[gin-auth] [gin-ops] start Savannah run
JP Navarro
navarro at mcs.anl.gov
Wed Jan 3 22:11:16 CST 2007
Colin,
There are two file-systems worth considering depending on your
requirements.
$TG_CLUSTER_SCRATCH (/disks/scratchgpfs1/ginuser)
~1 TB currently available
High-performance parallel file-systems
Currently not purged, but recommend you don't keep files there
long term
Not backed up
$TG_CLUSTER_HOME (/home/ginuser)
~250G free as you noted
Low performance NFS file-system
Permanent space, but also request not be used for long term
storage of large
data sets
Backed up
A typical use case is to place programs, scripts, etc in
$TG_CLUSTER_HOME, and
input and intermediate data files in $TG_CLUSTER_SCRATCH. Final run
results can
be copied from $TG_CLUSTER_SCRATCH into permanent storage (like the
TeraGrid's
SRB), or copied to $TG_CLUSTER_HOME for backup.
Regards,
JP
On Jan 3, 2007, at 6:12 PM, Colin Enticott wrote:
> Thanks JP Navarro,
>
> It is working again. Will there be any problems with using 80GB in
> /home/ginuser? There seems to be 250GB free.
>
> Regards,
> Colin
>
> ---
> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
> Room H7.26, Level 7, Building H, Monash University Caulfield 3145,
> Australia
>
>
>> -----Original Message-----
>> From: JP Navarro [mailto:navarro at mcs.anl.gov]
>> Sent: Thursday, 4 January 2007 3:00 AM
>> To: Colin Enticott
>> Cc: gin-auth at ggf.org; gin-ops at ggf.org; 'Terrence Martin';
>> zhengc at sdsc.edu
>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>
>> Colin,
>>
>> We didn't have the Monash University CA configured on tg-
>> grid1.uc.teragrid.org.
>> This has now been fixed.
>>
>> Regards,
>>
>> JP Navarro
>>
>> On Jan 3, 2007, at 2:13 AM, Colin Enticott wrote:
>>
>>> First of all, Happy new year everyone!
>>>
>>> Thankyou for your help last year.
>>>
>>> I have two quick questions:
>>>
>>> I am now receiving a "certificate expired" message from
>>> tg-grid1.uc.teragrid.org. My certificate still works elsewhere.
>>> Is it the
>>> server's certificate?
>>>
>>> And on osg-gw-2.t2.ucsd.edu, I need to write ~80GB of data for the
>>> experiment. Which directory can I use?
>>>
>>> Thanks,
>>> Colin
>>>
>>> ---
>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>> Room H7.26, Level 7, Building H, Monash University Caulfield 3145,
>>> Australia
>>>
>>>
>>>> -----Original Message-----
>>>> From: Terrence Martin [mailto:tmartin at physics.ucsd.edu]
>>>> Sent: Tuesday, 5 December 2006 5:41 PM
>>>> To: Colin Enticott
>>>> Cc: 'Yoshio Tanaka'; D.Bannon at vpac.org; navarro at mcs.anl.gov; gin-
>>>> auth at ggf.org; gin-ops at ggf.org
>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>
>>>> colin, if you want to try logging into
>>>>
>>>> colin at uaf-1.t2.ucsd.edu
>>>>
>>>> run
>>>>
>>>> source /data/vdt/setup.sh
>>>>
>>>> then grab a cert with grid-proxy-init and give it a try.
>>>>
>>>> It is the machine that all my users use to submit to my OSG site.
>>>>
>>>> Terrence
>>>>
>>>>
>>>>
>>>> Colin Enticott wrote:
>>>>> Hi Yoshio,
>>>>>
>>>>> I've tried it from 3 servers. On the server I have root access
>>>>> on, I
>>>> just
>>>>> manually synced and I am still having the problem. I am
>>>>> wondering if
>>>> the CA
>>>>> certificate I sent is okay. It's the APAC CA files we use here
>>>>> on our
>>>>> servers.
>>>>>
>>>>> On the Pragma resources, I have been using my old certificate (as
>>>> initially
>>>>> there was teething problems with the new APAC CA). Can you
>>>>> update your
>>>>> server with the details below and I'll give it a try:
>>>>>
>>>>> http://wiki.pragma-grid.net/index.php?title=ColinDetails
>>>>>
>>>>> Thanks,
>>>>> Colin
>>>>>
>>>>> ---
>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield 3145,
>>>> Australia
>>>>>
>>>>>
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
>>>>>> Sent: Tuesday, 5 December 2006 4:51 PM
>>>>>> To: Colin.Enticott at csse.monash.edu.au
>>>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;
>>>>>> navarro at mcs.anl.gov;
>>>> gin-
>>>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>>>
>>>>>>
>>>>>> Hi Colin,
>>>>>>
>>>>>> Are you able to submit jobs to PRAGMA machines?
>>>>>> If yes, the APAC CA on your machine should have no problem.
>>>>>>
>>>>>> One point that I would like to confirm is...
>>>>>> Is the time of your client machine correct? Do you use an NTP
>>>>>> server
>>>>>> for synchronize the time?
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> --
>>>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
>>>>>> http://ninf.apgrid.org/
>>>>>> http://www.apgridpma.org/
>>>>>>
>>>>>>
>>>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
>>>>>> Subject: RE: [gin-ops] [gin-auth] start Savannah run
>>>>>> Date: Tue, 05 Dec 2006 16:38:40 +1100
>>>>>> Message-ID: <01df01c7182f$9f59a3d0$1e46c282 at nail>
>>>>>>
>>>>>>
>>>>>>> Hi Yoshio,
>>>>>>>
>>>>>>> I am unable to log in. But below is what JP sent me. Any
>>>>>>> ideas on
>>>> what
>>>>>>>
>>>>>> it
>>>>>>
>>>>>>> means?
>>>>>>>
>>>>>>> Doing a Google I find:
>>>>>>> The error might arise from an expired certificate or when
>>>>>>> trying to
>>>>>>>
>>>>>> restore
>>>>>>
>>>>>>> certification expiration date and job are in some state in the
>>>>>>> Grid
>>>>>>> execution list.
>>>>>>>
>>>>>>> I guess it might be a problem with the APAC CA on your
>>>>>>> machines? Was
>>>>>>>
>>>>>> the CA
>>>>>>
>>>>>>> set up previously? Or did you use the ones on my info page?
>>>>>>> (This
>>>>>>>
>>>>>> leaves
>>>>>>
>>>>>>> the question if I packaged them correctly).
>>>>>>>
>>>>>>>
>>>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote:
>>>>>>>
>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>> PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5 (/var/globus/
>>>>>>> prews-
>>>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log)
>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>> PID: 9608 -- Notice: 6: Got connection 198.202.88.52 at Thu
>>>>>>> Nov 30
>>>>>>> 18:49:42 2006
>>>>>>>
>>>>>>> Failed reading length 0
>>>>>>> GSS authentication failure
>>>>>>> globus_gss_assist token :3: read failure: Connection closed
>>>>>>> Failure: GSS failed Major:01090000 Minor:00000000 Token:00000003
>>>>>>>
>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>> PID: 9608 -- Failure: GSS failed Major:01090000 Minor:00000000
>>>>>>> Token:00000003
>>>>>>>
>>>>>>>
>>>>>>> Colin
>>>>>>>
>>>>>>> ---
>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield
>>>>>>> 3145,
>>>>>>>
>>>>>> Australia
>>>>>>
>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
>>>>>>>> Sent: Tuesday, 5 December 2006 12:51 PM
>>>>>>>> To: Colin.Enticott at csse.monash.edu.au
>>>>>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;
>>>>>>>> navarro at mcs.anl.gov;
>>>>>>>>
>>>>>> gin-
>>>>>>
>>>>>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
>>>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi Colin,
>>>>>>>>
>>>>>>>> If you can login to these machines, see the globus
>>>>>>>> gatekeeper's log
>>>>>>>>
>>>>>> at:
>>>>>>
>>>>>>>> ${GLOBUS_LOCATION}/var/globus-gatekeeper.log
>>>>>>>>
>>>>>>>> You may find error logs such as no entry in mapfile and
>>>>>>>> failure in
>>>>>>>> tracing cert chain.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> --
>>>>>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
>>>>>>>> http://ninf.apgrid.org/
>>>>>>>> http://www.apgridpma.org/
>>>>>>>>
>>>>>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
>>>>>>>> Subject: RE: [gin-ops] [gin-auth] start Savannah run
>>>>>>>> Date: Tue, 05 Dec 2006 12:24:42 +1100
>>>>>>>> Message-ID: <01c001c7180c$24c430e0$1e46c282 at nail>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Thanks Yoshio,
>>>>>>>>>
>>>>>>>>> So it looks like authentication issues as I can connect to
>>>>>>>>> port 2119
>>>>>>>>>
>>>>>> on
>>>>>>
>>>>>>>> both
>>>>>>>>
>>>>>>>>> hosts:
>>>>>>>>>
>>>>>>>>> cme at edda$ globusrun -a -r tg-grid1.uc.teragrid.org
>>>>>>>>>
>>>>>>>>> GRAM Authentication test failure: connecting to the job
>>>>>>>>> manager
>>>>>>>>>
>>>>>> failed.
>>>>>>
>>>>>>>>> Possible reasons: job terminated, invalid job contact, network
>>>>>>>>>
>>>>>> problems,
>>>>>>
>>>>>>>> ...
>>>>>>>>
>>>>>>>>> cme at edda$ globusrun -a -r osg-gw-2.t2.ucsd.edu
>>>>>>>>>
>>>>>>>>> GRAM Authentication test failure: connecting to the job
>>>>>>>>> manager
>>>>>>>>>
>>>>>> failed.
>>>>>>
>>>>>>>>> Possible reasons: job terminated, invalid job contact, network
>>>>>>>>>
>>>>>> problems,
>>>>>>
>>>>>>>> ...
>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Colin
>>>>>>>>>
>>>>>>>>> ---
>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield
>>>>>>>>> 3145,
>>>>>>>>>
>>>>>>>> Australia
>>>>>>>>
>>>>>>>>>
>>>>>>>>>> -----Original Message-----
>>>>>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
>>>>>>>>>> Sent: Tuesday, 5 December 2006 12:21 PM
>>>>>>>>>> To: Colin.Enticott at csse.monash.edu.au
>>>>>>>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;
>>>>>>>>>>
>>>>>> navarro at mcs.anl.gov;
>>>>>>
>>>>>>>> gin-
>>>>>>>>
>>>>>>>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
>>>>>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hi Colin,
>>>>>>>>>>
>>>>>>>>>> Please test the authentication by the following command:
>>>>>>>>>>
>>>>>>>>>> % globusrun -a -r osg-gw-2.t2.ucsd.edu
>>>>>>>>>>
>>>>>>>>>> % globusrun -a -r tg-grid1.uc.teragrid.org
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
>>>>>>>>>> http://ninf.apgrid.org/
>>>>>>>>>> http://www.apgridpma.org/
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
>>>>>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
>>>>>>>>>> Date: Tue, 05 Dec 2006 11:44:05 +1100
>>>>>>>>>> Message-ID: <017401c71806$77cf6760$1e46c282 at nail>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Thanks David,
>>>>>>>>>>>
>>>>>>>>>>> But still the same problem. As you can see, my certificate
>>>>>>>>>>>
>>>>>> still
>>>>>>
>>>>>>>> works
>>>>>>>>
>>>>>>>>>> on
>>>>>>>>>>
>>>>>>>>>>> the vpac host and there is definitely no firewall in the
>>>>>>>>>>> way:
>>>>>>>>>>>
>>>>>>>>>>> cme at edda$ grid-proxy-init -cert usercert.pem.APACGrid -key
>>>>>>>>>>> userkey.pem.APACGrid
>>>>>>>>>>> Your identity: /C=AU/O=APACGrid/OU=Monash University/
>>>>>>>>>>> CN=Colin
>>>>>>>>>>>
>>>>>>>> Enticott
>>>>>>>>
>>>>>>>>>>> Enter GRID pass phrase for this identity:
>>>>>>>>>>> Creating proxy ................................... Done
>>>>>>>>>>> Your proxy is valid until: Tue Dec 5 23:28:47 2006
>>>>>>>>>>> cme at edda$ globus-job-run osg-gw-2.t2.ucsd.edu/jobmanager-
>>>>>>>>>>> fork
>>>>>>>>>>>
>>>>>>>> /bin/uname
>>>>>>>>
>>>>>>>>>> -a
>>>>>>>>>>
>>>>>>>>>>> GRAM Job submission failed because the connection to the
>>>>>>>>>>> server
>>>>>>>>>>>
>>>>>>>> failed
>>>>>>>>
>>>>>>>>>>> (check host and port) (error code 12)
>>>>>>>>>>> cme at edda$ globus-job-run tg-grid1.uc.teragrid.org/
>>>>>>>>>>> jobmanager-
>>>>>>>>>>>
>>>>>> fork
>>>>>>
>>>>>>>>>> /bin/uname
>>>>>>>>>>
>>>>>>>>>>> -a
>>>>>>>>>>> GRAM Job submission failed because the connection to the
>>>>>>>>>>> server
>>>>>>>>>>>
>>>>>>>> failed
>>>>>>>>
>>>>>>>>>>> (check host and port) (error code 12)
>>>>>>>>>>> cme at edda$ globus-job-run ng1.vpac.org/jobmanager-fork /bin/
>>>>>>>>>>> uname
>>>>>>>>>>>
>>>>>> -a
>>>>>>
>>>>>>>>>>> Linux ng1.vpac.org 2.6.16.29-xen #4 SMP Sun Oct 15 13:20:46
>>>>>>>>>>> BST
>>>>>>>>>>>
>>>>>> 2006
>>>>>>
>>>>>>>>>> i686
>>>>>>>>>>
>>>>>>>>>>> i686 i386 GNU/Linux
>>>>>>>>>>> cme at edda$ telnet tg-grid1.uc.teragrid.org 2119
>>>>>>>>>>> Trying 192.5.198.225...
>>>>>>>>>>> Connected to tg-grid1.uc.teragrid.org.
>>>>>>>>>>> Escape character is '^]'.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Connection closed by foreign host.
>>>>>>>>>>> cme at edda$ telnet osg-gw-2.t2.ucsd.edu 2119
>>>>>>>>>>> Trying 137.110.141.17...
>>>>>>>>>>> Connected to osg-gw-2.t2.ucsd.edu.
>>>>>>>>>>> Escape character is '^]'.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Connection closed by foreign host.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Any other thoughts from anyone?
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>> Colin
>>>>>>>>>>>
>>>>>>>>>>> ---
>>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield
>>>>>>>>>>>
>>>>>> 3145,
>>>>>>
>>>>>>>>>> Australia
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>> From: David Bannon [mailto:D.Bannon at vpac.org]
>>>>>>>>>>>> Sent: Monday, 4 December 2006 6:08 PM
>>>>>>>>>>>> To: JP Navarro
>>>>>>>>>>>> Cc: Colin Enticott; gin-auth at ggf.org; gin-ops at ggf.org;
>>>>>>>>>>>>
>>>>>> 'Terrence
>>>>>>
>>>>>>>>>> Martin'
>>>>>>>>>>
>>>>>>>>>>>> Subject: Re: [gin-auth] start Savannah run
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Colin, you can run as a Gin user on any of the VPAC
>>>>>>>>>>>> machines,
>>>>>>>>>>>>
>>>>>> my
>>>>>>
>>>>>>>> be
>>>>>>>>
>>>>>>>>>>>> easier to debug....
>>>>>>>>>>>>
>>>>>>>>>>>> David
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Colin,
>>>>>>>>>>>>>
>>>>>>>>>>>>> The error in the logs is below. Not sure what it means.
>>>>>>>>>>>>>
>>>>>> Could
>>>>>>
>>>>>>>> you
>>>>>>>>
>>>>>>>>>>>>> try this
>>>>>>>>>>>>> test again from your SDSC TeraGrid account so we can rule
>>>>>>>>>>>>>
>>>>>> out
>>>>>>
>>>>>>>>>>>>> software and
>>>>>>>>>>>>> firewall issues?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>
>>>>>>>>>>>>> JP
>>>>>>>>>>>>>
>>>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>>>>>>> PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5
>>>>>>>>>>>>>
>>>>>>>> (/var/globus/prews-
>>>>>>>>
>>>>>>>>>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log)
>>>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>>>>>>> PID: 9608 -- Notice: 6: Got connection 198.202.88.52 at
>>>>>>>>>>>>>
>>>>>> Thu
>>>>>>
>>>>>>>> Nov 30
>>>>>>>>
>>>>>>>>>>>>> 18:49:42 2006
>>>>>>>>>>>>>
>>>>>>>>>>>>> Failed reading length 0
>>>>>>>>>>>>> GSS authentication failure
>>>>>>>>>>>>> globus_gss_assist token :3: read failure: Connection
>>>>>>>>>>>>>
>>>>>> closed
>>>>>>
>>>>>>>>>>>>> Failure: GSS failed Major:01090000 Minor:00000000
>>>>>>>>>>>>>
>>>>>> Token:00000003
>>>>>>
>>>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
>>>>>>>>>>>>> PID: 9608 -- Failure: GSS failed Major:01090000
>>>>>>>>>>>>>
>>>>>> Minor:00000000
>>>>>>
>>>>>>>>>>>>> Token:00000003
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Nov 30, 2006, at 7:05 PM, Colin Enticott wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks JP,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> But I am running into some problems. I've tried both
>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>
>>>>>> our
>>>>>>
>>>>>>>>>>>>>> server and
>>>>>>>>>>>>>> rocks-52 and this is what I get:
>>>>>>>>>>>>>> [cme at rocks-52 ~]$ globus-job-run tg-
>>>>>>>>>>>>>> grid1.uc.teragrid.org/
>>>>>>>>>>>>>> jobmanager-fork
>>>>>>>>>>>>>> /bin/uname -a
>>>>>>>>>>>>>> GRAM Job submission failed because the connection to the
>>>>>>>>>>>>>>
>>>>>>>> server
>>>>>>>>
>>>>>>>>>> failed
>>>>>>>>>>
>>>>>>>>>>>>>> (check host and port) (error code 12)
>>>>>>>>>>>>>> [cme at rocks-52 ~]$ grid-proxy-info
>>>>>>>>>>>>>> subject : /C=AU/O=APACGrid/OU=Monash University/CN=Colin
>>>>>>>>>>>>>> Enticott/CN=1087048434
>>>>>>>>>>>>>> issuer : /C=AU/O=APACGrid/OU=Monash University/CN=Colin
>>>>>>>>>>>>>>
>>>>>>>> Enticott
>>>>>>>>
>>>>>>>>>>>>>> identity : /C=AU/O=APACGrid/OU=Monash University/CN=Colin
>>>>>>>>>>>>>>
>>>>>>>> Enticott
>>>>>>>>
>>>>>>>>>>>>>> type : Proxy draft (pre-RFC) compliant impersonation
>>>>>>>>>>>>>>
>>>>>> proxy
>>>>>>
>>>>>>>>>>>>>> strength : 512 bits
>>>>>>>>>>>>>> path : /home/cme/globus_proxy.APACGrid
>>>>>>>>>>>>>> timeleft : 836:30:26 (34.8 days)
>>>>>>>>>>>>>> [cme at rocks-52 ~]$ ssh tg-grid1.uc.teragrid.org
>>>>>>>>>>>>>> Warning: Permanently added 'tg-grid1.uc.teragrid.org'
>>>>>>>>>>>>>>
>>>>>> (RSA) to
>>>>>>
>>>>>>>> the
>>>>>>>>
>>>>>>>>>>>>>> list of
>>>>>>>>>>>>>> known hosts.
>>>>>>>>>>>>>> Permission denied (external-
>>>>>>>>>>>>>>
>>>>>>>>>> keyx,gssapi,publickey,gssapi,hostbased).
>>>>>>>>>>
>>>>>>>>>>>>>> [cme at rocks-52 ~]$
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> That is the certificate that I registered with. I also
>>>>>>>>>>>>>>
>>>>>> tried
>>>>>>
>>>>>>>> the
>>>>>>>>
>>>>>>>>>>>>>> ssh key
>>>>>>>>>>>>>> pair I put up on the pragma wiki.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Any thoughts?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>> Colin
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
>>>>>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University
>>>>>>>>>>>>>>
>>>>>> Caulfield
>>>>>>
>>>>>>>> 3145,
>>>>>>>>
>>>>>>>>>>>>>> Australia
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>> From: JP Navarro [mailto:navarro at mcs.anl.gov]
>>>>>>>>>>>>>>> Sent: Friday, 1 December 2006 2:47 AM
>>>>>>>>>>>>>>> To: Colin Enticott
>>>>>>>>>>>>>>> Cc: zhengc at sdsc.edu; 'Terrence Martin'; gin-ops at ggf.org;
>>>>>>>>>>>>>>>
>>>>>>>> 'Oscar
>>>>>>>>
>>>>>>>>>>>>>>> Koeroo';
>>>>>>>>>>>>>>> gin-auth at ggf.org
>>>>>>>>>>>>>>> Subject: Re: start Savannah run
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Colin,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> You should be set to go on the UC/ANL TeraGrid cluster.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> GT4 Pre-WS GRAM: tg-grid1.uc.teragrid.org:2119
>>>>>>>>>>>>>>> GT4 WS GRAM: tg-grid1.uc.teragrid.org:8443 (FORK,
>>>>>>>>>>>>>>>
>>>>>> PBS)
>>>>>>
>>>>>>>>>>>>>>> GT4 GridFTP: tg-gridftp.uc.teragrid.org:2811
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> JP
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Nov 30, 2006, at 2:43 AM, Colin Enticott wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thankyou everyone.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I am now registered on the GIN VO (well, I appear here:
>>>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile).
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> What is my next step?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>> Colin
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903
>>>>>>>>>>>>>>>> 2215
>>>>>>>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University
>>>>>>>>>>>>>>>>
>>>>>> Caulfield
>>>>>>
>>>>>>>>>> 3145,
>>>>>>>>>>
>>>>>>>>>>>>>>>> Australia
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc at sdsc.edu]
>>>>>>>>>>>>>>>>> Sent: Thursday, 30 November 2006 11:59 AM
>>>>>>>>>>>>>>>>> To: 'Terrence Martin'
>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org; 'Oscar Koeroo';
>>>>>>>>>>>>>>>>>
>>>>>> 'Colin
>>>>>>
>>>>>>>>>>>>>>>>> Enticott'; gin-
>>>>>>>>>>>>>>>>> auth at ggf.org
>>>>>>>>>>>>>>>>> Subject: RE: FW: start Savannah run
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thank you, Terrence!
>>>>>>>>>>>>>>>>> We'll wait to hear from Colin when Colin finishes
>>>>>>>>>>>>>>>>> registering to gin vo.
>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>> From: Terrence Martin
>>>>>>>>>>>>>>>>>>
>>>>>> [mailto:tmartin at physics.ucsd.edu]
>>>>>>
>>>>>>>>>>>>>>>>>> Sent: Wednesday, November 29, 2006 11:36 AM
>>>>>>>>>>>>>>>>>> To: Oscar Koeroo
>>>>>>>>>>>>>>>>>> Cc: zhengc at sdsc.edu; 'JP Navarro'; gin-ops at ggf.org;
>>>>>>>>>>>>>>>>>>
>>>>>> 'Colin
>>>>>>
>>>>>>>>>>>>>>>>>> Enticott'; gin-auth at ggf.org
>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Oscar Koeroo wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi Terrence and Cindy,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Getting new users up for registration on the GIN VO
>>>>>>>>>>>>>>>>>>>
>>>>>> is
>>>>>>
>>>>>>>> easy.
>>>>>>>>
>>>>>>>>>>>>>>>>>>> To be
>>>>>>>>>>>>>>>>>>> able to access the secured website and for
>>>>>>>>>>>>>>>>>>>
>>>>>> authentication
>>>>>>
>>>>>>>>>> reasons
>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> during the registration process new users must have
>>>>>>>>>>>>>>>>>>>
>>>>>> their
>>>>>>
>>>>>>>>>>>>>>>>>> certificate
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> loaded and ready in their webbrowser. The VOMS
>>>>>>>>>>>>>>>>>>> server
>>>>>>>>>>>>>>>>>>>
>>>>>> is
>>>>>>
>>>>>>>>>>>>>>>>>> loaded with
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> all IGTF accredited CAs including the Fermilab kCA.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Go to the website:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> https://kuiken.nikhef.nl:8443/voms/gin.ggf.org/ and
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> apply for a "New user registration".
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> The usual VOMS configuration info is also available.
>>>>>>>>>>>>>>>>>>>
>>>>>> I
>>>>>>
>>>>>>>>>>>>>>>>>> don't know what
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> you'll need to populate a GUMS server. This VOMS
>>>>>>>>>>>>>>>>>>>
>>>>>> server
>>>>>>
>>>>>>>> is as
>>>>>>>>
>>>>>>>>>> any
>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> other so I guess you can use your regular setup.
>>>>>>>>>>>>>>>>>>> In addition to the secured interface I've also made
>>>>>>>>>>>>>>>>>>>
>>>>>>>> available
>>>>>>>>
>>>>>>>>>> a
>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> non-secured way of grabbing a grid-mapfile.
>>>>>>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile
>>>>>>>>>>>>>>>>>>> There is also an RSS-feed pointing to the grid-
>>>>>>>>>>>>>>>>>>>
>>>>>> mapfile
>>>>>>
>>>>>>>> and
>>>>>>>>
>>>>>>>>>>>>>>>>>> the secured
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> interface at
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/feed-
>>>>>>>>>>>>>>>>>>
>>>>>> gin.ggf.org.xml
>>>>>>
>>>>>>>>>>>>>>>>>>> Unfortunately I'm not aware of a clear guide. I do
>>>>>>>>>>>>>>>>>>>
>>>>>> know a
>>>>>>
>>>>>>>>>>>>>>>>>>> guide for
>>>>>>>>>>>>>>>>>>> creating the packed certificate files that go into
>>>>>>>>>>>>>>>>>>>
>>>>>> your
>>>>>>
>>>>>>>>>>>>>>>>>> browser if you
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> start from a two PEM formated files (certificate
>>>>>>>>>>>>>>>>>>> file
>>>>>>>>>>>>>>>>>>>
>>>>>> +
>>>>>>
>>>>>>>>>>>>>>>>>>> private key
>>>>>>>>>>>>>>>>>>> file) that's at
>>>>>>>>>>>>>>>>>>>
>>>>>> http://certificate.nikhef.nl/info/browser
>>>>>>
>>>>>>>>>>>>>>>>>>> Once a user has passed that stage, the registration
>>>>>>>>>>>>>>>>>>>
>>>>>> for
>>>>>>
>>>>>>>> the
>>>>>>>>
>>>>>>>>>>>>>>>>>> VO is as
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> trivial as any web-forum account registration.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I am assuming this user already has a grid cert since
>>>>>>>>>>>>>>>>>>
>>>>>> they
>>>>>>
>>>>>>>>>>>>>>>>>> list a DN so
>>>>>>>>>>>>>>>>>> only VOMS registration is required. Once that is done
>>>>>>>>>>>>>>>>>>
>>>>>>>> either I
>>>>>>>>
>>>>>>>>>>>>>>>>>> run my
>>>>>>>>>>>>>>>>>> update of GUMS manually or in 720/2 minutes on
>>>>>>>>>>>>>>>>>> average
>>>>>>>>>>>>>>>>>>
>>>>>> the
>>>>>>
>>>>>>>>>>>>>>>>>> user will be
>>>>>>>>>>>>>>>>>> automatically downloaded into my GUMS database. I
>>>>>>>>>>>>>>>>>>
>>>>>> actually
>>>>>>
>>>>>>>> do
>>>>>>>>
>>>>>>>>>>>>>>>>>> not have
>>>>>>>>>>>>>>>>>> to do anything, but I can speed things up ever so
>>>>>>>>>>>>>>>>>>
>>>>>> slightly
>>>>>>
>>>>>>>> if
>>>>>>>>
>>>>>>>>>> I
>>>>>>>>>>
>>>>>>>>>>>>>>>>>> am in
>>>>>>>>>>>>>>>>>> the office and someone asks me to try refreshing
>>>>>>>>>>>>>>>>>> gums.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Oscar
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Sounds right, Terrence. Let me ask Oscar who has
>>>>>>>>>>>>>>>>>>>>
>>>>>> helped
>>>>>>
>>>>>>>> me
>>>>>>>>
>>>>>>>>>>>>>>>>>> with GIN
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> VO before.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi, Oscar,
>>>>>>>>>>>>>>>>>>>> Could you advise Colin what need to be done to be
>>>>>>>>>>>>>>>>>>>> added in GIN VO?
>>>>>>>>>>>>>>>>>>>> I'm also cc'ing to gin-auth list.
>>>>>>>>>>>>>>>>>>>> If there is a guide for potential GIN users, please
>>>>>>>>>>>>>>>>>>>> let me know the url and I can link it to our GINOPS
>>>>>>>>>>>>>>>>>>>> page.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>>>>> From: Terrence Martin
>>>>>>>>>>>>>>>>>>>>>
>>>>>> [mailto:tmartin at physics.ucsd.edu]
>>>>>>
>>>>>>>>>> Sent:
>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 3:24 PM
>>>>>>>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
>>>>>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org; 'Colin
>>>>>>>>>>>>>>>>>>>>> Enticott'
>>>>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> The quickest and easiest way for me is to have him
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> added to
>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> a VO.
>>>>>>>>>>>>>>>>>>>>> How easy is it to add him to the GIN VO? One in
>>>>>>>>>>>>>>>>>>>>>
>>>>>> there I
>>>>>>
>>>>>>>>>>>>>>>>>> can hit my
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> gums reload and he will be able to access UCSD
>>>>>>>>>>>>>>>>>>>>> as a
>>>>>>>>>>>>>>>>>>>>>
>>>>>> GIN
>>>>>>
>>>>>>>>>>>>>>>>>>>>> user. Any
>>>>>>>>>>>>>>>>>>>>> other approach requires me hacking his DN into my
>>>>>>>>>>>>>>>>>>>>>
>>>>>> local
>>>>>>
>>>>>>>>>>>>>>>>>> VO which I
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> prefer to avoid and does not help him with any
>>>>>>>>>>>>>>>>>>>>>
>>>>>> other
>>>>>>
>>>>>>>> site.
>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Thanks, Terrence, for the quick reply!
>>>>>>>>>>>>>>>>>>>>>> Colin has not been a GIN user.
>>>>>>>>>>>>>>>>>>>>>> What do you think it's the best way to get colin
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> access?
>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>>>>>>> From: Terrence Martin
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> [mailto:tmartin at physics.ucsd.edu]
>>>>>>>>
>>>>>>>>>> Sent:
>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 2:53 PM
>>>>>>>>>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
>>>>>>>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org
>>>>>>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> We only have a production cluster, but I should
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> still
>>>>>>
>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> able to help.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I do not seem to have Colin in my GUMS database
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> though
>>>>>>>>
>>>>>>>>>>>>>>>>>> for
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> GIN or any
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> other VO. Should he be downloaded with GIN's
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> users?
>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Terrence
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Hi, JP and Terrence,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Could you help Colin to get ready to run
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> Savannah
>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> application on your GIN testbed clusters?
>>>>>>>>>>>>>>>>>>>>>>>> You can find Colin's user info at
>>>>>>>>>>>>>>>>>>>>>>>> http://wiki.pragma-
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> grid.net/index.php?title=ColinDetails
>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> If you need more info or action from Colin, or
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> have
>>>>>>
>>>>>>>>>>>>>>>>>> any questions
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> for Colin or me, please let us know.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Thank you very much!
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc at sdsc.edu]
>>>>>>>>>>>>>>>>>>>>>>>> Sent:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>> Tuesday,
>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> November 28, 2006 2:31 PM
>>>>>>>>>>>>>>>>>>>>>>>> To: 'gin-ops at ggf.org'
>>>>>>>>>>>>>>>>>>>>>>>> Subject: start Savannah run
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Dear all,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Thanks for all the people involved to help make
>>>>>>>>>>>>>>>>>>>>>>>> TDDFT application run and GIN testbed
>>>>>>>>>>>>>>>>>>>>>>>> monitoring
>>>>>>>>>>>>>>>>>>>>>>>> very fruitful experiments! We have learned a
>>>>>>>>>>>>>>>>>>>>>>>> lot
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> and
>>>>>>
>>>>>>>>>> have
>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> presented our learnings at OGF and SC06.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Let's continue our collaborative effort with
>>>>>>>>>>>>>>>>>>>>>>>> our
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> plan
>>>>>>>>
>>>>>>>>>>>>>>>>>> - start our
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> next experiment with Savannah
>>>>>>>>>>>>>>>>>>>>>>>> fire simulation - a data-intensive application,
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> to
>>>>>>
>>>>>>>>>>>>>>>>>> explore data
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> related interoperation issues.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Colin Enticott at Monash University of
>>>>>>>>>>>>>>>>>>>>>>>> Australia
>>>>>>>>>>>>>>>>>>>>>>>> is the lead driver. Colin has documented the
>>>>>>>>>>>>>>>>>>>>>>>> introduction and requirements of this
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> application at
>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> http://wiki.pragma-
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> grid.net/index.php?title=Savannah
>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> or go to
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> http://forge.gridforum.org/sf/wiki/do/viewPage/
>>>>>>>>>>>>>>>>>>>>>>> projects.gin/wi
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> ki/GinOps
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> click "Savannah" under "Applications",
>>>>>>>>>>>>>>>>>>>>>>> where "first Savannah experiment" is refering to
>>>>>>>>>>>>>>>>>>>>>>> a previous experiment in PRAGMA testbed. The
>>>>>>>>>>>>>>>>>>>>>>> "second Savannah experiment" is the one for GIN
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> testbed.
>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> We like to run this application on all Grids in
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> GIN
>>>>>>
>>>>>>>>>>>>>>>>>> testbed, but
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> in 2 steps. First, we will run it on
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> PRAGMA/TeraGrid/OSG - since
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> these should be relatively easier to do. We like
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> to
>>>>>>
>>>>>>>> get
>>>>>>>>
>>>>>>>>>>>>>>>>>> this done
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> before the year end.
>>>>>>>>>>>>>>>>>>>>>>> The next step, Colin will work with EGEE and
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> Nordugrid
>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> to develop possible solutions, to enable
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>> interoperation
>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> and to include all 5 Grids in the run.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance for your continued help with
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>> this!
>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Cindy
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> gin-auth mailing list
>>>>>>>>>>>>> gin-auth at ogf.org
>>>>>>>>>>>>> http://www.ogf.org/mailman/listinfo/gin-auth
>>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> gin-ops mailing list
>>>>>>>>>>> gin-ops at ogf.org
>>>>>>>>>>> http://www.ogf.org/mailman/listinfo/gin-ops
>>>>>>>>>>>
>>>>>
>>>>>
>>>>>
>>>
>
More information about the gin-auth
mailing list