[gin-ops] [gin-auth] start Savannah run

JP Navarro navarro at mcs.anl.gov
Tue Dec 5 13:44:15 CST 2006


This is 1000 ports per host. I've never run into a situation where an  
individual
host needed more than 1000 ports for Globus.

JP

On Dec 5, 2006, at 12:31 PM, Terrence Martin wrote:

> That is a very narrow range at only 1000 ports. From what I have  
> seen globus is very port wasteful, which also makes it a pain as  
> far as firewalls are concerned. It seems that the globus protocol  
> design imagined a world where there is only unfettered access to  
> services on a host.
>
> Also I have found it difficult to get all the globus related tools  
> to behave as far as ports are concerned. That is I have set things  
> like GLOBUS_TCP_PORT_RANGE in some areas only to have some other  
> tool ignore it.
>
> My policy on globus systems is to blacklist ports rather than the  
> default policy I use on other systems to whitelist ports.
>
> Terrence
>
>
> JP Navarro wrote:
>> Colin,
>>
>> UC/ANL TeraGrid GT4 client software and our services use  
>> GLOBUS_TCP_PORT_RANGE
>> of "50000,51000".
>>
>> What range does the firewall that your clients are sitting behind  
>> have open?
>> The GLOBUS_TCP_PORT_RANGE on your clients should be set to that  
>> open range.
>>
>> JP
>>
>> On Dec 5, 2006, at 1:01 AM, Colin Enticott wrote:
>>
>>> Hi Terrence,
>>>
>>> Some success.  I can submit from uaf-1.t2.ucsd.edu to all sites  
>>> using both
>>> with a generated proxy and the proxy I was trying everywhere else.
>>>
>>> The machines I was trying from are:
>>> 130.194.70.23
>>> 131.170.184.61
>>> 198.202.88.52
>>>
>>> I know the first machine has no firewall as I have exempted the  
>>> host.
>>>
>>> When we run the experiment, we will be running it from  
>>> 130.194.70.23.  I
>>> guess it comes down to an IP firewall issue, or our servers not  
>>> trusting the
>>> host cert.  I have added to my server all the CA here, am I  
>>> missing one?:
>>> http://goc.pragma-grid.net/gin/gin-resources.html
>>>
>>> Thanks,
>>> Colin
>>>
>>> ---
>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>> Room H7.26, Level 7, Building H, Monash University Caulfield  
>>> 3145, Australia
>>>
>>>
>>>> -----Original Message-----
>>>> From: Terrence Martin [mailto:tmartin at physics.ucsd.edu]
>>>> Sent: Tuesday, 5 December 2006 5:47 PM
>>>> To: Colin Enticott
>>>> Cc: 'Yoshio Tanaka'; D.Bannon at vpac.org; navarro at mcs.anl.gov; gin-
>>>> auth at ggf.org; gin-ops at ggf.org
>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>
>>>> Just to make sure I am not missing you in the log, what IP are you
>>>> coming from?
>>>>
>>>> Terrence
>>>>
>>>>
>>>>
>>>> Colin Enticott wrote:
>>>>> Thanks Yoshio,
>>>>>
>>>>> So it looks like authentication issues as I can connect to port  
>>>>> 2119 on
>>>> both
>>>>> hosts:
>>>>>
>>>>> cme at edda$ globusrun -a -r tg-grid1.uc.teragrid.org
>>>>>
>>>>> GRAM Authentication test failure: connecting to the job manager  
>>>>> failed.
>>>>> Possible reasons: job terminated, invalid job contact, network  
>>>>> problems,
>>>> ...
>>>>> cme at edda$ globusrun -a -r osg-gw-2.t2.ucsd.edu
>>>>>
>>>>> GRAM Authentication test failure: connecting to the job manager  
>>>>> failed.
>>>>> Possible reasons: job terminated, invalid job contact, network  
>>>>> problems,
>>>> ...
>>>>>
>>>>> Regards,
>>>>> Colin
>>>>>
>>>>> ---
>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield 3145,
>>>> Australia
>>>>>
>>>>>
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
>>>>>> Sent: Tuesday, 5 December 2006 12:21 PM
>>>>>> To: Colin.Enticott at csse.monash.edu.au
>>>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;  
>>>>>> navarro at mcs.anl.gov;
>>>> gin-
>>>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>>>
>>>>>>
>>>>>> Hi Colin,
>>>>>>
>>>>>> Please test the authentication by the following command:
>>>>>>
>>>>>> % globusrun -a -r osg-gw-2.t2.ucsd.edu
>>>>>>
>>>>>> % globusrun -a -r tg-grid1.uc.teragrid.org
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> -- 
>>>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
>>>>>> http://ninf.apgrid.org/
>>>>>> http://www.apgridpma.org/
>>>>>>
>>>>>>
>>>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>>> Date: Tue, 05 Dec 2006 11:44:05 +1100
>>>>>> Message-ID: <017401c71806$77cf6760$1e46c282 at nail>
>>>>>>
>>>>>>
>>>>>>> Thanks David,
>>>>>>>
>>>>>>> But still the same problem.  As you can see, my certificate  
>>>>>>> still
>>>> works
>>>>>>>
>>>>>> on
>>>>>>
>>>>>>> the vpac host and there is definitely no firewall in the way:
>>>>>>>
>>>>>>> cme at edda$ grid-proxy-init -cert usercert.pem.APACGrid -key
>>>>>>> userkey.pem.APACGrid
>>>>>>> Your identity: /C=AU/O=APACGrid/OU=Monash University/CN=Colin  
>>>>>>> Enticott
>>>>>>> Enter GRID pass phrase for this identity:
>>>>>>> Creating proxy ................................... Done
>>>>>>> Your proxy is valid until: Tue Dec  5 23:28:47 2006
>>>>>>> cme at edda$ globus-job-run osg-gw-2.t2.ucsd.edu/jobmanager-fork
>>>> /bin/uname
>>>>>>>
>>>>>> -a
>>>>>>
>>>>>>> GRAM Job submission failed because the connection to the  
>>>>>>> server failed
>>>>>>> (check host and port) (error code 12)
>>>>>>> cme at edda$ globus-job-run tg-grid1.uc.teragrid.org/jobmanager- 
>>>>>>> fork
>>>>>>>
>>>>>> /bin/uname
>>>>>>
>>>>>>> -a
>>>>>>> GRAM Job submission failed because the connection to the  
>>>>>>> server failed
>>>>>>> (check host and port) (error code 12)
>>>>>>> cme at edda$ globus-job-run ng1.vpac.org/jobmanager-fork /bin/ 
>>>>>>> uname -a
>>>>>>> Linux ng1.vpac.org 2.6.16.29-xen #4 SMP Sun Oct 15 13:20:46  
>>>>>>> BST 2006
>>>>>>>
>>>>>> i686
>>>>>>
>>>>>>> i686 i386 GNU/Linux
>>>>>>> cme at edda$ telnet tg-grid1.uc.teragrid.org 2119
>>>>>>> Trying 192.5.198.225...
>>>>>>> Connected to tg-grid1.uc.teragrid.org.
>>>>>>> Escape character is '^]'.
>>>>>>>
>>>>>>>
>>>>>>> Connection closed by foreign host.
>>>>>>> cme at edda$ telnet osg-gw-2.t2.ucsd.edu 2119
>>>>>>> Trying 137.110.141.17...
>>>>>>> Connected to osg-gw-2.t2.ucsd.edu.
>>>>>>> Escape character is '^]'.
>>>>>>>
>>>>>>>
>>>>>>> Connection closed by foreign host.
>>>>>>>
>>>>>>>
>>>>>>> Any other thoughts from anyone?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Colin
>>>>>>>
>>>>>>> ---
>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield  
>>>>>>> 3145,
>>>>>>>
>>>>>> Australia
>>>>>>
>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: David Bannon [mailto:D.Bannon at vpac.org]
>>>>>>>> Sent: Monday, 4 December 2006 6:08 PM
>>>>>>>> To: JP Navarro
>>>>>>>> Cc: Colin Enticott; gin-auth at ggf.org; gin-ops at ggf.org;  
>>>>>>>> 'Terrence
>>>>>>>>
>>>>>> Martin'
>>>>>>
>>>>>>>> Subject: Re: [gin-auth] start Savannah run
>>>>>>>>
>>>>>>>>
>>>>>>>> Colin, you can run as a Gin user on any of the VPAC  
>>>>>>>> machines, my be
>>>>>>>> easier to debug....
>>>>>>>>
>>>>>>>> David
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote:
>>>>>>>>
>>>>>>>>> Colin,
>>>>>>>>>
>>>>>>>>> The error in the logs is below. Not sure what it means.   
>>>>>>>>> Could you
>>>>>>>>> try this
>>>>>>>>> test again from your SDSC TeraGrid account so we can rule out
>>>>>>>>> software and
>>>>>>>>> firewall issues?
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> JP
>>>>>>>>>
>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>>>   PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5 (/var/globus/ 
>>>>>>>>> prews-
>>>>>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log)
>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>>>   PID: 9608 -- Notice: 6: Got connection 198.202.88.52 at  
>>>>>>>>> Thu Nov 30
>>>>>>>>> 18:49:42 2006
>>>>>>>>>
>>>>>>>>> Failed reading length 0
>>>>>>>>> GSS authentication failure
>>>>>>>>>      globus_gss_assist token :3: read failure: Connection  
>>>>>>>>> closed
>>>>>>>>> Failure: GSS failed Major:01090000 Minor:00000000 Token: 
>>>>>>>>> 00000003
>>>>>>>>>
>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>>>   PID: 9608 -- Failure: GSS failed Major:01090000 Minor: 
>>>>>>>>> 00000000
>>>>>>>>> Token:00000003
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Nov 30, 2006, at 7:05 PM, Colin Enticott wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Thanks JP,
>>>>>>>>>>
>>>>>>>>>> But I am running into some problems.  I've tried both from  
>>>>>>>>>> our
>>>>>>>>>> server and
>>>>>>>>>> rocks-52 and this is what I get:
>>>>>>>>>> [cme at rocks-52 ~]$ globus-job-run tg-grid1.uc.teragrid.org/
>>>>>>>>>> jobmanager-fork
>>>>>>>>>> /bin/uname -a
>>>>>>>>>> GRAM Job submission failed because the connection to the  
>>>>>>>>>> server
>>>>>>>>>>
>>>>>> failed
>>>>>>
>>>>>>>>>> (check host and port) (error code 12)
>>>>>>>>>> [cme at rocks-52 ~]$ grid-proxy-info
>>>>>>>>>> subject  : /C=AU/O=APACGrid/OU=Monash University/CN=Colin
>>>>>>>>>> Enticott/CN=1087048434
>>>>>>>>>> issuer   : /C=AU/O=APACGrid/OU=Monash University/CN=Colin  
>>>>>>>>>> Enticott
>>>>>>>>>> identity : /C=AU/O=APACGrid/OU=Monash University/CN=Colin  
>>>>>>>>>> Enticott
>>>>>>>>>> type     : Proxy draft (pre-RFC) compliant impersonation  
>>>>>>>>>> proxy
>>>>>>>>>> strength : 512 bits
>>>>>>>>>> path     : /home/cme/globus_proxy.APACGrid
>>>>>>>>>> timeleft : 836:30:26  (34.8 days)
>>>>>>>>>> [cme at rocks-52 ~]$ ssh tg-grid1.uc.teragrid.org
>>>>>>>>>> Warning: Permanently added 'tg- 
>>>>>>>>>> grid1.uc.teragrid.org' (RSA) to the
>>>>>>>>>> list of
>>>>>>>>>> known hosts.
>>>>>>>>>> Permission denied (external-
>>>>>>>>>>
>>>>>> keyx,gssapi,publickey,gssapi,hostbased).
>>>>>>
>>>>>>>>>> [cme at rocks-52 ~]$
>>>>>>>>>>
>>>>>>>>>> That is the certificate that I registered with.  I also  
>>>>>>>>>> tried the
>>>>>>>>>> ssh key
>>>>>>>>>> pair I put up on the pragma wiki.
>>>>>>>>>>
>>>>>>>>>> Any thoughts?
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> Colin
>>>>>>>>>>
>>>>>>>>>> ---
>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University  
>>>>>>>>>> Caulfield 3145,
>>>>>>>>>> Australia
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>> From: JP Navarro [mailto:navarro at mcs.anl.gov]
>>>>>>>>>>> Sent: Friday, 1 December 2006 2:47 AM
>>>>>>>>>>> To: Colin Enticott
>>>>>>>>>>> Cc: zhengc at sdsc.edu; 'Terrence Martin'; gin-ops at ggf.org;  
>>>>>>>>>>> 'Oscar
>>>>>>>>>>> Koeroo';
>>>>>>>>>>> gin-auth at ggf.org
>>>>>>>>>>> Subject: Re: start Savannah run
>>>>>>>>>>>
>>>>>>>>>>> Colin,
>>>>>>>>>>>
>>>>>>>>>>> You should be set to go on the UC/ANL TeraGrid cluster.
>>>>>>>>>>>
>>>>>>>>>>> GT4 Pre-WS GRAM: tg-grid1.uc.teragrid.org:2119
>>>>>>>>>>> GT4 WS GRAM:     tg-grid1.uc.teragrid.org:8443 (FORK, PBS)
>>>>>>>>>>> GT4 GridFTP:     tg-gridftp.uc.teragrid.org:2811
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> JP
>>>>>>>>>>>
>>>>>>>>>>> On Nov 30, 2006, at 2:43 AM, Colin Enticott wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Thankyou everyone.
>>>>>>>>>>>>
>>>>>>>>>>>> I am now registered on the GIN VO (well, I appear here:
>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile).
>>>>>>>>>>>>
>>>>>>>>>>>> What is my next step?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>> Colin
>>>>>>>>>>>>
>>>>>>>>>>>> ---
>>>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University  
>>>>>>>>>>>> Caulfield
>>>>>>>>>>>>
>>>>>> 3145,
>>>>>>
>>>>>>>>>>>> Australia
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc at sdsc.edu]
>>>>>>>>>>>>> Sent: Thursday, 30 November 2006 11:59 AM
>>>>>>>>>>>>> To: 'Terrence Martin'
>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org; 'Oscar Koeroo'; 'Colin
>>>>>>>>>>>>> Enticott'; gin-
>>>>>>>>>>>>> auth at ggf.org
>>>>>>>>>>>>> Subject: RE: FW: start Savannah run
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thank you, Terrence!
>>>>>>>>>>>>> We'll wait to hear from Colin when Colin finishes
>>>>>>>>>>>>> registering to gin vo.
>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>> From: Terrence Martin [mailto:tmartin at physics.ucsd.edu]
>>>>>>>>>>>>>> Sent: Wednesday, November 29, 2006 11:36 AM
>>>>>>>>>>>>>> To: Oscar Koeroo
>>>>>>>>>>>>>> Cc: zhengc at sdsc.edu; 'JP Navarro'; gin-ops at ggf.org;  
>>>>>>>>>>>>>> 'Colin
>>>>>>>>>>>>>> Enticott'; gin-auth at ggf.org
>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Oscar Koeroo wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Terrence and Cindy,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Getting new users up for registration on the GIN VO  
>>>>>>>>>>>>>>> is easy.
>>>>>>>>>>>>>>> To be
>>>>>>>>>>>>>>> able to access the secured website and for  
>>>>>>>>>>>>>>> authentication
>>>>>>>>>>>>>>>
>>>>>> reasons
>>>>>>
>>>>>>>>>>>>>>> during the registration process new users must have  
>>>>>>>>>>>>>>> their
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> certificate
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> loaded and ready in their webbrowser. The VOMS server is
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> loaded with
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> all IGTF accredited CAs including the Fermilab kCA.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Go to the website:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://kuiken.nikhef.nl:8443/voms/gin.ggf.org/ and
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> apply for a "New user registration".
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The usual VOMS configuration info is also available. I
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> don't know what
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> you'll need to populate a GUMS server. This VOMS  
>>>>>>>>>>>>>>> server is as
>>>>>>>>>>>>>>>
>>>>>> any
>>>>>>
>>>>>>>>>>>>>>> other so I guess you can use your regular setup.
>>>>>>>>>>>>>>> In addition to the secured interface I've also made  
>>>>>>>>>>>>>>> available
>>>>>>>>>>>>>>>
>>>>>> a
>>>>>>
>>>>>>>>>>>>>>> non-secured way of grabbing a grid-mapfile.
>>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile
>>>>>>>>>>>>>>> There is also an RSS-feed pointing to the grid- 
>>>>>>>>>>>>>>> mapfile and
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> the secured
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> interface at
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/feed-gin.ggf.org.xml
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Unfortunately I'm not aware of a clear guide. I do  
>>>>>>>>>>>>>>> know a
>>>>>>>>>>>>>>> guide for
>>>>>>>>>>>>>>> creating the packed certificate files that go into your
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> browser if you
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> start from a two PEM formated files (certificate file +
>>>>>>>>>>>>>>> private key
>>>>>>>>>>>>>>> file) that's at http://certificate.nikhef.nl/info/ 
>>>>>>>>>>>>>>> browser
>>>>>>>>>>>>>>> Once a user has passed that stage, the registration  
>>>>>>>>>>>>>>> for the
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> VO is as
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> trivial as any web-forum account registration.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I am assuming this user already has a grid cert since  
>>>>>>>>>>>>>> they
>>>>>>>>>>>>>> list a DN so
>>>>>>>>>>>>>> only VOMS registration is required. Once that is done  
>>>>>>>>>>>>>> either I
>>>>>>>>>>>>>> run my
>>>>>>>>>>>>>> update of GUMS manually or in 720/2 minutes on average  
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> user will be
>>>>>>>>>>>>>> automatically downloaded into my GUMS database. I  
>>>>>>>>>>>>>> actually do
>>>>>>>>>>>>>> not have
>>>>>>>>>>>>>> to do anything, but I can speed things up ever so  
>>>>>>>>>>>>>> slightly if
>>>>>>>>>>>>>>
>>>>>> I
>>>>>>
>>>>>>>>>>>>>> am in
>>>>>>>>>>>>>> the office and someone asks me to try refreshing gums.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>    Oscar
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Sounds right, Terrence. Let me ask Oscar who has  
>>>>>>>>>>>>>>>> helped me
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> with GIN
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> VO before.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi, Oscar,
>>>>>>>>>>>>>>>> Could you advise Colin what need to be done to be
>>>>>>>>>>>>>>>> added in GIN VO?
>>>>>>>>>>>>>>>> I'm also cc'ing to gin-auth list.
>>>>>>>>>>>>>>>> If there is a guide for potential GIN users, please
>>>>>>>>>>>>>>>> let me know the url and I can link it to our GINOPS
>>>>>>>>>>>>>>>> page.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>> From: Terrence Martin  
>>>>>>>>>>>>>>>>> [mailto:tmartin at physics.ucsd.edu]
>>>>>>>>>>>>>>>>>
>>>>>> Sent:
>>>>>>
>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 3:24 PM
>>>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org; 'Colin Enticott'
>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> The quickest and easiest way for me is to have him  
>>>>>>>>>>>>>>>>> added to
>>>>>>>>>>>>>>>>> a VO.
>>>>>>>>>>>>>>>>> How easy is it to add him to the GIN VO? One in  
>>>>>>>>>>>>>>>>> there I
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> can hit my
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> gums reload and he will be able to access UCSD as a  
>>>>>>>>>>>>>>>>> GIN
>>>>>>>>>>>>>>>>> user. Any
>>>>>>>>>>>>>>>>> other approach requires me hacking his DN into my  
>>>>>>>>>>>>>>>>> local
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> VO which I
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> prefer to avoid and does not help him with any  
>>>>>>>>>>>>>>>>> other site.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks, Terrence, for the quick reply!
>>>>>>>>>>>>>>>>>> Colin has not been a GIN user.
>>>>>>>>>>>>>>>>>> What do you think it's the best way to get colin  
>>>>>>>>>>>>>>>>>> access?
>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>>> From: Terrence Martin  
>>>>>>>>>>>>>>>>>>> [mailto:tmartin at physics.ucsd.edu]
>>>>>>>>>>>>>>>>>>>
>>>>>> Sent:
>>>>>>
>>>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 2:53 PM
>>>>>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
>>>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org
>>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> We only have a production cluster, but I should  
>>>>>>>>>>>>>>>>>>> still
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> able to help.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I do not seem to have Colin in my GUMS database  
>>>>>>>>>>>>>>>>>>> though
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> for
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> GIN or any
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> other VO. Should he be downloaded with GIN's users?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi, JP and Terrence,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Could you help Colin to get ready to run Savannah
>>>>>>>>>>>>>>>>>>>> application on your GIN testbed clusters?
>>>>>>>>>>>>>>>>>>>> You can find Colin's user info at
>>>>>>>>>>>>>>>>>>>> http://wiki.pragma-grid.net/index.php? 
>>>>>>>>>>>>>>>>>>>> title=ColinDetails
>>>>>>>>>>>>>>>>>>>> If you need more info or action from Colin, or have
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> any questions
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> for Colin or me, please let us know.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thank you very much!
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc at sdsc.edu] Sent:
>>>>>>>>>>>>>>>>>>>>
>>>>>> Tuesday,
>>>>>>
>>>>>>>>>>>>>>>>>>>> November 28, 2006 2:31 PM
>>>>>>>>>>>>>>>>>>>> To: 'gin-ops at ggf.org'
>>>>>>>>>>>>>>>>>>>> Subject: start Savannah run
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Dear all,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks for all the people involved to help make
>>>>>>>>>>>>>>>>>>>> TDDFT application run and GIN testbed monitoring
>>>>>>>>>>>>>>>>>>>> very fruitful experiments! We have learned a lot  
>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>
>>>>>> have
>>>>>>
>>>>>>>>>>>>>>>>>>>> presented our learnings at OGF and SC06.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Let's continue our collaborative effort with our  
>>>>>>>>>>>>>>>>>>>> plan
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> - start our
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> next experiment with Savannah
>>>>>>>>>>>>>>>>>>>> fire simulation - a data-intensive application, to
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> explore data
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> related interoperation issues.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Colin Enticott at Monash University of Australia
>>>>>>>>>>>>>>>>>>>> is the lead driver. Colin has documented the
>>>>>>>>>>>>>>>>>>>> introduction and requirements of this  
>>>>>>>>>>>>>>>>>>>> application at
>>>>>>>>>>>>>>>>>>>> http://wiki.pragma-grid.net/index.php? 
>>>>>>>>>>>>>>>>>>>> title=Savannah
>>>>>>>>>>>>>>>>>>>> or go to
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> http://forge.gridforum.org/sf/wiki/do/viewPage/
>>>>>>>>>>>>>>>>>>> projects.gin/wi
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ki/GinOps
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> click "Savannah" under "Applications",
>>>>>>>>>>>>>>>>>>> where "first Savannah experiment" is refering to
>>>>>>>>>>>>>>>>>>> a previous experiment in PRAGMA testbed. The
>>>>>>>>>>>>>>>>>>> "second Savannah experiment" is the one for GIN  
>>>>>>>>>>>>>>>>>>> testbed.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> We like to run this application on all Grids in GIN
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> testbed, but
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> in 2 steps. First, we will run it on
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> PRAGMA/TeraGrid/OSG - since
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> these should be relatively easier to do. We like  
>>>>>>>>>>>>>>>>>>> to get
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> this done
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> before the year end.
>>>>>>>>>>>>>>>>>>> The next step, Colin will work with EGEE and  
>>>>>>>>>>>>>>>>>>> Nordugrid
>>>>>>>>>>>>>>>>>>> to develop possible solutions, to enable  
>>>>>>>>>>>>>>>>>>> interoperation
>>>>>>>>>>>>>>>>>>> and to include all 5 Grids in the run.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thanks in advance for your continued help with this!
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>> -- 
>>>>>>>>>   gin-auth mailing list
>>>>>>>>>   gin-auth at ogf.org
>>>>>>>>>   http://www.ogf.org/mailman/listinfo/gin-auth
>>>>>>>>>
>>>>>>> -- 
>>>>>>>   gin-ops mailing list
>>>>>>>   gin-ops at ogf.org
>>>>>>>   http://www.ogf.org/mailman/listinfo/gin-ops
>>>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>
>>
>



More information about the gin-ops mailing list