[gin-auth] The new VOMS Server for GIN is active from now
Cindy Zheng
zhengc at sdsc.edu
Fri Mar 10 17:41:58 CST 2006
Hi, Vincenzo,
As I figured out the post installation tasks and be able
to run voms-proxy-init, I encountered another error.
I believe that Yusuke also encountered the same error
and made some code change in client.cc to get by. Since
you mensioned that you are getting ready to release 1.6.21,
I want to alert you to this. Whence you make the change,
please let me know and I'll test it again.
Thanks for all your help,
Cindy
> -----Original Message-----
> From: owner-gin-auth at ggf.org [mailto:owner-gin-auth at ggf.org]
> On Behalf Of Vincenzo Ciaschini
> Sent: Thursday, March 09, 2006 10:45 PM
> To: Cindy Zheng
> Cc: 'Yusuke Tanimura'; 'Oscar Koeroo'; gin-auth at ggf.org;
> 'Olivier van der Aa'; 'Philip Papadopoulos'; 'Catlett
> Charlie'; 'David Colling'; m.aggarwal at imperial.ac.uk;
> yoshio.tanaka at aist.go.jp; 'Dane Skow'; 'JP Navarro';
> 'Arzberger Peter'; fplin at nchc.org.tw; 'mason j. katz'
> Subject: Re: [gin-auth] The new VOMS Server for GIN is active from now
>
>
> Cindy Zheng wrote:
> > Thank you, Vincenzo! These are very helpful
> > requirement info. Perhaps can be included in
> > the INSTALL file in the voms package?
> >
> Yes.
>
> > Now I have finished make and make install.
> So, you can confirm that now building worked? If so, I will commit
> 1.6.21, which will remove the need for the workaround during
> compilation. I will announce here once it is done.
>
> > What do I need to do with the server pem file,
> > mkgridmap.conf etc.? Is there an url for such
> > instructions?
> >
> You need to do nothing special with the server certificate other than
> installing it (along with the key) in /etc/grid-security.
>
> Also, there is no need of having a gridmapfile in the VOMS server, so
> there is no need to do anything special. If you instead
> meant what to
> do on other sites to get a gridmapfile from VOMS, then the
> exact format
> depends on how you configure VOMS, so instructions are
> provided by voms
> itself, at the page of the admin interface. See the "configuration
> info" link.
>
> Bye,
> Vincenzo
>
> > Dear all, I'm thinking that this may be a good
> > opportunity to find out what info we need to
> > provide to Other grid admins and users to make
> > Grid interopration easier. Perhaps through our
> > experiment, we can jot down a step by step
> > interoperation guide for each grid?
> >
> > Welcome thoughts and suggestions from everyone!
> >
> > Thanks,
> >
> > Cindy
> >
> >
> >>-----Original Message-----
> >>From: Vincenzo Ciaschini [mailto:vincenzo.ciaschini at cnaf.infn.it]
> >>Sent: Thursday, March 09, 2006 12:24 PM
> >>To: mason j. katz
> >>Cc: Cindy Zheng; 'Yusuke Tanimura'; 'Oscar Koeroo';
> >>gin-auth at ggf.org; 'Olivier van der Aa'; 'Philip
> >>Papadopoulos'; 'Catlett Charlie'; 'David Colling';
> >>m.aggarwal at imperial.ac.uk; yoshio.tanaka at aist.go.jp; 'Dane
> >>Skow'; 'JP Navarro'; 'Arzberger Peter'; fplin at nchc.org.tw
> >>Subject: Re: [gin-auth] The new VOMS Server for GIN is
> active from now
> >>
> >>
> >>doxygen is only a requirement if you want documentation.
> >>Otherwise, you
> >>can disable doc generation with the --enable-docs=no option
> >>to configure.
> >>
> >>Anywya, the software requirements are the following:
> >>
> >>Globus Version 2.0 and up.
> >>expat (both libraries and includes) from 1.95.5 and up. Not
> >> tested with prevoius version, but it should work.
> >>
> >>doxygen Tested with 1.3.5, should work with earlier versions.
> >>latex
> >>sgml tools.
> >>
> >>Note that the need for doxygen, latex and the sgml tools
> >>disappears if
> >>--enable-docs=no is specified.
> >>
> >>
> >>Finally, at least one of:
> >>mysql include and libraries from 4.0.14 and up
> >>Oracle include and libraries, tested with 10, should also
> >> work with 9.
> >>
> >>Bye,
> >> Vincenzo
> >>
> >>mason j. katz wrote:
> >>
> >>>In addition to doxygen are there any other requirements
> >>
> >>that systems
> >>
> >>>may not typically have installed?
> >>>
> >>>Cindy - look in
> (/home/install/rocks-dist/lan/i386/RedHat/RPMS) on
> >>>crayon and you will see all the OS RPMs, you can install
> >>
> >>the doxygen on
> >>
> >>>one the frontend and try the compilation again.
> >>>
> >>> -mjk
> >>>
> >>>On Mar 9, 2006, at 1:01 AM, Cindy Zheng wrote:
> >>>
> >>>
> >>>>Hi, Vincenzo,
> >>>>
> >>>>I don't see any rpm bearing name with doxygen, but did find
> >>>>some files named with doxygen. Since this is rocks cluster,
> >>>>it came with a lot of software build in, I'll check with our
> >>>>Rocks developers to be sure. What version of Doxygen does
> >>>>voms require?
> >>>>
> >>>>Thanks,
> >>>>
> >>>>Cindy
> >>>>
> >>>>
> >>>>>-----Original Message-----
> >>>>>From: Vincenzo Ciaschini [mailto:vincenzo.ciaschini at cnaf.infn.it]
> >>>>>Sent: Wednesday, March 08, 2006 11:14 PM
> >>>>>To: zhengc at sdsc.edu
> >>>>>Cc: 'Mason Katz'; 'Yusuke Tanimura'; 'Oscar Koeroo';
> >>>>>gin-auth at ggf.org; 'Olivier van der Aa'; 'Philip
> >>>>>Papadopoulos'; 'Catlett Charlie'; 'David Colling';
> >>>>>m.aggarwal at imperial.ac.uk; yoshio.tanaka at aist.go.jp; 'Dane
> >>>>>Skow'; 'JP Navarro'; 'Arzberger Peter'; fplin at nchc.org.tw
> >>>>>Subject: Re: [gin-auth] The new VOMS Server for GIN is
> >>
> >>active from now
> >>
> >>>>>
> >>>>>Cindy Zheng wrote:
> >>>>>
> >>>>>
> >>>>>>Thank you, Vincenzo, for your help!
> >>>>>
> >>>>>
> >>>>>Hi Cindy,
> >>>>>
> >>>>>
> >>>>>>The work-around got me a lot further along.
> >>>>>>But I encountered another error during make.
> >>>>>>Since Yusuke was able to install with GT 2.4.3 without
> >>>>>>much problem, I wonder if this is because that we are
> >>>>>>running GT4?
> >>>>>>
> >>>>>>I'm attaching the log files (unix text files).
> >>>>>
> >>>>>What exactly the error was is uncertain since you only sent
> >>>>>me stdout,
> >>>>>but not stderr, so the actual error message is not present in
> >>>>>the dump.
> >>>>>
> >>>>>However, judging from where compilation stopped, you had
> >>>>>problems with
> >>>>>doxygen during the generation of the documentation.
> >>>>>
> >>>>>Can you tell me what version of doxygen you have installed?
> >>>>>
> >>>>>Bye,
> >>>>> Vincenzo
> >>>>>
> >>>>>
> >>>>>>Thanks again!
> >>>>>>
> >>>>>>Cindy
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>-----Original Message-----
> >>>>>>>From: Vincenzo Ciaschini
> >>
> >>[mailto:vincenzo.ciaschini at cnaf.infn.it]
> >>
> >>>>>>>Sent: Wednesday, March 08, 2006 4:30 AM
> >>>>>>>To: Cindy Zheng
> >>>>>>>Cc: 'Mason Katz'; 'Yusuke Tanimura'; 'Oscar Koeroo';
> >>>>>>>gin-auth at ggf.org; 'Olivier van der Aa'; 'Philip
> >>>>>>>Papadopoulos'; 'Catlett Charlie'; 'David Colling';
> >>>>>>>m.aggarwal at imperial.ac.uk; yoshio.tanaka at aist.go.jp; 'Dane
> >>>>>>>Skow'; 'JP Navarro'; 'Arzberger Peter'; fplin at nchc.org.tw
> >>>>>>>Subject: Re: [gin-auth] The new VOMS Server for GIN is
> >>>>>
> >>>>>active from now
> >>>>>
> >>>>>
> >>>>>>>
> >>>>>>>Cindy Zheng wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>Thank you, Vincenzo, for your reply!
> >>>>>>>>We are running Rocks which has GT4 already build-in.
> >>>>>>>>I believe it's NMI distribution. To be sure, better
> >>>>>>>>have our Rocks expert, Mason, to answer your questions.
> >>>>>>>>Mason, could you answer Vincenzo's questions?
> >>>>>>>>
> >>>>>>>>Thanks,
> >>>>>>>>
> >>>>>>>>Cindy
> >>>>>>>>
> >>>>>>>
> >>>>>>>Hi Cindy,
> >>>>>>>
> >>>>>>> I think I have a pretty good understanding of what the
> >>>>>>>problem is,
> >>>>>>>and of a solution to it, along with a (admittedly ugly)
> >>>>>>>workaround while
> >>>>>>>we commit the solution.
> >>>>>>>
> >>>>>>>Explanation:
> >>>>>>> Normally, the $GLOBUS_LOCATION/include/ directory contains a
> >>>>>>>subdirectory for each globus flavor. No packaging of globus
> >>>>>>>we tested
> >>>>>>>had the ldap_backend directory there. The ./configure
> >>
> >>script takes
> >>
> >>>>>>>advantage of this to discover what flavors are present.
> >>>>>
> >>>>>Clearly, the
> >>>>>
> >>>>>
> >>>>>>>presence of ldap_backend messes things up.
> >>>>>>>
> >>>>>>>The solution:
> >>>>>>> We will rewrite the configure.ac script to take into
> >>>>>
> >>>>>account the
> >>>>>
> >>>>>
> >>>>>>>possible presence of the ldap_backend directory.
> >>>>>>>
> >>>>>>>The workaround:
> >>>>>>> While waiting for the new release, you can do the
> >>
> >>following to
> >>
> >>>>>>>compile anyway:
> >>>>>>>
> >>>>>>>1) mv $GLOBUS_LOCATION/include/ldap_backend $GLOBUS_LOCATION/
> >>>>>>>2) do the normal build cycle (configure/make/make install)
> >>>>>>>3) mv $GLOBUS_LOCATION/ldap_backend £GLOBUS_LOCATION/include/
> >>>>>>>
> >>>>>>>Bye,
> >>>>>>> Vincenzo
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>>-----Original Message-----
> >>>>>>>>>From: Vincenzo Ciaschini
> >>
> >>[mailto:vincenzo.ciaschini at cnaf.infn.it]
> >>
> >>>>>>>>>Sent: Wednesday, March 08, 2006 12:01 AM
> >>>>>>>>>To: zhengc at sdsc.edu
> >>>>>>>>>Cc: 'Yusuke Tanimura'; 'Oscar Koeroo'; gin-auth at ggf.org;
> >>>>>>>>>'Olivier van der Aa'; 'Philip Papadopoulos'; 'Catlett
> >>>>>>>>>Charlie'; 'David Colling'; m.aggarwal at imperial.ac.uk;
> >>>>>>>>>yoshio.tanaka at aist.go.jp; 'Dane Skow'; 'JP Navarro';
> >>>>>>>>>'Arzberger Peter'; fplin at nchc.org.tw; 'Mason Katz'
> >>>>>>>>>Subject: Re: [gin-auth] The new VOMS Server for GIN is
> >>>>>>>
> >>>>>>>
> >>>>>>>active from now
> >>>>>>>
> >>>>>>>
> >>>>>>>>>Cindy Zheng wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>>Hi, Vincenzo,
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>Hi Cindy,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>>Following you and Yusuke's discussion, I downloaded
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>http://glite.web.cern.ch/glite/packages/R1.5/N2006030
> 3/src/gli
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>te-security-vo
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>ms-1.6.20_src.tar.gz
> >>>>>>>>>ran configure and make, then encountered an error (below)
> >>>>>>>>>with make. I'm also attaching the full log with command
> >>>>>>>>>lines. The target cluster is a rocks 4.1 cluster, running
> >>>>>>>>>GT4. Appreciate any help. Let me know if you need more info.
> >>>>>>>>>
> >>>>>>>>>Cindy
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>Here is the problem, taken from the output of configure:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>checking for GLOBUS flavors... found gcc32dbg gcc32dbgpthr
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>ldap_backend (gcc32dbg selected)
> >>>>>>>>
> >>>>>>>>As you can see, ldap_backend is discovered as a flavor even
> >>>>>>>
> >>>>>>>
> >>>>>>>though it
> >>>>>>>
> >>>>>>>
> >>>>>>>>obviously is not one. I'd have to say this is the first
> >>>>>>>
> >>>>>>>
> >>>>>>>time something
> >>>>>>>
> >>>>>>>
> >>>>>>>>like this happens. What version of globus have you
> >>>>>>>
> >>>>>>>
> >>>>>>>installed ? And was
> >>>>>>>
> >>>>>>>
> >>>>>>>>it taken from the globus site or from some other packaging?
> >>>>>>>>
> >>>>>>>>Bye,
> >>>>>>>> Vincenzo
> >>>>>>>>
> >>>>>>>
> >
>
More information about the gin-auth
mailing list