Centre for Hypersonics - HyShot Scramjet Test Programme
Steve Schear
schear at lvcm.com
Mon Feb 26 22:19:36 PST 2001
At 09:45 AM 2/23/01 -0500, Trei, Peter wrote:
>I'll speculate that Jim posted this as a demo that 'amateur' rocketry
>can reach orbit. If you read the article, you'll find it does nothing of
>the kind. This is suborbital - in fact, the rocket goes almost 350km
>straight up and down (they're testing scramjet configurations during
>re-entry).
A significant portion of a solid rocket motor's weight is the casing and
nozzle. The casing allows the gases from the burning propellent to
generate enough pressure that when they exit the nozzle their moving a very
high velocity. One of the brightest recent ideas in rocketry comes from
Technanogy (http://www.technanogy.net): if you reduce the size of the
propellent grains the velocity of the gasses at the burning surface can go
from sub-sonic to supersonic without the need for a nozzle (perhaps even a
casing). Goodbye nozzle and casing, hello single-stage to orbit. Thrust
vectoring, if desired, would be accomplished by other well-known means.
Technanogy has built a pilot plant to manufacture 40 nm aluminum
powder. The technology's efficacy was verified by a series of test at
Aerospace Corp. and they have secured a grant to retrofit a large number
Sidewinders. They claim that the change should dramatically increase range
with minimal weapon system changes. If successful they hope to apply their
approach to orbital vehicles.
steve
More information about the Testlist
mailing list