[gin-auth] [gin-ops] start Savannah run

Cindy Zheng zhengc at sdsc.edu
Wed Dec 6 13:36:49 CST 2006


Agree and the page has been modified.
Thank you, all!
Cindy

> -----Original Message-----
> From: Oscar Koeroo [mailto:okoeroo at nikhef.nl] 
> Sent: Wednesday, December 06, 2006 12:39 AM
> To: zhengc at sdsc.edu
> Cc: 'Colin Enticott'; 'Yoshio Tanaka'; 
> tmartin at physics.ucsd.edu; 'JP Navarro'; D.Bannon at vpac.org; 
> gin-auth at ggf.org; gin-ops at ggf.org
> Subject: Re: [gin-ops] [gin-auth] start Savannah run
> 
> 
> Hi,
> 
> To get this working properly I suggest we all take the IGTF CAs as a 
> base to get this activity working since we've agreed (a while ago) to 
> use the IGTF CAs as our base of trust.
> The IGTF link: http://www.gridpma.org/
> 
> cheers,
> 
>     Oscar
> 
> 
> 
> Cindy Zheng wrote:
> > Thank you, Colin!
> > Perhaps we should just provide one link to IGTF
> > distribution and recommend the installation of 
> > all IGTF CAs.
> > I'll modify that soon.
> > Cindy
> >
> >   
> >> -----Original Message-----
> >> From: Colin Enticott [mailto:Colin.Enticott at csse.monash.edu.au] 
> >> Sent: Tuesday, December 05, 2006 5:08 PM
> >> To: zhengc at sdsc.edu; 'Yoshio Tanaka'; 
> >> tmartin at physics.ucsd.edu; 'JP Navarro'; D.Bannon at vpac.org
> >> Cc: gin-auth at ggf.org; gin-ops at ggf.org
> >> Subject: RE: [gin-ops] [gin-auth] start Savannah run
> >>
> >>
> >> Hi Cindy,
> >>
> >> Thanks for that.  I do need my new certificate mapped in any 
> >> event, but it
> >> turns out it was a problem was with the CA.  It looks like 
> >> you should add
> >> DOEGrids CA (d1b603c30) to your website
> >> http://goc.pragma-grid.net/gin/gin-resources.html.  I 
> >> shouldn't send you the
> >> files I have as I just copied them from a host.  It might be 
> >> best to get
> >> them through official channels.
> >>
> >> Thanks again,
> >> Colin
> >>
> >> ---
> >> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
> >> Room H7.26, Level 7, Building H, Monash University Caulfield 
> >> 3145, Australia
> >>
> >>
> >>     
> >>> -----Original Message-----
> >>> From: Cindy Zheng [mailto:zhengc at sdsc.edu]
> >>> Sent: Wednesday, 6 December 2006 6:14 AM
> >>> To: 'Colin Enticott'; 'Yoshio Tanaka'; 
> tmartin at physics.ucsd.edu; 'JP
> >>> Navarro'; D.Bannon at vpac.org
> >>> Cc: gin-auth at ggf.org; gin-ops at ggf.org
> >>> Subject: RE: [gin-ops] [gin-auth] start Savannah run
> >>>
> >>> Thank you, everyone, for helping out!
> >>>
> >>> Hi, Colin,
> >>>
> >>> Your certificate and DN on rocks-52 was/is from APAC-CA.
> >>> I did diff between files in your package and the files
> >>> in our certificate directory, they are the same.
> >>> But the DN string you used on rocks-52 before was/is
> >>> "/C=AU/O=APAC-GRID/OU=Monash/CN=Colin Enticott"
> >>> A little bit different than the one you specified in
> >>> your wiki page.
> >>> I have added your new DN string
> >>> "/C=AU/O=APACGrid/OU=Monash University/CN=Colin Enticott"
> >>> in the grid-mapfile on rocks-52. So now you have both
> >>> DN strings mapped to your account here.
> >>>
> >>> You can test your access to rocks-52. Let me know if
> >>> you like me to remove your old DN string or not.
> >>>
> >>> Cindy
> >>>
> >>>       
> >>>> -----Original Message-----
> >>>> From: gin-ops-bounces at ogf.org
> >>>> [mailto:gin-ops-bounces at ogf.org] On Behalf Of Colin Enticott
> >>>> Sent: Monday, December 04, 2006 10:25 PM
> >>>> To: 'Yoshio Tanaka'
> >>>> Cc: gin-auth at ggf.org; D.Bannon at vpac.org; gin-ops at ggf.org;
> >>>> tmartin at physics.ucsd.edu
> >>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
> >>>>
> >>>>
> >>>> Hi Yoshio,
> >>>>
> >>>> I've tried it from 3 servers.  On the server I have root
> >>>> access on, I just
> >>>> manually synced and I am still having the problem.  I am
> >>>> wondering if the CA
> >>>> certificate I sent is okay.  It's the APAC CA files we 
> >>>>         
> >> use here on our
> >>     
> >>>> servers.
> >>>>
> >>>> On the Pragma resources, I have been using my old certificate
> >>>> (as initially
> >>>> there was teething problems with the new APAC CA).  Can you
> >>>> update your
> >>>> server with the details below and I'll give it a try:
> >>>>
> >>>> http://wiki.pragma-grid.net/index.php?title=ColinDetails
> >>>>
> >>>> Thanks,
> >>>> Colin
> >>>>
> >>>> ---
> >>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
> >>>> Room H7.26, Level 7, Building H, Monash University Caulfield
> >>>> 3145, Australia
> >>>>
> >>>>
> >>>>         
> >>>>> -----Original Message-----
> >>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
> >>>>> Sent: Tuesday, 5 December 2006 4:51 PM
> >>>>> To: Colin.Enticott at csse.monash.edu.au
> >>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;
> >>>>>           
> >>>> navarro at mcs.anl.gov; gin-
> >>>>         
> >>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
> >>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
> >>>>>
> >>>>>
> >>>>> Hi Colin,
> >>>>>
> >>>>> Are you able to submit jobs to PRAGMA machines?
> >>>>> If yes, the APAC CA on your machine should have no problem.
> >>>>>
> >>>>> One point that I would like to confirm is...
> >>>>> Is the time of your client machine correct?  Do you use an
> >>>>>           
> >>>> NTP server
> >>>>         
> >>>>> for synchronize the time?
> >>>>>
> >>>>> Thanks,
> >>>>>
> >>>>> --
> >>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
> >>>>> http://ninf.apgrid.org/
> >>>>> http://www.apgridpma.org/
> >>>>>
> >>>>>
> >>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
> >>>>> Subject: RE: [gin-ops] [gin-auth] start Savannah run
> >>>>> Date: Tue, 05 Dec 2006 16:38:40 +1100
> >>>>> Message-ID: <01df01c7182f$9f59a3d0$1e46c282 at nail>
> >>>>>
> >>>>>           
> >>>>>> Hi Yoshio,
> >>>>>>
> >>>>>> I am unable to log in. But below is what JP sent me.  Any
> >>>>>>             
> >>>> ideas on what
> >>>>         
> >>>>> it
> >>>>>           
> >>>>>> means?
> >>>>>>
> >>>>>> Doing a Google I find:
> >>>>>> The error might arise from an expired certificate or when
> >>>>>>             
> >>>> trying to
> >>>>         
> >>>>> restore
> >>>>>           
> >>>>>> certification expiration date and job are in some state
> >>>>>>             
> >>>> in the Grid
> >>>>         
> >>>>>> execution list.
> >>>>>>
> >>>>>> I guess it might be a problem with the APAC CA on your
> >>>>>>             
> >>>> machines?  Was
> >>>>         
> >>>>> the CA
> >>>>>           
> >>>>>> set up previously?  Or did you use the ones on my 
> >>>>>>             
> >> info page? (This
> >>     
> >>>>> leaves
> >>>>>           
> >>>>>> the question if I packaged them correctly).
> >>>>>>
> >>>>>>
> >>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote:
> >>>>>>
> >>>>>> TIME: Thu Nov 30 18:49:42 2006
> >>>>>>   PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5 
> >>>>>>             
> >> (/var/globus/prews-
> >>     
> >>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log)
> >>>>>> TIME: Thu Nov 30 18:49:42 2006
> >>>>>>   PID: 9608 -- Notice: 6: Got connection 198.202.88.52 at
> >>>>>>             
> >>>> Thu Nov 30
> >>>>         
> >>>>>> 18:49:42 2006
> >>>>>>
> >>>>>> Failed reading length 0
> >>>>>> GSS authentication failure
> >>>>>>      globus_gss_assist token :3: read failure: 
> >>>>>>             
> >> Connection closed
> >>     
> >>>>>> Failure: GSS failed Major:01090000 Minor:00000000 
> >>>>>>             
> >> Token:00000003
> >>     
> >>>>>> TIME: Thu Nov 30 18:49:42 2006
> >>>>>>   PID: 9608 -- Failure: GSS failed Major:01090000 
> >>>>>>             
> >> Minor:00000000
> >>     
> >>>>>> Token:00000003
> >>>>>>
> >>>>>>
> >>>>>> Colin
> >>>>>>
> >>>>>> ---
> >>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
> >>>>>> Room H7.26, Level 7, Building H, Monash University 
> >>>>>>             
> >> Caulfield 3145,
> >>     
> >>>>> Australia
> >>>>>           
> >>>>>>             
> >>>>>>> -----Original Message-----
> >>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
> >>>>>>> Sent: Tuesday, 5 December 2006 12:51 PM
> >>>>>>> To: Colin.Enticott at csse.monash.edu.au
> >>>>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;
> >>>>>>>               
> >>>> navarro at mcs.anl.gov;
> >>>>         
> >>>>> gin-
> >>>>>           
> >>>>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
> >>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
> >>>>>>>
> >>>>>>>
> >>>>>>> Hi Colin,
> >>>>>>>
> >>>>>>> If you can login to these machines, see the globus
> >>>>>>>               
> >>>> gatekeeper's log
> >>>>         
> >>>>> at:
> >>>>>           
> >>>>>>> ${GLOBUS_LOCATION}/var/globus-gatekeeper.log
> >>>>>>>
> >>>>>>> You may find error logs such as no entry in mapfile and
> >>>>>>>               
> >>>> failure in
> >>>>         
> >>>>>>> tracing cert chain.
> >>>>>>>
> >>>>>>> Regards,
> >>>>>>>
> >>>>>>> --
> >>>>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
> >>>>>>> http://ninf.apgrid.org/
> >>>>>>> http://www.apgridpma.org/
> >>>>>>>
> >>>>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
> >>>>>>> Subject: RE: [gin-ops] [gin-auth] start Savannah run
> >>>>>>> Date: Tue, 05 Dec 2006 12:24:42 +1100
> >>>>>>> Message-ID: <01c001c7180c$24c430e0$1e46c282 at nail>
> >>>>>>>
> >>>>>>>               
> >>>>>>>> Thanks Yoshio,
> >>>>>>>>
> >>>>>>>> So it looks like authentication issues as I can
> >>>>>>>>                 
> >>>> connect to port 2119
> >>>>         
> >>>>> on
> >>>>>           
> >>>>>>> both
> >>>>>>>               
> >>>>>>>> hosts:
> >>>>>>>>
> >>>>>>>> cme at edda$ globusrun -a -r tg-grid1.uc.teragrid.org
> >>>>>>>>
> >>>>>>>> GRAM Authentication test failure: connecting to the
> >>>>>>>>                 
> >>>> job manager
> >>>>         
> >>>>> failed.
> >>>>>           
> >>>>>>>> Possible reasons: job terminated, invalid job 
> >>>>>>>>                 
> >> contact, network
> >>     
> >>>>> problems,
> >>>>>           
> >>>>>>> ...
> >>>>>>>               
> >>>>>>>> cme at edda$ globusrun -a -r osg-gw-2.t2.ucsd.edu
> >>>>>>>>
> >>>>>>>> GRAM Authentication test failure: connecting to the
> >>>>>>>>                 
> >>>> job manager
> >>>>         
> >>>>> failed.
> >>>>>           
> >>>>>>>> Possible reasons: job terminated, invalid job 
> >>>>>>>>                 
> >> contact, network
> >>     
> >>>>> problems,
> >>>>>           
> >>>>>>> ...
> >>>>>>>               
> >>>>>>>> Regards,
> >>>>>>>> Colin
> >>>>>>>>
> >>>>>>>> ---
> >>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215
> >>>>>>>> Room H7.26, Level 7, Building H, Monash University
> >>>>>>>>                 
> >>>> Caulfield 3145,
> >>>>         
> >>>>>>> Australia
> >>>>>>>               
> >>>>>>>>                 
> >>>>>>>>> -----Original Message-----
> >>>>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka at aist.go.jp]
> >>>>>>>>> Sent: Tuesday, 5 December 2006 12:21 PM
> >>>>>>>>> To: Colin.Enticott at csse.monash.edu.au
> >>>>>>>>> Cc: D.Bannon at vpac.org; tmartin at physics.ucsd.edu;
> >>>>>>>>>                   
> >>>>> navarro at mcs.anl.gov;
> >>>>>           
> >>>>>>> gin-
> >>>>>>>               
> >>>>>>>>> auth at ggf.org; gin-ops at ggf.org; yoshio.tanaka at aist.go.jp
> >>>>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Hi Colin,
> >>>>>>>>>
> >>>>>>>>> Please test the authentication by the following command:
> >>>>>>>>>
> >>>>>>>>> % globusrun -a -r osg-gw-2.t2.ucsd.edu
> >>>>>>>>>
> >>>>>>>>> % globusrun -a -r tg-grid1.uc.teragrid.org
> >>>>>>>>>
> >>>>>>>>> Thanks,
> >>>>>>>>>
> >>>>>>>>> --
> >>>>>>>>> Yoshio Tanaka (yoshio.tanaka at aist.go.jp)
> >>>>>>>>> http://ninf.apgrid.org/
> >>>>>>>>> http://www.apgridpma.org/
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> From: Colin Enticott <Colin.Enticott at csse.monash.edu.au>
> >>>>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run
> >>>>>>>>> Date: Tue, 05 Dec 2006 11:44:05 +1100
> >>>>>>>>> Message-ID: <017401c71806$77cf6760$1e46c282 at nail>
> >>>>>>>>>
> >>>>>>>>>                   
> >>>>>>>>>> Thanks David,
> >>>>>>>>>>
> >>>>>>>>>> But still the same problem.  As you can see, my
> >>>>>>>>>>                     
> >>>> certificate
> >>>>         
> >>>>> still
> >>>>>           
> >>>>>>> works
> >>>>>>>               
> >>>>>>>>> on
> >>>>>>>>>                   
> >>>>>>>>>> the vpac host and there is definitely no firewall
> >>>>>>>>>>                     
> >>>> in the way:
> >>>>         
> >>>>>>>>>> cme at edda$ grid-proxy-init -cert 
> >>>>>>>>>>                     
> >> usercert.pem.APACGrid -key
> >>     
> >>>>>>>>>> userkey.pem.APACGrid
> >>>>>>>>>> Your identity: /C=AU/O=APACGrid/OU=Monash
> >>>>>>>>>>                     
> >>>> University/CN=Colin
> >>>>         
> >>>>>>> Enticott
> >>>>>>>               
> >>>>>>>>>> Enter GRID pass phrase for this identity:
> >>>>>>>>>> Creating proxy 
> >>>>>>>>>>                     
> >> ................................... Done
> >>     
> >>>>>>>>>> Your proxy is valid until: Tue Dec  5 23:28:47 2006
> >>>>>>>>>> cme at edda$ globus-job-run
> >>>>>>>>>>                     
> >>>> osg-gw-2.t2.ucsd.edu/jobmanager-fork
> >>>>         
> >>>>>>> /bin/uname
> >>>>>>>               
> >>>>>>>>> -a
> >>>>>>>>>                   
> >>>>>>>>>> GRAM Job submission failed because the connection
> >>>>>>>>>>                     
> >>>> to the server
> >>>>         
> >>>>>>> failed
> >>>>>>>               
> >>>>>>>>>> (check host and port) (error code 12)
> >>>>>>>>>> cme at edda$ globus-job-run
> >>>>>>>>>>                     
> >>>> tg-grid1.uc.teragrid.org/jobmanager-
> >>>>         
> >>>>> fork
> >>>>>           
> >>>>>>>>> /bin/uname
> >>>>>>>>>                   
> >>>>>>>>>> -a
> >>>>>>>>>> GRAM Job submission failed because the connection
> >>>>>>>>>>                     
> >>>> to the server
> >>>>         
> >>>>>>> failed
> >>>>>>>               
> >>>>>>>>>> (check host and port) (error code 12)
> >>>>>>>>>> cme at edda$ globus-job-run
> >>>>>>>>>>                     
> >>>> ng1.vpac.org/jobmanager-fork /bin/uname
> >>>>         
> >>>>> -a
> >>>>>           
> >>>>>>>>>> Linux ng1.vpac.org 2.6.16.29-xen #4 SMP Sun Oct
> >>>>>>>>>>                     
> >>>> 15 13:20:46 BST
> >>>>         
> >>>>> 2006
> >>>>>           
> >>>>>>>>> i686
> >>>>>>>>>                   
> >>>>>>>>>> i686 i386 GNU/Linux
> >>>>>>>>>> cme at edda$ telnet tg-grid1.uc.teragrid.org 2119
> >>>>>>>>>> Trying 192.5.198.225...
> >>>>>>>>>> Connected to tg-grid1.uc.teragrid.org.
> >>>>>>>>>> Escape character is '^]'.
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> Connection closed by foreign host.
> >>>>>>>>>> cme at edda$ telnet osg-gw-2.t2.ucsd.edu 2119
> >>>>>>>>>> Trying 137.110.141.17...
> >>>>>>>>>> Connected to osg-gw-2.t2.ucsd.edu.
> >>>>>>>>>> Escape character is '^]'.
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> Connection closed by foreign host.
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> Any other thoughts from anyone?
> >>>>>>>>>>
> >>>>>>>>>> Thanks,
> >>>>>>>>>> Colin
> >>>>>>>>>>
> >>>>>>>>>> ---
> >>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 
> >>>>>>>>>>                     
> >> 03 9903 2215
> >>     
> >>>>>>>>>> Room H7.26, Level 7, Building H, Monash
> >>>>>>>>>>                     
> >>>> University Caulfield
> >>>>         
> >>>>> 3145,
> >>>>>           
> >>>>>>>>> Australia
> >>>>>>>>>                   
> >>>>>>>>>>                     
> >>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>> From: David Bannon [mailto:D.Bannon at vpac.org]
> >>>>>>>>>>> Sent: Monday, 4 December 2006 6:08 PM
> >>>>>>>>>>> To: JP Navarro
> >>>>>>>>>>> Cc: Colin Enticott; gin-auth at ggf.org; 
> >>>>>>>>>>>                       
> >> gin-ops at ggf.org;
> >>     
> >>>>> 'Terrence
> >>>>>           
> >>>>>>>>> Martin'
> >>>>>>>>>                   
> >>>>>>>>>>> Subject: Re: [gin-auth] start Savannah run
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Colin, you can run as a Gin user on any of the
> >>>>>>>>>>>                       
> >>>> VPAC machines,
> >>>>         
> >>>>> my
> >>>>>           
> >>>>>>> be
> >>>>>>>               
> >>>>>>>>>>> easier to debug....
> >>>>>>>>>>>
> >>>>>>>>>>> David
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote:
> >>>>>>>>>>>                       
> >>>>>>>>>>>> Colin,
> >>>>>>>>>>>>
> >>>>>>>>>>>> The error in the logs is below. Not sure what
> >>>>>>>>>>>>                         
> >>>> it means.
> >>>>         
> >>>>> Could
> >>>>>           
> >>>>>>> you
> >>>>>>>               
> >>>>>>>>>>>> try this
> >>>>>>>>>>>> test again from your SDSC TeraGrid account so
> >>>>>>>>>>>>                         
> >>>> we can rule
> >>>>         
> >>>>> out
> >>>>>           
> >>>>>>>>>>>> software and
> >>>>>>>>>>>> firewall issues?
> >>>>>>>>>>>>
> >>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>
> >>>>>>>>>>>> JP
> >>>>>>>>>>>>
> >>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
> >>>>>>>>>>>>   PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5
> >>>>>>>>>>>>                         
> >>>>>>> (/var/globus/prews-
> >>>>>>>               
> >>>>>>>>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log)
> >>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
> >>>>>>>>>>>>   PID: 9608 -- Notice: 6: Got connection
> >>>>>>>>>>>>                         
> >>>> 198.202.88.52 at
> >>>>         
> >>>>> Thu
> >>>>>           
> >>>>>>> Nov 30
> >>>>>>>               
> >>>>>>>>>>>> 18:49:42 2006
> >>>>>>>>>>>>
> >>>>>>>>>>>> Failed reading length 0
> >>>>>>>>>>>> GSS authentication failure
> >>>>>>>>>>>>      globus_gss_assist token :3: read
> >>>>>>>>>>>>                         
> >>>> failure: Connection
> >>>>         
> >>>>> closed
> >>>>>           
> >>>>>>>>>>>> Failure: GSS failed Major:01090000 Minor:00000000
> >>>>>>>>>>>>                         
> >>>>> Token:00000003
> >>>>>           
> >>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006
> >>>>>>>>>>>>   PID: 9608 -- Failure: GSS failed Major:01090000
> >>>>>>>>>>>>                         
> >>>>> Minor:00000000
> >>>>>           
> >>>>>>>>>>>> Token:00000003
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> On Nov 30, 2006, at 7:05 PM, Colin Enticott wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>                         
> >>>>>>>>>>>>> Thanks JP,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> But I am running into some problems.  I've
> >>>>>>>>>>>>>                           
> >>>> tried both from
> >>>>         
> >>>>> our
> >>>>>           
> >>>>>>>>>>>>> server and
> >>>>>>>>>>>>> rocks-52 and this is what I get:
> >>>>>>>>>>>>> [cme at rocks-52 ~]$ globus-job-run
> >>>>>>>>>>>>>                           
> >>>> tg-grid1.uc.teragrid.org/
> >>>>         
> >>>>>>>>>>>>> jobmanager-fork
> >>>>>>>>>>>>> /bin/uname -a
> >>>>>>>>>>>>> GRAM Job submission failed because the
> >>>>>>>>>>>>>                           
> >>>> connection to the
> >>>>         
> >>>>>>> server
> >>>>>>>               
> >>>>>>>>> failed
> >>>>>>>>>                   
> >>>>>>>>>>>>> (check host and port) (error code 12)
> >>>>>>>>>>>>> [cme at rocks-52 ~]$ grid-proxy-info
> >>>>>>>>>>>>> subject  : /C=AU/O=APACGrid/OU=Monash
> >>>>>>>>>>>>>                           
> >>>> University/CN=Colin
> >>>>         
> >>>>>>>>>>>>> Enticott/CN=1087048434
> >>>>>>>>>>>>> issuer   : /C=AU/O=APACGrid/OU=Monash
> >>>>>>>>>>>>>                           
> >>>> University/CN=Colin
> >>>>         
> >>>>>>> Enticott
> >>>>>>>               
> >>>>>>>>>>>>> identity : /C=AU/O=APACGrid/OU=Monash
> >>>>>>>>>>>>>                           
> >>>> University/CN=Colin
> >>>>         
> >>>>>>> Enticott
> >>>>>>>               
> >>>>>>>>>>>>> type     : Proxy draft (pre-RFC) compliant
> >>>>>>>>>>>>>                           
> >>>> impersonation
> >>>>         
> >>>>> proxy
> >>>>>           
> >>>>>>>>>>>>> strength : 512 bits
> >>>>>>>>>>>>> path     : /home/cme/globus_proxy.APACGrid
> >>>>>>>>>>>>> timeleft : 836:30:26  (34.8 days)
> >>>>>>>>>>>>> [cme at rocks-52 ~]$ ssh tg-grid1.uc.teragrid.org
> >>>>>>>>>>>>> Warning: Permanently added
> >>>>>>>>>>>>>                           
> >>>> 'tg-grid1.uc.teragrid.org'
> >>>>         
> >>>>> (RSA) to
> >>>>>           
> >>>>>>> the
> >>>>>>>               
> >>>>>>>>>>>>> list of
> >>>>>>>>>>>>> known hosts.
> >>>>>>>>>>>>> Permission denied (external-
> >>>>>>>>>>>>>                           
> >>>>>>>>> keyx,gssapi,publickey,gssapi,hostbased).
> >>>>>>>>>                   
> >>>>>>>>>>>>> [cme at rocks-52 ~]$
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> That is the certificate that I registered
> >>>>>>>>>>>>>                           
> >>>> with.  I also
> >>>>         
> >>>>> tried
> >>>>>           
> >>>>>>> the
> >>>>>>>               
> >>>>>>>>>>>>> ssh key
> >>>>>>>>>>>>> pair I put up on the pragma wiki.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Any thoughts?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>> Colin
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> ---
> >>>>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61
> >>>>>>>>>>>>>                           
> >>>> 03 9903 2215
> >>>>         
> >>>>>>>>>>>>> Room H7.26, Level 7, Building H, Monash 
> >>>>>>>>>>>>>                           
> >> University
> >>     
> >>>>> Caulfield
> >>>>>           
> >>>>>>> 3145,
> >>>>>>>               
> >>>>>>>>>>>>> Australia
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>                           
> >>>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>>> From: JP Navarro [mailto:navarro at mcs.anl.gov]
> >>>>>>>>>>>>>> Sent: Friday, 1 December 2006 2:47 AM
> >>>>>>>>>>>>>> To: Colin Enticott
> >>>>>>>>>>>>>> Cc: zhengc at sdsc.edu; 'Terrence Martin';
> >>>>>>>>>>>>>>                             
> >>>> gin-ops at ggf.org;
> >>>>         
> >>>>>>> 'Oscar
> >>>>>>>               
> >>>>>>>>>>>>>> Koeroo';
> >>>>>>>>>>>>>> gin-auth at ggf.org
> >>>>>>>>>>>>>> Subject: Re: start Savannah run
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Colin,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> You should be set to go on the UC/ANL
> >>>>>>>>>>>>>>                             
> >>>> TeraGrid cluster.
> >>>>         
> >>>>>>>>>>>>>> GT4 Pre-WS GRAM: tg-grid1.uc.teragrid.org:2119
> >>>>>>>>>>>>>> GT4 WS GRAM:
> >>>>>>>>>>>>>>                             
> >>>> tg-grid1.uc.teragrid.org:8443 (FORK,
> >>>>         
> >>>>> PBS)
> >>>>>           
> >>>>>>>>>>>>>> GT4 GridFTP:     
> >>>>>>>>>>>>>>                             
> >> tg-gridftp.uc.teragrid.org:2811
> >>     
> >>>>>>>>>>>>>> Regards,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> JP
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> On Nov 30, 2006, at 2:43 AM, Colin 
> >>>>>>>>>>>>>>                             
> >> Enticott wrote:
> >>     
> >>>>>>>>>>>>>>> Thankyou everyone.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> I am now registered on the GIN VO (well,
> >>>>>>>>>>>>>>>                               
> >>>> I appear here:
> >>>>         
> >> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile).
> >>     
> >>>>>>>>>>>>>>> What is my next step?
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>>> Colin
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> ---
> >>>>>>>>>>>>>>> Colin Enticott, Research Scientist, Ph:
> >>>>>>>>>>>>>>>                               
> >>>> +61 03 9903 2215
> >>>>         
> >>>>>>>>>>>>>>> Room H7.26, Level 7, Building H, 
> >>>>>>>>>>>>>>>                               
> >> Monash University
> >>     
> >>>>> Caulfield
> >>>>>           
> >>>>>>>>> 3145,
> >>>>>>>>>                   
> >>>>>>>>>>>>>>> Australia
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>                               
> >>>>>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc at sdsc.edu]
> >>>>>>>>>>>>>>>> Sent: Thursday, 30 November 2006 11:59 AM
> >>>>>>>>>>>>>>>> To: 'Terrence Martin'
> >>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org;
> >>>>>>>>>>>>>>>>                                 
> >>>> 'Oscar Koeroo';
> >>>>         
> >>>>> 'Colin
> >>>>>           
> >>>>>>>>>>>>>>>> Enticott'; gin-
> >>>>>>>>>>>>>>>> auth at ggf.org
> >>>>>>>>>>>>>>>> Subject: RE: FW: start Savannah run
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Thank you, Terrence!
> >>>>>>>>>>>>>>>> We'll wait to hear from Colin when 
> >>>>>>>>>>>>>>>>                                 
> >> Colin finishes
> >>     
> >>>>>>>>>>>>>>>> registering to gin vo.
> >>>>>>>>>>>>>>>> Cindy
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>                                 
> >>>>>>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>>>>>> From: Terrence Martin
> >>>>>>>>>>>>>>>>>                                   
> >>>>> [mailto:tmartin at physics.ucsd.edu]
> >>>>>           
> >>>>>>>>>>>>>>>>> Sent: Wednesday, November 29, 2006 11:36 AM
> >>>>>>>>>>>>>>>>> To: Oscar Koeroo
> >>>>>>>>>>>>>>>>> Cc: zhengc at sdsc.edu; 'JP Navarro';
> >>>>>>>>>>>>>>>>>                                   
> >>>> gin-ops at ggf.org;
> >>>>         
> >>>>> 'Colin
> >>>>>           
> >>>>>>>>>>>>>>>>> Enticott'; gin-auth at ggf.org
> >>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Oscar Koeroo wrote:
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>> Hi Terrence and Cindy,
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> Getting new users up for registration
> >>>>>>>>>>>>>>>>>>                                     
> >>>> on the GIN VO
> >>>>         
> >>>>> is
> >>>>>           
> >>>>>>> easy.
> >>>>>>>               
> >>>>>>>>>>>>>>>>>> To be
> >>>>>>>>>>>>>>>>>> able to access the secured website and for
> >>>>>>>>>>>>>>>>>>                                     
> >>>>> authentication
> >>>>>           
> >>>>>>>>> reasons
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>>> during the registration process new
> >>>>>>>>>>>>>>>>>>                                     
> >>>> users must have
> >>>>         
> >>>>> their
> >>>>>           
> >>>>>>>>>>>>>>>>> certificate
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>> loaded and ready in their webbrowser.
> >>>>>>>>>>>>>>>>>>                                     
> >>>> The VOMS server
> >>>>         
> >>>>> is
> >>>>>           
> >>>>>>>>>>>>>>>>> loaded with
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>> all IGTF accredited CAs including the
> >>>>>>>>>>>>>>>>>>                                     
> >>>> Fermilab kCA.
> >>>>         
> >>>>>>>>>>>>>>>>>> Go to the website:
> >>>>>>>>>>>>>>>>>>                                     
> >>>> https://kuiken.nikhef.nl:8443/voms/gin.ggf.org/ and
> >>>>         
> >>>>>>>>>>>>>>>>>> apply for a "New user registration".
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> The usual VOMS configuration info is
> >>>>>>>>>>>>>>>>>>                                     
> >>>> also available.
> >>>>         
> >>>>> I
> >>>>>           
> >>>>>>>>>>>>>>>>> don't know what
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>> you'll need to populate a GUMS server.
> >>>>>>>>>>>>>>>>>>                                     
> >>>> This VOMS
> >>>>         
> >>>>> server
> >>>>>           
> >>>>>>> is as
> >>>>>>>               
> >>>>>>>>> any
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>>> other so I guess you can use your
> >>>>>>>>>>>>>>>>>>                                     
> >>>> regular setup.
> >>>>         
> >>>>>>>>>>>>>>>>>> In addition to the secured interface
> >>>>>>>>>>>>>>>>>>                                     
> >>>> I've also made
> >>>>         
> >>>>>>> available
> >>>>>>>               
> >>>>>>>>> a
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>>> non-secured way of grabbing a grid-mapfile.
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>                                     
> >>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile
> >>>>         
> >>>>>>>>>>>>>>>>>> There is also an RSS-feed pointing 
> >>>>>>>>>>>>>>>>>>                                     
> >> to the grid-
> >>     
> >>>>> mapfile
> >>>>>           
> >>>>>>> and
> >>>>>>>               
> >>>>>>>>>>>>>>>>> the secured
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>> interface at
> >>>>>>>>>>>>>>>>>>                                     
> >>>>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/feed-
> >>>>>>>>>>>>>>>>>                                   
> >>>>> gin.ggf.org.xml
> >>>>>           
> >>>>>>>>>>>>>>>>>> Unfortunately I'm not aware of a clear
> >>>>>>>>>>>>>>>>>>                                     
> >>>> guide. I do
> >>>>         
> >>>>> know a
> >>>>>           
> >>>>>>>>>>>>>>>>>> guide for
> >>>>>>>>>>>>>>>>>> creating the packed certificate files
> >>>>>>>>>>>>>>>>>>                                     
> >>>> that go into
> >>>>         
> >>>>> your
> >>>>>           
> >>>>>>>>>>>>>>>>> browser if you
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>> start from a two PEM formated files
> >>>>>>>>>>>>>>>>>>                                     
> >>>> (certificate file
> >>>>         
> >>>>> +
> >>>>>           
> >>>>>>>>>>>>>>>>>> private key
> >>>>>>>>>>>>>>>>>> file) that's at
> >>>>>>>>>>>>>>>>>>                                     
> >>>>> http://certificate.nikhef.nl/info/browser
> >>>>>           
> >>>>>>>>>>>>>>>>>> Once a user has passed that stage, the
> >>>>>>>>>>>>>>>>>>                                     
> >>>> registration
> >>>>         
> >>>>> for
> >>>>>           
> >>>>>>> the
> >>>>>>>               
> >>>>>>>>>>>>>>>>> VO is as
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>> trivial as any web-forum account 
> >>>>>>>>>>>>>>>>>>                                     
> >> registration.
> >>     
> >>>>>>>>>>>>>>>>> I am assuming this user already has a
> >>>>>>>>>>>>>>>>>                                   
> >>>> grid cert since
> >>>>         
> >>>>> they
> >>>>>           
> >>>>>>>>>>>>>>>>> list a DN so
> >>>>>>>>>>>>>>>>> only VOMS registration is required.
> >>>>>>>>>>>>>>>>>                                   
> >>>> Once that is done
> >>>>         
> >>>>>>> either I
> >>>>>>>               
> >>>>>>>>>>>>>>>>> run my
> >>>>>>>>>>>>>>>>> update of GUMS manually or in 720/2
> >>>>>>>>>>>>>>>>>                                   
> >>>> minutes on average
> >>>>         
> >>>>> the
> >>>>>           
> >>>>>>>>>>>>>>>>> user will be
> >>>>>>>>>>>>>>>>> automatically downloaded into my GUMS
> >>>>>>>>>>>>>>>>>                                   
> >>>> database. I
> >>>>         
> >>>>> actually
> >>>>>           
> >>>>>>> do
> >>>>>>>               
> >>>>>>>>>>>>>>>>> not have
> >>>>>>>>>>>>>>>>> to do anything, but I can speed things
> >>>>>>>>>>>>>>>>>                                   
> >>>> up ever so
> >>>>         
> >>>>> slightly
> >>>>>           
> >>>>>>> if
> >>>>>>>               
> >>>>>>>>> I
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>> am in
> >>>>>>>>>>>>>>>>> the office and someone asks me to try
> >>>>>>>>>>>>>>>>>                                   
> >>>> refreshing gums.
> >>>>         
> >>>>>>>>>>>>>>>>> Terrence
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>    Oscar
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
> >>>>>>>>>>>>>>>>>>                                     
> >>>>>>>>>>>>>>>>>>> Sounds right, Terrence. Let me ask
> >>>>>>>>>>>>>>>>>>>                                       
> >>>> Oscar who has
> >>>>         
> >>>>> helped
> >>>>>           
> >>>>>>> me
> >>>>>>>               
> >>>>>>>>>>>>>>>>> with GIN
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>> VO before.
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>> Hi, Oscar,
> >>>>>>>>>>>>>>>>>>> Could you advise Colin what need to
> >>>>>>>>>>>>>>>>>>>                                       
> >>>> be done to be
> >>>>         
> >>>>>>>>>>>>>>>>>>> added in GIN VO?
> >>>>>>>>>>>>>>>>>>> I'm also cc'ing to gin-auth list.
> >>>>>>>>>>>>>>>>>>> If there is a guide for potential GIN
> >>>>>>>>>>>>>>>>>>>                                       
> >>>> users, please
> >>>>         
> >>>>>>>>>>>>>>>>>>> let me know the url and I can link it
> >>>>>>>>>>>>>>>>>>>                                       
> >>>> to our GINOPS
> >>>>         
> >>>>>>>>>>>>>>>>>>> page.
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>> Cindy
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>                                       
> >>>>>>>>>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>>>>>>>>> From: Terrence Martin
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>>> [mailto:tmartin at physics.ucsd.edu]
> >>>>>           
> >>>>>>>>> Sent:
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 3:24 PM
> >>>>>>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
> >>>>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org;
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>> 'Colin Enticott'
> >>>>         
> >>>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> The quickest and easiest way for me
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>> is to have him
> >>>>         
> >>>>>>> added to
> >>>>>>>               
> >>>>>>>>>>>>>>>>>>>> a VO.
> >>>>>>>>>>>>>>>>>>>> How easy is it to add him to the GIN
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>> VO? One in
> >>>>         
> >>>>> there I
> >>>>>           
> >>>>>>>>>>>>>>>>> can hit my
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>> gums reload and he will be able to
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>> access UCSD as a
> >>>>         
> >>>>> GIN
> >>>>>           
> >>>>>>>>>>>>>>>>>>>> user. Any
> >>>>>>>>>>>>>>>>>>>> other approach requires me hacking
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>> his DN into my
> >>>>         
> >>>>> local
> >>>>>           
> >>>>>>>>>>>>>>>>> VO which I
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>> prefer to avoid and does not help
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>> him with any
> >>>>         
> >>>>> other
> >>>>>           
> >>>>>>> site.
> >>>>>>>               
> >>>>>>>>>>>>>>>>>>>> Terrence
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>>>>>>>>>>>>>>>>>>> Thanks, Terrence, for the quick reply!
> >>>>>>>>>>>>>>>>>>>>> Colin has not been a GIN user.
> >>>>>>>>>>>>>>>>>>>>> What do you think it's the best way
> >>>>>>>>>>>>>>>>>>>>>                                           
> >>>> to get colin
> >>>>         
> >>>>>>> access?
> >>>>>>>               
> >>>>>>>>>>>>>>>>>>>>> Cindy
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>                                           
> >>>>>>>>>>>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>>>>>>>>>>> From: Terrence Martin
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>>>>> [mailto:tmartin at physics.ucsd.edu]
> >>>>>>>               
> >>>>>>>>> Sent:
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 2:53 PM
> >>>>>>>>>>>>>>>>>>>>>> To: zhengc at sdsc.edu
> >>>>>>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops at ggf.org
> >>>>>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>> We only have a production cluster,
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> but I should
> >>>>         
> >>>>> still
> >>>>>           
> >>>>>>>>>>>>>>>>> be
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>> able to help.
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>>>>>>>>>>>>>>>>>>>> I do not seem to have Colin in my
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> GUMS database
> >>>>         
> >>>>>>> though
> >>>>>>>               
> >>>>>>>>>>>>>>>>> for
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>> GIN or any
> >>>>>>>>>>>>>>>>>>>>                                         
> >>>>>>>>>>>>>>>>>>>>>> other VO. Should he be downloaded
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> with GIN's
> >>>>         
> >>>>> users?
> >>>>>           
> >>>>>>>>>>>>>>>>>>>>>> Terrence
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote:
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>>>>>>>>>>>>>>>>>>>>> Hi, JP and Terrence,
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Could you help Colin to get 
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >> ready to run
> >>     
> >>>>> Savannah
> >>>>>           
> >>>>>>>>>>>>>>>>>>>>>>> application on your GIN 
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >> testbed clusters?
> >>     
> >>>>>>>>>>>>>>>>>>>>>>> You can find Colin's user info at
> >>>>>>>>>>>>>>>>>>>>>>> http://wiki.pragma-
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>>>>> grid.net/index.php?title=ColinDetails
> >>>>>>>               
> >>>>>>>>>>>>>>>>>>>>>>> If you need more info or action
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> from Colin, or
> >>>>         
> >>>>> have
> >>>>>           
> >>>>>>>>>>>>>>>>> any questions
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>>>>> for Colin or me, please let us know.
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Thank you very much!
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Cindy
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>>>>>>>>>>>> From: Cindy Zheng
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> [mailto:zhengc at sdsc.edu] Sent:
> >>>>         
> >>>>>>>>> Tuesday,
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>>>>>>>> November 28, 2006 2:31 PM
> >>>>>>>>>>>>>>>>>>>>>>> To: 'gin-ops at ggf.org'
> >>>>>>>>>>>>>>>>>>>>>>> Subject: start Savannah run
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Dear all,
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Thanks for all the people
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> involved to help make
> >>>>         
> >>>>>>>>>>>>>>>>>>>>>>> TDDFT application run and GIN
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> testbed monitoring
> >>>>         
> >>>>>>>>>>>>>>>>>>>>>>> very fruitful experiments! We
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> have learned a lot
> >>>>         
> >>>>> and
> >>>>>           
> >>>>>>>>> have
> >>>>>>>>>                   
> >>>>>>>>>>>>>>>>>>>>>>> presented our learnings at 
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >> OGF and SC06.
> >>     
> >>>>>>>>>>>>>>>>>>>>>>> Let's continue our collaborative
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> effort with our
> >>>>         
> >>>>>>> plan
> >>>>>>>               
> >>>>>>>>>>>>>>>>> - start our
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>>>>> next experiment with Savannah
> >>>>>>>>>>>>>>>>>>>>>>> fire simulation - a
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> data-intensive application,
> >>>>         
> >>>>> to
> >>>>>           
> >>>>>>>>>>>>>>>>> explore data
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>>>>> related interoperation issues.
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Colin Enticott at Monash
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> University of Australia
> >>>>         
> >>>>>>>>>>>>>>>>>>>>>>> is the lead driver. Colin has
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> documented the
> >>>>         
> >>>>>>>>>>>>>>>>>>>>>>> introduction and requirements of this
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>>> application at
> >>>>>           
> >>>>>>>>>>>>>>>>>>>>>>> http://wiki.pragma-
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>>> grid.net/index.php?title=Savannah
> >>>>>           
> >>>>>>>>>>>>>>>>>>>>>>> or go to
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>                                               
> >>>> http://forge.gridforum.org/sf/wiki/do/viewPage/
> >>>>         
> >>>>>>>>>>>>>>>>>>>>>> projects.gin/wi
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>>>>>>>>>>>>>>>>>>> ki/GinOps
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>                                           
> >>>>>>>>>>>>>>>>>>>>>> click "Savannah" under "Applications",
> >>>>>>>>>>>>>>>>>>>>>> where "first Savannah experiment"
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> is refering to
> >>>>         
> >>>>>>>>>>>>>>>>>>>>>> a previous experiment in PRAGMA
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> testbed. The
> >>>>         
> >>>>>>>>>>>>>>>>>>>>>> "second Savannah experiment" is
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> the one for GIN
> >>>>         
> >>>>>>> testbed.
> >>>>>>>               
> >>>>>>>>>>>>>>>>>>>>>> We like to run this application on
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> all Grids in
> >>>>         
> >>>>> GIN
> >>>>>           
> >>>>>>>>>>>>>>>>> testbed, but
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>>>> in 2 steps. First, we will run it on
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>>>>>>>>>>>>>>> PRAGMA/TeraGrid/OSG - since
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>>>> these should be relatively easier
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> to do. We like
> >>>>         
> >>>>> to
> >>>>>           
> >>>>>>> get
> >>>>>>>               
> >>>>>>>>>>>>>>>>> this done
> >>>>>>>>>>>>>>>>>                                   
> >>>>>>>>>>>>>>>>>>>>>> before the year end.
> >>>>>>>>>>>>>>>>>>>>>> The next step, Colin will work
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> with EGEE and
> >>>>         
> >>>>>>> Nordugrid
> >>>>>>>               
> >>>>>>>>>>>>>>>>>>>>>> to develop possible solutions, 
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >> to enable
> >>     
> >>>>>>> interoperation
> >>>>>>>               
> >>>>>>>>>>>>>>>>>>>>>> and to include all 5 Grids in the run.
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>> Thanks in advance for your
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>> continued help with
> >>>>         
> >>>>> this!
> >>>>>           
> >>>>>>>>>>>>>>>>>>>>>> Cindy
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>                                             
> >>>>>>>>>>>> --
> >>>>>>>>>>>>   gin-auth mailing list
> >>>>>>>>>>>>   gin-auth at ogf.org
> >>>>>>>>>>>>   http://www.ogf.org/mailman/listinfo/gin-auth
> >>>>>>>>>>>>                         
> >>>>>>>>>> --
> >>>>>>>>>>   gin-ops mailing list
> >>>>>>>>>>   gin-ops at ogf.org
> >>>>>>>>>>   http://www.ogf.org/mailman/listinfo/gin-ops
> >>>>>>>>>>                     
> >>>> --
> >>>>   gin-ops mailing list
> >>>>   gin-ops at ogf.org
> >>>>   http://www.ogf.org/mailman/listinfo/gin-ops
> >>>>
> >>>>         
> >
> > --
> >   gin-ops mailing list
> >   gin-ops at ogf.org
> >   http://www.ogf.org/mailman/listinfo/gin-ops
> >   
> 
> 



More information about the gin-auth mailing list