[Nsi-wg] NML issues

[John MacAuley]

Unless you want to model using individual ports each with a single label…

On 2013-09-23, at 11:22 AM, Jeroen van der Ham <vdham at uva.nl> wrote:

> No, a single Port can only have a single Label, not a set of Labels.
> 
> On the other hand, a PortGroup can have a LabelGroup with just a single Label.
> 
> So it is recommended to use PortGroups and LabelGroups.
> 
> Jeroen.
> 
> On 23 Sep 2013, at 17:04, Hans Trompert <Hans.Trompert at surfnet.nl> wrote:
> 
>> The same goes for the unidirectional port declarations, some use Port
>> and Label:
>> 
>>     <nml:Port id="urn:ogf:network:nordu.net:2013:netherlight-out">
>>       <nml:Label
>> labeltype="http://schemas.ogf.org/nml/2013/05/ethernet#vlan">1780-1783</nml:Label>
>>       <nml:Relation
>> type="http://schemas.ogf.org/nml/2013/05/base#isAlias">
>>         <nml:Port
>> id="urn:ogf:network:netherlight.net:2013:port:a-gole:testbed:nordu.net:1:in"/>
>>       </nml:Relation>
>>     </nml:Port>
>> 
>> While others use PortGroup and LabelGroup:
>> 
>>     <nml:PortGroup
>> id="urn:ogf:network:netherlight.net:2013:port:a-gole:testbed:nordu.net:1:out">
>>       <nml:LabelGroup
>> labeltype="http://schemas.ogf.org/nml/2012/10/ethernet#vlan">1779-1799</nml:LabelGroup>
>>       <nml:Relation
>> type="http://schemas.ogf.org/nml/2013/05/base#isAlias">
>>         <nml:PortGroup
>> id="urn:ogf:network:nordu.net:2013:netherlight-in"/>
>>       </nml:Relation>
>>     </nml:PortGroup>
>> 
>> Can both ways be used?
>> 
>>   HansT.
>> 
>> On 9/23/13 4:46 PM, John MacAuley wrote:
>>> Can someone explain to me which of the following two segments are
>>> correct?
>>> 
>>> 
>>> <nml:BidirectionalPortid="urn:ogf:network:netherlight.net:2013:port:a-gole:testbed:232">
>>> 
>>> <nml:PortGroupid="urn:ogf:network:netherlight.net:2013:port:a-gole:testbed:232:in"/>
>>> 
>>> <nml:PortGroupid="urn:ogf:network:netherlight.net:2013:port:a-gole:testbed:232:out"/>
>>>       </nml:BidirectionalPort>
>>> 
>>> or
>>> 
>>>       <nml:BidirectionalPortid="urn:ogf:network:ampath.net:2013:ndn">
>>>           <nml:name>ndn</nml:name>
>>>           <nml:Portid="urn:ogf:network:ampath.net:2013:ndn-in"/>
>>>           <nml:Portid="urn:ogf:network:ampath.net:2013:ndn-out"/>
>>>       </nml:BidirectionalPort>
>>> 
>>> Should Port or PortGroup be used?  We have a mix right now in our
>>> topologies.
>>> 
>>> Thanks,
>>> John
>>> 
>>> 
>>> _______________________________________________
>>> nsi-wg mailing list
>>> nsi-wg at ogf.org
>>> https://www.ogf.org/mailman/listinfo/nsi-wg
>> 
>> _______________________________________________
>> nsi-wg mailing list
>> nsi-wg at ogf.org
>> https://www.ogf.org/mailman/listinfo/nsi-wg
> 
> _______________________________________________
> nsi-wg mailing list
> nsi-wg at ogf.org
> https://www.ogf.org/mailman/listinfo/nsi-wg