[ogsa-wg] Update OGSA roadmap v1.1 draft

[Toshiyuki Nakata]

Hi: Hiro:
Thank you very much for your quick response & action.
Best Regards
Toshi
-----
Toshiyuki Nakata 中田　登志之
Executive Chief Engineer, Central Research Lab. NEC
1753, Shimonumabe, Nakahara-Ku,
Kawasaki,Kanagawa 211-8666,Japan
Tel +81-44-431-7653 (NEC Internal 22-60035)
Fax +81-44-431-7609 (NEC Internal 22-60509)
 

> -----Original Message-----
> From: Hiro Kishimoto [mailto:hiro.kishimoto at jp.fujitsu.com] 
> Sent: Tuesday, August 14, 2007 5:16 PM
> To: Toshiyuki Nakata
> Cc: 'Christopher Jordan'; 'ogsa-wg'; jim_pruyne at hp.com; 
> Wolfgang.Ziegler at scai.fraunhofer.de; ph.wieder at fz-juelich.de
> Subject: Re: [ogsa-wg] Update OGSA roadmap v1.1 draft
> 
> Thanks Toshi for your valuable comments,
> 
> I've put yours into the issue tracker and Chris will made
> necessary edits shortly.
> 
> https://forge.gridforum.org/sf/go/artf5970
> 
> > I think this is a cut & paste error from Section 4.6.1. and would
> > suggest deleting it.
> 
> Yes, it should be cut & paste error. But I prefer not to delete whole
> sentence but just replace OGSA-Naming-WG by GRAAP-WG.
> 
> Thanks,
> ----
> Hiro Kishimoto
> 
> -------- Original Message  --------
> Subject: Re:[ogsa-wg] Update OGSA roadmap v1.1 draft
> From: Toshiyuki Nakata <t-nakata at cw.jp.nec.com>
> To: 'Hiro Kishimoto' <hiro.kishimoto at jp.fujitsu.com>, 'Christopher
> Jordan' <ctjordan at sdsc.edu>
> Cc: "'ogsa-wg'" <ogsa-wg at ogf.org>, jim_pruyne at hp.com,
> Wolfgang.Ziegler at scai.fraunhofer.de, ph.wieder at fz-juelich.de
> Date: 2007/08/14 17:00
> 
> > Hi Hiro:
> > 
> > CC:OGSA-WG Members + GRAAP Co-chair/Secretaries.
> > 
> > Thank you very much for including WS-Agreement Spec in the Roadmap.
> > 
> > Some comments related to WS-Agreement Spec part..
> > 
> > 
> >> 4.8	WS-Agreement Specification Version 1.0
> >> This specification defines the Web Services Agreement Specification
> > (WS-Agreement), 
> >> a Web services protocol for establishing agreement between 
> two parties, 
> >> such as between a service provider and a consumer.  
> WS-Agreement uses an
> > extensible 
> >> XML language for specifying the nature of the agreement, 
> and agreement
> > templates 
> >> to facilitate discovery of compatible agreement terms.
> > 
> >> 4.8.1	Development Schedule
> >> Version 1.0 will be released May 2007 as GFD-R.P.-107. 
> > 
> > I would suggest to change to 
> > 
> > Version 1.0 has been  released May 2007 as GFD-R.P.-107. 
> > 
> >> Changes to this document will be made by OGSA-Naming-WG. 
> > 
> > I think this is a cut & paste error from Section 4.6.1. and 
> would suggest
> > deleting it.
> > 
> > Best Regards
> > Toshi
> > 
> > -----
> > Toshiyuki Nakata 中田　登志之
> > Executive Chief Engineer, Central Research Lab. NEC
> > 1753, Shimonumabe, Nakahara-Ku,
> > Kawasaki,Kanagawa 211-8666,Japan
> > Tel +81-44-431-7653 (NEC Internal 22-60035)
> > Fax +81-44-431-7609 (NEC Internal 22-60509)
> >  
> > 
> >> -----Original Message-----
> >> From: ogsa-wg-bounces at ogf.org 
> >> [mailto:ogsa-wg-bounces at ogf.org] On Behalf Of Hiro Kishimoto
> >> Sent: Tuesday, August 14, 2007 3:03 PM
> >> To: Christopher Jordan
> >> Cc: ogsa-wg
> >> Subject: [ogsa-wg] Update OGSA roadmap v1.1 draft
> >>
> >> Hi Chris,
> >>
> >> Thank you very much for very successful OGSA roadmap review session
> >> today. We are really close to its completion.
> >>
> >> I've uploaded updated roadmap draft onto GridForege as rev 021.
> >> Please take it from here and add the finishing touch on it.
> >>
> >> https://forge.gridforum.org/sf/go/doc13733
> >>
> >> We will have really final review call on Aug. 27 (Monday).
> >>
> >> Thanks again,
> >> -- 
> >> Hiro Kishimoto
> >>
> >> --
> >>   ogsa-wg mailing list
> >>   ogsa-wg at ogf.org
> >>   http://www.ogf.org/mailman/listinfo/ogsa-wg
> >>
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 4038 bytes
Desc: not available
Url : http://www.ogf.org/pipermail/ogsa-wg/attachments/20070814/dde634fc/attachment-0001.bin