[DFDL-WG] how to do mix of case sensitive and insensitive delimiters

[Tim Kimber]

The other way to do this is 
- wrap the element in a group
- set dfdl:ignoreCase to 'no' on the group. 
- set dfdl:ignoreCase to 'yes' on the element. 
- put the terminator on the group and the initiator on the element. 

Or the other way round if it works better that way.

regards,

Tim Kimber, DFDL Team,
Hursley, UK
Internet:  kimbert at uk.ibm.com
Tel. 01962-816742 
Internal tel. 37246742




From:   Mike Beckerle <mbeckerle.dfdl at gmail.com>
To:     dfdl-wg at ogf.org, 
Date:   19/06/2013 23:42
Subject:        [DFDL-WG] how to do mix of case sensitive and insensitive 
delimiters
Sent by:        dfdl-wg-bounces at ogf.org




I have a wierd case where the initiator wants to be case insensitive 
matching, but the terminator wants to be case sensitive.

The only way I can think of dealing with this is to use the initiator, but 
handle the length via lengthKind='pattern' to grab the value, doing 
lookahead so it will stop before the terminator.
Then an empty sequence with a case sensitive terminator to pick off that 
part of the data stream. 

-- 
Mike Beckerle | OGF DFDL Workgroup Co-Chair | Tresys Technology | 
www.tresys.com
--
  dfdl-wg mailing list
  dfdl-wg at ogf.org
  https://www.ogf.org/mailman/listinfo/dfdl-wg

Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number 
741598. 
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.ogf.org/pipermail/dfdl-wg/attachments/20130620/cbd1f56f/attachment.html>