transformed into a Sales Order for your client's signature on a "point and click" basis. The Sales Order can be modified and re issued if necessary. A history if kept of all Sales Orders for future reference, or modification for other clients. All sales orders and revisions are "auto numbered," including versions. Inventory status can be accessed from this section for reference. 3. CUSTOMER LETTERS can be created from the Quotation and Sales Order sections. 4. SHOP TRAVELER/WORK ORDER. Once a Sales Order is accepted, the sales order information can be transformed into a shop traveler/work order on a "point and click" basis. Each item on the Sales Order becomes a shop traveler/work order, with each step of production of the item then listed on the traveler/work order. Each such traveler/work order is tied back into the Sales Order. The shop traveler/work order allows for the entry of line items, and notes on each line item. The shop traveler/work order contains a "notes" section. The Shop traveler/work order allows for the storing or attachment of drawings to the traveler/work order. The shop traveler/work order also contains a "drop down," from which standard processes can be selected for inclusion on the shop traveler/work order. The shop traveler/work order numbers progress in order of production sequence, and re numbers them if new steps are added. The shop traveler/work order allows for change orders or revisions, and numbers changes in sequence of the original shop traveler/work order number; i.e., 100, 100-1, 100-2, etc. All shop traveler/work orders and related revisions are retained in memory for future reference. The shop traveler/work order is bar coded for tracking of production step by step, and production of ongoing client status reports. Bar coding includes the ability for an employee to "swipe" their own ID bar code for recording in the system as to who upgraded what step. The shop traveler/work order function also allows for manual update of production status. The shop traveler/work order allows for quality control sign off, and the final production of certifications, either from a "canned" list, or hand typed in on a case by case basis. 5. INVENTORY. The application includes an inventory section, which allows operations to check materials inventory in and out. The inventory section allows for the comparison of inventory received against a P.O., and produces an "overage/underage" report of inventory received as compared against the P.O. The inventory section allows for the setting of minimum (re-order now!) and maximum inventory amounts, and produces reports showing what inventory needs to be ordered, as well as inventory that is at or above the maximum set to have in house. The inventory section also tracks "partially shipped" orders, which are tied in to the shipping function. This section shows how much completed product under a particular order has been actually shipped to a client, and how much remains to be shipped. The balance is adjusted as shipments are made. 6. REQUEST FOR PURCHASE. The application allows operators to produce a Request For Purchase for accounting for any inventory items, which need to be ordered. Inventory items have a drop down of approved vendors for each item. 7. REQUEST FOR BID. The application allows operators to produce a Request For Bid for accounting to send to Vendors for any inventory items, which need to be ordered. Inventory items have a drop down of approved vendors for each item to which Requests For Bid can be sent. 8. INVOICE. The application produces an invoice/invoice detail for all completed items ready to be billed/shipped to clients. 9. PRODUCTION OUTPUT STATUS. The application produces a date range selectable report on how much product, and the value of the product, which was completed during a selected date range. The application also produces a report on how many orders, and the value of those orders, which remain to be completed during a selected date range. 10. The application produces SHIPPING DOCUMENTS as per selected shippers, and produces a PACKING SLIP. 11. The application has a "FIND" FUNCTION in selected sections, allowing for searches by customer name, work order number, etc. 12. The application has "AUTO FILL;" i.e., when an operator starts to type in a name, number, etc. all related information auto fills after the first few letters or numbers are typed in. Job Master is currently being sold in the marketplace for $2,495.00 per package. However, if we receive your order by September 28, your total price will be $1,495.00 INCLUDING a free link to either Peach Tree, QuickBooks or Excel (a $750.00 value) and two free seats (a $300.00 value). Again, if you have any questions at all, or would like to place your order, please call me on my direct line, (661) 286-0041. Thank you! Wayne McFarland Link It Software Corp. --------------------------------------------------------------------------- --------------- This message is sent in compliance of the new e-mail bill: SECTION 301. Per Section 301, Paragraph (a)(2)(C) of S. 1618. To REPLY or be REMOVED from this solicitated email list, please click on the E Mail address following this message and type "REMOVE" or "REPLY" in the subject line: jbsptrsft88(a)yahoo.com --------------------------------------------------------------------------- ----------------

1 0

FREE Tide Kick on its way!
by tidekick＠freesamples.com 25 Sep '01

25 Sep '01

Richard Cranium, Good news - we've mailed you a FREE Tide Kick and a coupon for $.50 off Tide Deep Clean Liquid. Look for it in your mailbox soon. Remember - there's a Tide Community with coupons, free samples, sales and discounts on Tide products, tips and advice on stain-fighting and fabric care. By signing up for their monthly newsletter you get a chance to win a year's supply of Tide and Downy Enhancer! I know you like special offers and samples, so check it out at: http://www.tide.com/neighbor/?v=06007015 Sincerely, The FreeSamples.com and Tide teams Please do not respond to this message. If you need to contact Tide, please click on this link or copy and paste it into your browser: http://www.tide.com/cgi-bin/tellUs.cgi?v=06007026

1 0

THREE MORE DAYS ONLY! Free links & seats Manuf Prod/Cntl Software $1,495!
by jbsptrsft88＠yahoo.com 25 Sep '01

25 Sep '01

(ESP925) THE CHANCE TO SAVE $2,000.00 ON JOB MASTER PRODUCTION AND CONTROL SOFTWARE ENDS IN THREE DAYS. Until 5:00 PM PST September 28, Job Master, normally $2,495.00, is not only on sale for $1,495.00, but if we receive your order by the end of our working day Friday, September 28, you'll also receive two user licenses and a link to either Peach Tree, QuickBooks or Excel at no charge, AN ADDITIONAL THOUSAND DOLLAR SAVINGS. THIS OFFER WILL NOT BE EXTENDED BEYOND THIS FRIDAY, SEPTEMBER 28. Right now, and for the next three days only, $1,495.00 buyS you Job Master, two seats, and a link to either Peach Tree, QuickBooks or Excel. Job Master retails for $2,495.00. Seats are $150.00 and links are $750.00 each. THIS IS A $3,500.00 VALUE FOR $1,495.00 IF YOU ORDER BY FRIDAY, SEPTEMBER 28. Job Master is designed specifically for small to medium sized manufacturers, and even at our regular price of $2,495.00 costs many thousands of dollars less than any other even remotely comparable software package. If you've been waiting to upgrade your production control and tracking software or to computerize your operation, now is the time. For the next week, $1,495.00 gets you everything-Job Master network version, two user licenses, and a link to your accounting program or to Excel. (To reply by E Mail to this message or be removed from our list, Please go to the bottom of this message for an E Mail link. Please do not respond to us by hitting the "Reply" button. Our phone number is also located at the bottom of this message.) Job Master, a complete, user friendly Windows based software package, can manage and control your operation from sales quote to shipment. Following is a list of features. If you have any questions, would like to discuss the package further, or if you would like to obtain our Web site address for a total walk through of the program, please call me directly at (661) 286-0041. By way of background, we are a software company, which for some years has specialized in the development of custom software, primarily for small to medium sized manufacturers. Job Master is a distillation of over a million and a half dollars of software we have developed to control and manage the production of our manufacturing clients. Job Master contains the following features: 1. QUOTATION MODULE. In this module, quotes are developed, modified, and produced for sending to your client. A history is kept of all quotes for future reference, or modification for other clients. All quotations and revisions are "auto numbered," including versions. The quotes section allows for the entry of parts/processes, and costing of each, including materials, labor, markup, and taxes. Inventory status can be accessed from this section for reference. 2. SALES ORDER. Once a quotation is accepted, the final quotation information can be transformed into a Sales Order for your client's signature on a "point and click" basis. The Sales Order can be modified and re issued if necessary. A history if kept of all Sales Orders for future reference, or modification for other clients. All sales orders and revisions are "auto numbered," including versions. Inventory status can be accessed from this section for reference. 3. CUSTOMER LETTERS can be created from the Quotation and Sales Order sections. 4. SHOP TRAVELER/WORK ORDER. Once a Sales Order is accepted, the sales order information can be transformed into a shop traveler/work order on a "point and click" basis. Each item on the Sales Order becomes a shop traveler/work order, with each step of production of the item then listed on the traveler/work order. Each such traveler/work order is tied back into the Sales Order. The shop traveler/work order allows for the entry of line items, and notes on each line item. The shop traveler/work order contains a "notes" section. The Shop traveler/work order allows for the storing or attachment of drawings to the traveler/work order. The shop traveler/work order also contains a "drop down," from which standard processes can be selected for inclusion on the shop traveler/work order. The shop traveler/work order numbers progress in order of production sequence, and re numbers them if new steps are added. The shop traveler/work order allows for change orders or revisions, and numbers changes in sequence of the original shop traveler/work order number; i.e., 100, 100-1, 100-2, etc. All shop traveler/work orders and related revisions are retained in memory for future reference. The shop traveler/work order is bar coded for tracking of production step by step, and production of ongoing client status reports. Bar coding includes the ability for an employee to "swipe" their own ID bar code for recording in the system as to who upgraded what step. The shop traveler/work order function also allows for manual update of production status. The shop traveler/work order allows for quality control sign off, and the final production of certifications, either from a "canned" list, or hand typed in on a case by case basis. 5. INVENTORY. The application includes an inventory section, which allows operations to check materials inventory in and out. The inventory section allows for the comparison of inventory received against a P.O., and produces an "overage/underage" report of inventory received as compared against the P.O. The inventory section allows for the setting of minimum (re-order now!) and maximum inventory amounts, and produces reports showing what inventory needs to be ordered, as well as inventory that is at or above the maximum set to have in house. The inventory section also tracks "partially shipped" orders, which are tied in to the shipping function. This section shows how much completed product under a particular order has been actually shipped to a client, and how much remains to be shipped. The balance is adjusted as shipments are made. 6. REQUEST FOR PURCHASE. The application allows operators to produce a Request For Purchase for accounting for any inventory items, which need to be ordered. Inventory items have a drop down of approved vendors for each item. 7. REQUEST FOR BID. The application allows operators to produce a Request For Bid for accounting to send to Vendors for any inventory items, which need to be ordered. Inventory items have a drop down of approved vendors for each item to which Requests For Bid can be sent. 8. INVOICE. The application produces an invoice/invoice detail for all completed items ready to be billed/shipped to clients. 9. PRODUCTION OUTPUT STATUS. The application produces a date range selectable report on how much product, and the value of the product, which was completed during a selected date range. The application also produces a report on how many orders, and the value of those orders, which remain to be completed during a selected date range. 10. The application produces SHIPPING DOCUMENTS as per selected shippers, and produces a PACKING SLIP. 11. The application has a "FIND" FUNCTION in selected sections, allowing for searches by customer name, work order number, etc. 12. The application has "AUTO FILL;" i.e., when an operator starts to type in a name, number, etc. all related information auto fills after the first few letters or numbers are typed in. Job Master is currently being sold in the marketplace for $2,495.00 per package. However, if we receive your order by September 28, your total price will be $1,495.00 INCLUDING a free link to either Peach Tree, QuickBooks or Excel (a $750.00 value) and two free seats (a $300.00 value). Again, if you have any questions at all, or would like to place your order, please call me on my direct line, (661) 286-0041. Thank you! Wayne McFarland Link It Software Corp. --------------------------------------------------------------------------- --------------- This message is sent in compliance of the new e-mail bill: SECTION 301. Per Section 301, Paragraph (a)(2)(C) of S. 1618. To REPLY or be REMOVED from this solicitated email list, please click on the E Mail address following this message and type "REMOVE" or "REPLY" in the subject line: jbsptrsft88(a)yahoo.com --------------------------------------------------------------------------- ----------------

1 0

Signed, anonymous...(was Re: Getting Bush...)
by auto301094＠hushmail.com 25 Sep '01

25 Sep '01

-----BEGIN PGP SIGNED MESSAGE----- Karsten wrote: >Might I ask what the purpose of utilizing hushmail, signing a message, >and not having publicly available keys, is? Among other reasons, mainly because it serves to make me feel a little more accountable for what I say here. People tend to act badly when they don't have anything at stake; it's just a symbolic 'good faith' gesture in that direction as a reminder to keep myself honest. "What's the matter with you that you need a reminder?" you might ask. Well, anyone with 1) ego issues 2) a rotten temper and 3) a mean streak (sound familiar...?) has to realize that adding a remailer to the mix makes for a potentially toxic combination. There's too much to lose, and these issues are just too important: if I came here to talk "to" people rather than "at" them, anything that helps me keep a civil tongue in my head is a huge plus. If I can't bring myself to discuss something rationally, I try to skip it. Would that more people did the same... It's the easiest thing in the world to hurl ad hominems at idiots you disagree with--in real life, much less behind a remailer!--but to make an exchange worth the time, you have to grow up and work a little harder than that. Otherwise, why waste your breath? You'd much be better off sitting around grousing and talking back to the TV set. How am I going to persuade anyone if I'm content to adopt the manner of a doddering old irrelevant kook? Ugh. A little common courtesy goes a long way: not quite there, but I'm working on it. I've been posting from cotse, but switched to my hushmail account since they announced they're shutting the free service down. I feel rather silly using a nickname these days, and anyway it's 100% pointless to assert continuity-of-identity from one psuedoanonymous account to another. Hope that answers your question... -----BEGIN PGP SIGNATURE----- Version: Hush 2.0 wl8EARECAB8FAjuxBPcYHGF1dG8zMDEwOTRAaHVzaG1haWwuY29tAAoJEKadvsVlUK4P 1MUAniHerbZoGhbx4bakhg65qQSPCi7xAKC40RE1IeqHgt229Yrf9iZpz5MvVA== =D6Pq -----END PGP SIGNATURE-----

1 0

Re: Clueless CATO Institute Thinks Ban On Knives A Good Thing
by mmotyka＠lsil.com 25 Sep '01

25 Sep '01

The ban is neither good nor bad, it's stooopid. When was the last time anyone was killed by a nail clipper? Have you ever lost a close relative to a keychain victorinox? Mike

1 0