[gin-auth] The new VOMS Server for GIN is active from now
Cindy Zheng
zhengc at sdsc.edu
Fri Mar 10 17:57:39 CST 2006
Dear all,
Thank you for everyone's quick work and responses!
It's only been a week, I have learned a lot.
I started to write down some steps we've gone thru,
plus a little bits of things I think maybe good to
add for the future. Please take a look the attachment
and let me know any corrections, additions or comments.
We'll make this an on-going document as we continue
working on it.
Thank you, all, for your help and support!
Cindy
> -----Original Message-----
> From: owner-gin-auth at ggf.org [mailto:owner-gin-auth at ggf.org]
> On Behalf Of Cindy Zheng
> Sent: Thursday, March 09, 2006 9:23 PM
> To: 'Vincenzo Ciaschini'; 'Yusuke Tanimura'; 'Oscar Koeroo';
> gin-auth at ggf.org; 'Olivier van der Aa'; 'Philip
> Papadopoulos'; 'Catlett Charlie'; 'David Colling';
> m.aggarwal at imperial.ac.uk; yoshio.tanaka at aist.go.jp; 'Dane
> Skow'; 'JP Navarro'; 'Arzberger Peter'; fplin at nchc.org.tw;
> 'mason j. katz'
> Subject: RE: [gin-auth] The new VOMS Server for GIN is active from now
>
>
> Thank you, Vincenzo! These are very helpful
> requirement info. Perhaps can be included in
> the INSTALL file in the voms package?
>
> Now I have finished make and make install.
> What do I need to do with the server pem file,
> mkgridmap.conf etc.? Is there an url for such
> instructions?
>
> Dear all, I'm thinking that this may be a good
> opportunity to find out what info we need to
> provide to Other grid admins and users to make
> Grid interopration easier. Perhaps through our
> experiment, we can jot down a step by step
> interoperation guide for each grid?
>
> Welcome thoughts and suggestions from everyone!
>
> Thanks,
>
> Cindy
>
> > -----Original Message-----
> > From: Vincenzo Ciaschini [mailto:vincenzo.ciaschini at cnaf.infn.it]
> > Sent: Thursday, March 09, 2006 12:24 PM
> > To: mason j. katz
> > Cc: Cindy Zheng; 'Yusuke Tanimura'; 'Oscar Koeroo';
> > gin-auth at ggf.org; 'Olivier van der Aa'; 'Philip
> > Papadopoulos'; 'Catlett Charlie'; 'David Colling';
> > m.aggarwal at imperial.ac.uk; yoshio.tanaka at aist.go.jp; 'Dane
> > Skow'; 'JP Navarro'; 'Arzberger Peter'; fplin at nchc.org.tw
> > Subject: Re: [gin-auth] The new VOMS Server for GIN is
> active from now
> >
> >
> > doxygen is only a requirement if you want documentation.
> > Otherwise, you
> > can disable doc generation with the --enable-docs=no option
> > to configure.
> >
> > Anywya, the software requirements are the following:
> >
> > Globus Version 2.0 and up.
> > expat (both libraries and includes) from 1.95.5 and up. Not
> > tested with prevoius version, but it should work.
> >
> > doxygen Tested with 1.3.5, should work with earlier versions.
> > latex
> > sgml tools.
> >
> > Note that the need for doxygen, latex and the sgml tools
> > disappears if
> > --enable-docs=no is specified.
> >
> >
> > Finally, at least one of:
> > mysql include and libraries from 4.0.14 and up
> > Oracle include and libraries, tested with 10, should also
> > work with 9.
> >
> > Bye,
> > Vincenzo
> >
> > mason j. katz wrote:
> > > In addition to doxygen are there any other requirements
> > that systems
> > > may not typically have installed?
> > >
> > > Cindy - look in
> (/home/install/rocks-dist/lan/i386/RedHat/RPMS) on
> > > crayon and you will see all the OS RPMs, you can install
> > the doxygen on
> > > one the frontend and try the compilation again.
> > >
> > > -mjk
> > >
> > > On Mar 9, 2006, at 1:01 AM, Cindy Zheng wrote:
> > >
> > >> Hi, Vincenzo,
> > >>
> > >> I don't see any rpm bearing name with doxygen, but did find
> > >> some files named with doxygen. Since this is rocks cluster,
> > >> it came with a lot of software build in, I'll check with our
> > >> Rocks developers to be sure. What version of Doxygen does
> > >> voms require?
> > >>
> > >> Thanks,
> > >>
> > >> Cindy
> > >>
> > >>> -----Original Message-----
> > >>> From: Vincenzo Ciaschini
> [mailto:vincenzo.ciaschini at cnaf.infn.it]
> > >>> Sent: Wednesday, March 08, 2006 11:14 PM
> > >>> To: zhengc at sdsc.edu
> > >>> Cc: 'Mason Katz'; 'Yusuke Tanimura'; 'Oscar Koeroo';
> > >>> gin-auth at ggf.org; 'Olivier van der Aa'; 'Philip
> > >>> Papadopoulos'; 'Catlett Charlie'; 'David Colling';
> > >>> m.aggarwal at imperial.ac.uk; yoshio.tanaka at aist.go.jp; 'Dane
> > >>> Skow'; 'JP Navarro'; 'Arzberger Peter'; fplin at nchc.org.tw
> > >>> Subject: Re: [gin-auth] The new VOMS Server for GIN is
> > active from now
> > >>>
> > >>>
> > >>> Cindy Zheng wrote:
> > >>>
> > >>>> Thank you, Vincenzo, for your help!
> > >>>
> > >>>
> > >>> Hi Cindy,
> > >>>
> > >>>>
> > >>>> The work-around got me a lot further along.
> > >>>> But I encountered another error during make.
> > >>>> Since Yusuke was able to install with GT 2.4.3 without
> > >>>> much problem, I wonder if this is because that we are
> > >>>> running GT4?
> > >>>>
> > >>>> I'm attaching the log files (unix text files).
> > >>>
> > >>> What exactly the error was is uncertain since you only sent
> > >>> me stdout,
> > >>> but not stderr, so the actual error message is not present in
> > >>> the dump.
> > >>>
> > >>> However, judging from where compilation stopped, you had
> > >>> problems with
> > >>> doxygen during the generation of the documentation.
> > >>>
> > >>> Can you tell me what version of doxygen you have installed?
> > >>>
> > >>> Bye,
> > >>> Vincenzo
> > >>>
> > >>>>
> > >>>> Thanks again!
> > >>>>
> > >>>> Cindy
> > >>>>
> > >>>>
> > >>>>> -----Original Message-----
> > >>>>> From: Vincenzo Ciaschini
> > [mailto:vincenzo.ciaschini at cnaf.infn.it]
> > >>>>> Sent: Wednesday, March 08, 2006 4:30 AM
> > >>>>> To: Cindy Zheng
> > >>>>> Cc: 'Mason Katz'; 'Yusuke Tanimura'; 'Oscar Koeroo';
> > >>>>> gin-auth at ggf.org; 'Olivier van der Aa'; 'Philip
> > >>>>> Papadopoulos'; 'Catlett Charlie'; 'David Colling';
> > >>>>> m.aggarwal at imperial.ac.uk; yoshio.tanaka at aist.go.jp; 'Dane
> > >>>>> Skow'; 'JP Navarro'; 'Arzberger Peter'; fplin at nchc.org.tw
> > >>>>> Subject: Re: [gin-auth] The new VOMS Server for GIN is
> > >>>
> > >>> active from now
> > >>>
> > >>>>>
> > >>>>>
> > >>>>> Cindy Zheng wrote:
> > >>>>>
> > >>>>>
> > >>>>>> Thank you, Vincenzo, for your reply!
> > >>>>>> We are running Rocks which has GT4 already build-in.
> > >>>>>> I believe it's NMI distribution. To be sure, better
> > >>>>>> have our Rocks expert, Mason, to answer your questions.
> > >>>>>> Mason, could you answer Vincenzo's questions?
> > >>>>>>
> > >>>>>> Thanks,
> > >>>>>>
> > >>>>>> Cindy
> > >>>>>>
> > >>>>>
> > >>>>> Hi Cindy,
> > >>>>>
> > >>>>> I think I have a pretty good understanding of what the
> > >>>>> problem is,
> > >>>>> and of a solution to it, along with a (admittedly ugly)
> > >>>>> workaround while
> > >>>>> we commit the solution.
> > >>>>>
> > >>>>> Explanation:
> > >>>>> Normally, the $GLOBUS_LOCATION/include/ directory
> contains a
> > >>>>> subdirectory for each globus flavor. No packaging of globus
> > >>>>> we tested
> > >>>>> had the ldap_backend directory there. The ./configure
> > script takes
> > >>>>> advantage of this to discover what flavors are present.
> > >>>
> > >>> Clearly, the
> > >>>
> > >>>>> presence of ldap_backend messes things up.
> > >>>>>
> > >>>>> The solution:
> > >>>>> We will rewrite the configure.ac script to take into
> > >>>
> > >>> account the
> > >>>
> > >>>>> possible presence of the ldap_backend directory.
> > >>>>>
> > >>>>> The workaround:
> > >>>>> While waiting for the new release, you can do the
> > following to
> > >>>>> compile anyway:
> > >>>>>
> > >>>>> 1) mv $GLOBUS_LOCATION/include/ldap_backend $GLOBUS_LOCATION/
> > >>>>> 2) do the normal build cycle (configure/make/make install)
> > >>>>> 3) mv $GLOBUS_LOCATION/ldap_backend £GLOBUS_LOCATION/include/
> > >>>>>
> > >>>>> Bye,
> > >>>>> Vincenzo
> > >>>>>
> > >>>>>
> > >>>>>>> -----Original Message-----
> > >>>>>>> From: Vincenzo Ciaschini
> > [mailto:vincenzo.ciaschini at cnaf.infn.it]
> > >>>>>>> Sent: Wednesday, March 08, 2006 12:01 AM
> > >>>>>>> To: zhengc at sdsc.edu
> > >>>>>>> Cc: 'Yusuke Tanimura'; 'Oscar Koeroo'; gin-auth at ggf.org;
> > >>>>>>> 'Olivier van der Aa'; 'Philip Papadopoulos'; 'Catlett
> > >>>>>>> Charlie'; 'David Colling'; m.aggarwal at imperial.ac.uk;
> > >>>>>>> yoshio.tanaka at aist.go.jp; 'Dane Skow'; 'JP Navarro';
> > >>>>>>> 'Arzberger Peter'; fplin at nchc.org.tw; 'Mason Katz'
> > >>>>>>> Subject: Re: [gin-auth] The new VOMS Server for GIN is
> > >>>>>
> > >>>>>
> > >>>>> active from now
> > >>>>>
> > >>>>>>>
> > >>>>>>> Cindy Zheng wrote:
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>> Hi, Vincenzo,
> > >>>>>>>>
> > >>>>>>>
> > >>>>>>> Hi Cindy,
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>> Following you and Yusuke's discussion, I downloaded
> > >>>>>>>>
> > >>>>>>>
> > >>>>>>>
> http://glite.web.cern.ch/glite/packages/R1.5/N20060303/src/gli
> > >>>>>>
> > >>>>>>
> > >>>>>> te-security-vo
> > >>>>>>
> > >>>>>>
> > >>>>>>> ms-1.6.20_src.tar.gz
> > >>>>>>> ran configure and make, then encountered an error (below)
> > >>>>>>> with make. I'm also attaching the full log with command
> > >>>>>>> lines. The target cluster is a rocks 4.1 cluster, running
> > >>>>>>> GT4. Appreciate any help. Let me know if you need more info.
> > >>>>>>>
> > >>>>>>> Cindy
> > >>>>>>
> > >>>>>>
> > >>>>>> Here is the problem, taken from the output of configure:
> > >>>>>>
> > >>>>>>
> > >>>>>>> checking for GLOBUS flavors... found gcc32dbg gcc32dbgpthr
> > >>>>>>
> > >>>>>>
> > >>>>>> ldap_backend (gcc32dbg selected)
> > >>>>>>
> > >>>>>> As you can see, ldap_backend is discovered as a flavor even
> > >>>>>
> > >>>>>
> > >>>>> though it
> > >>>>>
> > >>>>>> obviously is not one. I'd have to say this is the first
> > >>>>>
> > >>>>>
> > >>>>> time something
> > >>>>>
> > >>>>>> like this happens. What version of globus have you
> > >>>>>
> > >>>>>
> > >>>>> installed ? And was
> > >>>>>
> > >>>>>> it taken from the globus site or from some other packaging?
> > >>>>>>
> > >>>>>> Bye,
> > >>>>>> Vincenzo
> > >>>>>>
> > >>>>>
> > >>>
> > >>
> > >
> >
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gin-egee.doc
Type: application/msword
Size: 34304 bytes
Desc: not available
Url : http://www.ogf.org/pipermail/gin-auth/attachments/20060310/9b5380be/attachment.doc
More information about the gin-auth
mailing list