[gin-ops] [gin-auth] start Savannah run

JP Navarro navarro at mcs.anl.gov
Tue Dec 5 09:58:36 CST 2006 

Colin,

UC/ANL TeraGrid GT4 client software and our services use  
GLOBUS_TCP_PORT_RANGE
of "50000,51000".

What range does the firewall that your clients are sitting behind  
have open?
The GLOBUS_TCP_PORT_RANGE on your clients should be set to that open  
range.

JP

On Dec 5, 2006, at 1:01 AM, Colin Enticott wrote:

> Hi Terrence,
>
> Some success.  I can submit from uaf-1.t2.ucsd.edu to all sites  
> using both
> with a generated proxy and the proxy I was trying everywhere else.
>
> The machines I was trying from are:
> 130.194.70.23
> 131.170.184.61
> 198.202.88.52
>
> I know the first machine has no firewall as I have exempted the host.
>
> When we run the experiment, we will be running it from  
> 130.194.70.23.  I
> guess it comes down to an IP firewall issue, or our servers not  
> trusting the
> host cert.  I have added to my server all the CA here, am I missing  
> one?:
> http://goc.pragma-grid.net/gin/gin-resources.html
>
> Thanks,
> Colin
>
> ---
> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
> Room H7.26, Level 7, Building H, Monash University Caulfield 3145,  
> Australia
>
>
>> -----Original Message-----
>> From: Terrence Martin [mailto:tmartin at physics.ucsd.edu]
>> Sent: Tuesday, 5 December 2006 5:47 PM
>> To: Colin Enticott
>> Cc: 'Yoshio Tanaka'; D.Bannon at vpac.org; navarro at mcs.anl.gov; gin-
>> auth at ggf.org; gin-ops at ggf.org
>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>
>> Just to make sure I am not missing you in the log, what IP are you
>> coming from?
>>
>> Terrence
>>
>>
>>
>> Colin Enticott wrote:
>>> Thanks Yoshio,
>>>
>>> So it looks like authentication issues as I can connect to port  
>>> 2119 on
>> both
>>> hosts:
>>>
>>> cme at edda$ globusrun -a -r tg-grid1.uc.teragrid.org
>>>
>>> GRAM Authentication test failure: connecting to the job manager  
>>> failed.
>>> Possible reasons: job terminated, invalid job contact, network  
>>> problems,
>> ...
>>> cme at edda$ globusrun -a -r osg-gw-2.t2.ucsd.edu
>>>
>>> GRAM Authentication test failure: connecting to the job manager  
>>> failed.
>>> Possible reasons: job terminated, invalid job contact, network  
>>> problems,
>> ...
>>>
>>> Regards,
>>> Colin
>>>
>>> ---
>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>> Room H7.26, Level 7, Building H, Monash University Caulfield 3145,
>> Australia
>>>
>>>
>>>
>>>> -----Original Message-----
>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
>>>> Sent: Tuesday, 5 December 2006 12:21 PM
>>>> To: Colin.Enticott at csse.monash.edu.au
>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;  
>>>> navarro at mcs.anl.gov;
>> gin-
>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>
>>>>
>>>> Hi Colin,
>>>>
>>>> Please test the authentication by the following command:
>>>>
>>>> % globusrun -a -r osg-gw-2.t2.ucsd.edu
>>>>
>>>> % globusrun -a -r tg-grid1.uc.teragrid.org
>>>>
>>>> Thanks,
>>>>
>>>> --
>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
>>>> http://ninf.apgrid.org/
>>>> http://www.apgridpma.org/
>>>>
>>>>
>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>> Date: Tue, 05 Dec 2006 11:44:05 +1100
>>>> Message-ID: <017401c71806$77cf6760$1e46c282 at nail>
>>>>
>>>>
>>>>> Thanks David,
>>>>>
>>>>> But still the same problem.  As you can see, my certificate still
>> works
>>>>>
>>>> on
>>>>
>>>>> the vpac host and there is definitely no firewall in the way:
>>>>>
>>>>> cme at edda$ grid-proxy-init -cert usercert.pem.APACGrid -key
>>>>> userkey.pem.APACGrid
>>>>> Your identity: /C=AU/O=APACGrid/OU=Monash University/CN=Colin  
>>>>> Enticott
>>>>> Enter GRID pass phrase for this identity:
>>>>> Creating proxy ................................... Done
>>>>> Your proxy is valid until: Tue Dec  5 23:28:47 2006
>>>>> cme at edda$ globus-job-run osg-gw-2.t2.ucsd.edu/jobmanager-fork
>> /bin/uname
>>>>>
>>>> -a
>>>>
>>>>> GRAM Job submission failed because the connection to the server  
>>>>> failed
>>>>> (check host and port) (error code 12)
>>>>> cme at edda$ globus-job-run tg-grid1.uc.teragrid.org/jobmanager-fork
>>>>>
>>>> /bin/uname
>>>>
>>>>> -a
>>>>> GRAM Job submission failed because the connection to the server  
>>>>> failed
>>>>> (check host and port) (error code 12)
>>>>> cme at edda$ globus-job-run ng1.vpac.org/jobmanager-fork /bin/ 
>>>>> uname -a
>>>>> Linux ng1.vpac.org 2.6.16.29-xen #4 SMP Sun Oct 15 13:20:46 BST  
>>>>> 2006
>>>>>
>>>> i686
>>>>
>>>>> i686 i386 GNU/Linux
>>>>> cme at edda$ telnet tg-grid1.uc.teragrid.org 2119
>>>>> Trying 192.5.198.225...
>>>>> Connected to tg-grid1.uc.teragrid.org.
>>>>> Escape character is '^]'.
>>>>>
>>>>>
>>>>> Connection closed by foreign host.
>>>>> cme at edda$ telnet osg-gw-2.t2.ucsd.edu 2119
>>>>> Trying 137.110.141.17...
>>>>> Connected to osg-gw-2.t2.ucsd.edu.
>>>>> Escape character is '^]'.
>>>>>
>>>>>
>>>>> Connection closed by foreign host.
>>>>>
>>>>>
>>>>> Any other thoughts from anyone?
>>>>>
>>>>> Thanks,
>>>>> Colin
>>>>>
>>>>> ---
>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield 3145,
>>>>>
>>>> Australia
>>>>
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: David Bannon [mailto:D.Bannon at vpac.org]
>>>>>> Sent: Monday, 4 December 2006 6:08 PM
>>>>>> To: JP Navarro
>>>>>> Cc: Colin Enticott; gin-auth at ggf.org; gin-ops at ggf.org; 'Terrence
>>>>>>
>>>> Martin'
>>>>
>>>>>> Subject: Re: [gin-auth] start Savannah run
>>>>>>
>>>>>>
>>>>>> Colin, you can run as a Gin user on any of the VPAC machines,  
>>>>>> my be
>>>>>> easier to debug....
>>>>>>
>>>>>> David
>>>>>>
>>>>>>
>>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote:
>>>>>>
>>>>>>> Colin,
>>>>>>>
>>>>>>> The error in the logs is below. Not sure what it means.   
>>>>>>> Could you
>>>>>>> try this
>>>>>>> test again from your SDSC TeraGrid account so we can rule out
>>>>>>> software and
>>>>>>> firewall issues?
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> JP
>>>>>>>
>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>   PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5 (/var/globus/ 
>>>>>>> prews-
>>>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log)
>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>   PID: 9608 -- Notice: 6: Got connection 198.202.88.52 at Thu  
>>>>>>> Nov 30
>>>>>>> 18:49:42 2006
>>>>>>>
>>>>>>> Failed reading length 0
>>>>>>> GSS authentication failure
>>>>>>>      globus_gss_assist token :3: read failure: Connection closed
>>>>>>> Failure: GSS failed Major:01090000 Minor:00000000 Token:00000003
>>>>>>>
>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>   PID: 9608 -- Failure: GSS failed Major:01090000 Minor:00000000
>>>>>>> Token:00000003
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Nov 30, 2006, at 7:05 PM, Colin Enticott wrote:
>>>>>>>
>>>>>>>
>>>>>>>> Thanks JP,
>>>>>>>>
>>>>>>>> But I am running into some problems.  I've tried both from our
>>>>>>>> server and
>>>>>>>> rocks-52 and this is what I get:
>>>>>>>> [cme at rocks-52 ~]$ globus-job-run tg-grid1.uc.teragrid.org/
>>>>>>>> jobmanager-fork
>>>>>>>> /bin/uname -a
>>>>>>>> GRAM Job submission failed because the connection to the server
>>>>>>>>
>>>> failed
>>>>
>>>>>>>> (check host and port) (error code 12)
>>>>>>>> [cme at rocks-52 ~]$ grid-proxy-info
>>>>>>>> subject  : /C=AU/O=APACGrid/OU=Monash University/CN=Colin
>>>>>>>> Enticott/CN=1087048434
>>>>>>>> issuer   : /C=AU/O=APACGrid/OU=Monash University/CN=Colin  
>>>>>>>> Enticott
>>>>>>>> identity : /C=AU/O=APACGrid/OU=Monash University/CN=Colin  
>>>>>>>> Enticott
>>>>>>>> type     : Proxy draft (pre-RFC) compliant impersonation proxy
>>>>>>>> strength : 512 bits
>>>>>>>> path     : /home/cme/globus_proxy.APACGrid
>>>>>>>> timeleft : 836:30:26  (34.8 days)
>>>>>>>> [cme at rocks-52 ~]$ ssh tg-grid1.uc.teragrid.org
>>>>>>>> Warning: Permanently added 'tg-grid1.uc.teragrid.org' (RSA)  
>>>>>>>> to the
>>>>>>>> list of
>>>>>>>> known hosts.
>>>>>>>> Permission denied (external-
>>>>>>>>
>>>> keyx,gssapi,publickey,gssapi,hostbased).
>>>>
>>>>>>>> [cme at rocks-52 ~]$
>>>>>>>>
>>>>>>>> That is the certificate that I registered with.  I also  
>>>>>>>> tried the
>>>>>>>> ssh key
>>>>>>>> pair I put up on the pragma wiki.
>>>>>>>>
>>>>>>>> Any thoughts?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Colin
>>>>>>>>
>>>>>>>> ---
>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield  
>>>>>>>> 3145,
>>>>>>>> Australia
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: JP Navarro [mailto:navarro at mcs.anl.gov]
>>>>>>>>> Sent: Friday, 1 December 2006 2:47 AM
>>>>>>>>> To: Colin Enticott
>>>>>>>>> Cc: zhengc at sdsc.edu; 'Terrence Martin'; gin-ops at ggf.org;  
>>>>>>>>> 'Oscar
>>>>>>>>> Koeroo';
>>>>>>>>> gin-auth at ggf.org
>>>>>>>>> Subject: Re: start Savannah run
>>>>>>>>>
>>>>>>>>> Colin,
>>>>>>>>>
>>>>>>>>> You should be set to go on the UC/ANL TeraGrid cluster.
>>>>>>>>>
>>>>>>>>> GT4 Pre-WS GRAM: tg-grid1.uc.teragrid.org:2119
>>>>>>>>> GT4 WS GRAM:     tg-grid1.uc.teragrid.org:8443 (FORK, PBS)
>>>>>>>>> GT4 GridFTP:     tg-gridftp.uc.teragrid.org:2811
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> JP
>>>>>>>>>
>>>>>>>>> On Nov 30, 2006, at 2:43 AM, Colin Enticott wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Thankyou everyone.
>>>>>>>>>>
>>>>>>>>>> I am now registered on the GIN VO (well, I appear here:
>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile).
>>>>>>>>>>
>>>>>>>>>> What is my next step?
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> Colin
>>>>>>>>>>
>>>>>>>>>> ---
>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield
>>>>>>>>>>
>>>> 3145,
>>>>
>>>>>>>>>> Australia
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc at sdsc.edu]
>>>>>>>>>>> Sent: Thursday, 30 November 2006 11:59 AM
>>>>>>>>>>> To: 'Terrence Martin'
>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org; 'Oscar Koeroo'; 'Colin
>>>>>>>>>>> Enticott'; gin-
>>>>>>>>>>> auth at ggf.org
>>>>>>>>>>> Subject: RE: FW: start Savannah run
>>>>>>>>>>>
>>>>>>>>>>> Thank you, Terrence!
>>>>>>>>>>> We'll wait to hear from Colin when Colin finishes
>>>>>>>>>>> registering to gin vo.
>>>>>>>>>>> Cindy
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>> From: Terrence Martin [mailto:tmartin at physics.ucsd.edu]
>>>>>>>>>>>> Sent: Wednesday, November 29, 2006 11:36 AM
>>>>>>>>>>>> To: Oscar Koeroo
>>>>>>>>>>>> Cc: zhengc at sdsc.edu; 'JP Navarro'; gin-ops at ggf.org; 'Colin
>>>>>>>>>>>> Enticott'; gin-auth at ggf.org
>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Oscar Koeroo wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Terrence and Cindy,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Getting new users up for registration on the GIN VO is  
>>>>>>>>>>>>> easy.
>>>>>>>>>>>>> To be
>>>>>>>>>>>>> able to access the secured website and for authentication
>>>>>>>>>>>>>
>>>> reasons
>>>>
>>>>>>>>>>>>> during the registration process new users must have their
>>>>>>>>>>>>>
>>>>>>>>>>>> certificate
>>>>>>>>>>>>
>>>>>>>>>>>>> loaded and ready in their webbrowser. The VOMS server is
>>>>>>>>>>>>>
>>>>>>>>>>>> loaded with
>>>>>>>>>>>>
>>>>>>>>>>>>> all IGTF accredited CAs including the Fermilab kCA.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Go to the website:
>>>>>>>>>>>>>
>>>>>>>>>>>> https://kuiken.nikhef.nl:8443/voms/gin.ggf.org/ and
>>>>>>>>>>>>
>>>>>>>>>>>>> apply for a "New user registration".
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> The usual VOMS configuration info is also available. I
>>>>>>>>>>>>>
>>>>>>>>>>>> don't know what
>>>>>>>>>>>>
>>>>>>>>>>>>> you'll need to populate a GUMS server. This VOMS server  
>>>>>>>>>>>>> is as
>>>>>>>>>>>>>
>>>> any
>>>>
>>>>>>>>>>>>> other so I guess you can use your regular setup.
>>>>>>>>>>>>> In addition to the secured interface I've also made  
>>>>>>>>>>>>> available
>>>>>>>>>>>>>
>>>> a
>>>>
>>>>>>>>>>>>> non-secured way of grabbing a grid-mapfile.
>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile
>>>>>>>>>>>>> There is also an RSS-feed pointing to the grid-mapfile and
>>>>>>>>>>>>>
>>>>>>>>>>>> the secured
>>>>>>>>>>>>
>>>>>>>>>>>>> interface at
>>>>>>>>>>>>>
>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/feed-gin.ggf.org.xml
>>>>>>>>>>>>
>>>>>>>>>>>>> Unfortunately I'm not aware of a clear guide. I do know a
>>>>>>>>>>>>> guide for
>>>>>>>>>>>>> creating the packed certificate files that go into your
>>>>>>>>>>>>>
>>>>>>>>>>>> browser if you
>>>>>>>>>>>>
>>>>>>>>>>>>> start from a two PEM formated files (certificate file +
>>>>>>>>>>>>> private key
>>>>>>>>>>>>> file) that's at http://certificate.nikhef.nl/info/browser
>>>>>>>>>>>>> Once a user has passed that stage, the registration for  
>>>>>>>>>>>>> the
>>>>>>>>>>>>>
>>>>>>>>>>>> VO is as
>>>>>>>>>>>>
>>>>>>>>>>>>> trivial as any web-forum account registration.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> I am assuming this user already has a grid cert since they
>>>>>>>>>>>> list a DN so
>>>>>>>>>>>> only VOMS registration is required. Once that is done  
>>>>>>>>>>>> either I
>>>>>>>>>>>> run my
>>>>>>>>>>>> update of GUMS manually or in 720/2 minutes on average the
>>>>>>>>>>>> user will be
>>>>>>>>>>>> automatically downloaded into my GUMS database. I  
>>>>>>>>>>>> actually do
>>>>>>>>>>>> not have
>>>>>>>>>>>> to do anything, but I can speed things up ever so  
>>>>>>>>>>>> slightly if
>>>>>>>>>>>>
>>>> I
>>>>
>>>>>>>>>>>> am in
>>>>>>>>>>>> the office and someone asks me to try refreshing gums.
>>>>>>>>>>>>
>>>>>>>>>>>> Terrence
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>    Oscar
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sounds right, Terrence. Let me ask Oscar who has  
>>>>>>>>>>>>>> helped me
>>>>>>>>>>>>>>
>>>>>>>>>>>> with GIN
>>>>>>>>>>>>
>>>>>>>>>>>>>> VO before.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi, Oscar,
>>>>>>>>>>>>>> Could you advise Colin what need to be done to be
>>>>>>>>>>>>>> added in GIN VO?
>>>>>>>>>>>>>> I'm also cc'ing to gin-auth list.
>>>>>>>>>>>>>> If there is a guide for potential GIN users, please
>>>>>>>>>>>>>> let me know the url and I can link it to our GINOPS
>>>>>>>>>>>>>> page.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>> From: Terrence Martin [mailto:tmartin at physics.ucsd.edu]
>>>>>>>>>>>>>>>
>>>> Sent:
>>>>
>>>>>>>>>>>>>>> Tuesday, November 28, 2006 3:24 PM
>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org; 'Colin Enticott'
>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The quickest and easiest way for me is to have him  
>>>>>>>>>>>>>>> added to
>>>>>>>>>>>>>>> a VO.
>>>>>>>>>>>>>>> How easy is it to add him to the GIN VO? One in there I
>>>>>>>>>>>>>>>
>>>>>>>>>>>> can hit my
>>>>>>>>>>>>
>>>>>>>>>>>>>>> gums reload and he will be able to access UCSD as a GIN
>>>>>>>>>>>>>>> user. Any
>>>>>>>>>>>>>>> other approach requires me hacking his DN into my local
>>>>>>>>>>>>>>>
>>>>>>>>>>>> VO which I
>>>>>>>>>>>>
>>>>>>>>>>>>>>> prefer to avoid and does not help him with any other  
>>>>>>>>>>>>>>> site.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks, Terrence, for the quick reply!
>>>>>>>>>>>>>>>> Colin has not been a GIN user.
>>>>>>>>>>>>>>>> What do you think it's the best way to get colin  
>>>>>>>>>>>>>>>> access?
>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>> From: Terrence Martin  
>>>>>>>>>>>>>>>>> [mailto:tmartin at physics.ucsd.edu]
>>>>>>>>>>>>>>>>>
>>>> Sent:
>>>>
>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 2:53 PM
>>>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org
>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> We only have a production cluster, but I should still
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> be
>>>>>>>>>>>>
>>>>>>>>>>>>>>> able to help.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I do not seem to have Colin in my GUMS database though
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> for
>>>>>>>>>>>>
>>>>>>>>>>>>>>> GIN or any
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> other VO. Should he be downloaded with GIN's users?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi, JP and Terrence,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Could you help Colin to get ready to run Savannah
>>>>>>>>>>>>>>>>>> application on your GIN testbed clusters?
>>>>>>>>>>>>>>>>>> You can find Colin's user info at
>>>>>>>>>>>>>>>>>> http://wiki.pragma-grid.net/index.php? 
>>>>>>>>>>>>>>>>>> title=ColinDetails
>>>>>>>>>>>>>>>>>> If you need more info or action from Colin, or have
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> any questions
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> for Colin or me, please let us know.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thank you very much!
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc at sdsc.edu] Sent:
>>>>>>>>>>>>>>>>>>
>>>> Tuesday,
>>>>
>>>>>>>>>>>>>>>>>> November 28, 2006 2:31 PM
>>>>>>>>>>>>>>>>>> To: 'gin-ops at ggf.org'
>>>>>>>>>>>>>>>>>> Subject: start Savannah run
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Dear all,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks for all the people involved to help make
>>>>>>>>>>>>>>>>>> TDDFT application run and GIN testbed monitoring
>>>>>>>>>>>>>>>>>> very fruitful experiments! We have learned a lot and
>>>>>>>>>>>>>>>>>>
>>>> have
>>>>
>>>>>>>>>>>>>>>>>> presented our learnings at OGF and SC06.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Let's continue our collaborative effort with our plan
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> - start our
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> next experiment with Savannah
>>>>>>>>>>>>>>>>>> fire simulation - a data-intensive application, to
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> explore data
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> related interoperation issues.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Colin Enticott at Monash University of Australia
>>>>>>>>>>>>>>>>>> is the lead driver. Colin has documented the
>>>>>>>>>>>>>>>>>> introduction and requirements of this application at
>>>>>>>>>>>>>>>>>> http://wiki.pragma-grid.net/index.php?title=Savannah
>>>>>>>>>>>>>>>>>> or go to
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> http://forge.gridforum.org/sf/wiki/do/viewPage/
>>>>>>>>>>>>>>>>> projects.gin/wi
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ki/GinOps
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> click "Savannah" under "Applications",
>>>>>>>>>>>>>>>>> where "first Savannah experiment" is refering to
>>>>>>>>>>>>>>>>> a previous experiment in PRAGMA testbed. The
>>>>>>>>>>>>>>>>> "second Savannah experiment" is the one for GIN  
>>>>>>>>>>>>>>>>> testbed.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> We like to run this application on all Grids in GIN
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> testbed, but
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> in 2 steps. First, we will run it on
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> PRAGMA/TeraGrid/OSG - since
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> these should be relatively easier to do. We like to  
>>>>>>>>>>>>>>>>> get
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> this done
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> before the year end.
>>>>>>>>>>>>>>>>> The next step, Colin will work with EGEE and Nordugrid
>>>>>>>>>>>>>>>>> to develop possible solutions, to enable  
>>>>>>>>>>>>>>>>> interoperation
>>>>>>>>>>>>>>>>> and to include all 5 Grids in the run.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks in advance for your continued help with this!
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>> --
>>>>>>>   gin-auth mailing list
>>>>>>>   gin-auth at ogf.org
>>>>>>>   http://www.ogf.org/mailman/listinfo/gin-auth
>>>>>>>
>>>>> --
>>>>>   gin-ops mailing list
>>>>>   gin-ops at ogf.org
>>>>>   http://www.ogf.org/mailman/listinfo/gin-ops
>>>>>
>>>
>>>
>>>
>

More information about the gin-ops mailing list