[DFDL-WG] Specify field based on the beggining of the binary file
Tim Kimber
KIMBERT at uk.ibm.com
Tue Sep 18 04:20:26 EDT 2012
Hi Miguel,
I work with Steve, and we were discussing this a moment ago.
Would it be acceptable to get this structure in the info set:
Document ( complex element )
|---Header ( complex element )
|---|----Field4 ( simple element )
|---Body
|---|---Field1 ( simple element )
|---|---Field2 ( simple element )
|---|---Field3 ( simple element )
If you really need to get the entire Header field as a BLOB *and* get
Field4 as a separate field then you could achieve that using
inputValueCalc. The value of Field4 would be calculated from the BLOB or
string value of Header using XPath string operations.
regards,
Tim Kimber, DFDL Team,
Hursley, UK
Internet: kimbert at uk.ibm.com
Tel. 01962-816742
Internal tel. 37246742
From: Steve Hanson/UK/IBM at IBMGB
To: Miguel Vieira <carlos.vieira at gmv.com>,
Cc: "dfdl-wg at ogf.org" <dfdl-wg at ogf.org>
Date: 17/09/2012 18:29
Subject: Re: [DFDL-WG] Specify field based on the beggining of the
binary file
Sent by: dfdl-wg-bounces at ogf.org
It sounds like you need two DFDL schemas and two parse operations.
The first schema models the whole message. It takes the whole data stream
as input and creates an infoset for Header, Field1, Field2, Field3.
The second schema models just Field 4 using leadingSkip and trailingSkip
to position correctly. It takes the Header from the first infoset as
input, and creates an infoset for Field4.
<xs:element name="Field4" type="xs:hexBinary"
dfdl:lengthKind="explicit" dfdl:length="3" dfdl:lengthUnits="bytes"
dfdl:leadingSkip="316"
dfdl:trailingSkip="193" dfdl:alignmentUnits="bytes" />
Regards
Steve Hanson
Architect, Data Format Description Language (DFDL)
Co-Chair, OGF DFDL Working Group
IBM SWG, Hursley, UK
smh at uk.ibm.com
tel:+44-1962-815848
From: Miguel Vieira <carlos.vieira at gmv.com>
To: Steve Hanson/UK/IBM at IBMGB
Cc: "dfdl-wg at ogf.org" <dfdl-wg at ogf.org>
Date: 17/09/2012 18:04
Subject: RE: [DFDL-WG] Specify field based on the beggining of the
binary file
Hi Steve!
I need them both.
From: Steve Hanson [mailto:smh at uk.ibm.com]
Sent: segunda-feira, 17 de Setembro de 2012 18:00
To: Miguel Vieira
Cc: dfdl-wg at ogf.org
Subject: RE: [DFDL-WG] Specify field based on the beggining of the binary
file
Is Field4 the only part of the Header that is of interest?
Do you want the full Header (as a 512 byte BLOB) and Field4 in the
infoset?
Regards
Steve Hanson
Architect, Data Format Description Language (DFDL)
Co-Chair, OGF DFDL Working Group
IBM SWG, Hursley, UK
smh at uk.ibm.com
tel:+44-1962-815848
From: Miguel Vieira <carlos.vieira at gmv.com>
To: Steve Hanson/UK/IBM at IBMGB
Cc: "dfdl-wg at ogf.org" <dfdl-wg at ogf.org>
Date: 17/09/2012 16:06
Subject: RE: [DFDL-WG] Specify field based on the beggining of the
binary file
First of all: Thanks! J
My binary data specification is:
Header: 512Bytes;
Field1: 21504 bytes (21KB);
Field2: 5Bytes;
Field3: 1Byte;
Field4: 3 Bytes ßStating at byte 316 counting from the beginning of the
file.
This means that Field4 is placed inside the Header field.
“leadingSkipBytes” or “alignment” would do, but can you specify the place
you start counting?
Thanks.
Miguel
From: Steve Hanson [mailto:smh at uk.ibm.com]
Sent: segunda-feira, 17 de Setembro de 2012 15:41
To: Miguel Vieira
Cc: dfdl-wg at ogf.org
Subject: Re: [DFDL-WG] Specify field based on the beggining of the binary
file
Miguel, please can you send us a graphic of the data in question, I want
to make sure I have understood your data correctly.
Regards
Steve Hanson
Architect, Data Format Description Language (DFDL)
Co-Chair, OGF DFDL Working Group
IBM SWG, Hursley, UK
smh at uk.ibm.com
tel:+44-1962-815848
From: Miguel Vieira <carlos.vieira at gmv.com>
To: "dfdl-wg at ogf.org" <dfdl-wg at ogf.org>
Date: 17/09/2012 15:03
Subject: [DFDL-WG] Specify field based on the beggining of the
binary file
Sent by: dfdl-wg-bounces at ogf.org
Hi!
I have a binary file specification that specifies some fields referenced
by the beginning of the binary info.
For instance imagine that there is a field with 1024Bytes and the next one
starts at byte 512 counting from the beginning of the info.
Is it possible to do that using dfdl?
I’ve seen dfdl:floating, but I can’t find much info on that.
Thanks.
P Please consider the environment before printing this e-mail.
This message including any attachments may contain confidential
information, according to our Information Security Management System, and
intended solely for a specific individual to whom they are addressed. Any
unauthorised copy, disclosure or distribution of this message is strictly
forbidden. If you have received this transmission in error, please notify
the sender immediately and delete it.
Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede
contener información clasificada por su emisor como confidencial en el
marco de su Sistema de Gestión de Seguridad de la Información siendo para
uso exclusivo del destinatario, quedando prohibida su divulgación copia o
distribución a terceros sin la autorización expresa del remitente. Si Vd.
ha recibido este mensaje erróneamente, se ruega lo notifique al remitente
y proceda a su borrado. Gracias por su colaboración.
Esta mensagem, incluindo qualquer ficheiro anexo, pode conter informação
confidencial, de acordo com nosso Sistema de Gestão de Segurança da
Informação, sendo para uso exclusivo do destinatário e estando proibida a
sua divulgação, cópia ou distribuição a terceiros sem autorização expressa
do remetente da mesma. Se recebeu esta mensagem por engano, por favor
avise de imediato o remetente e apague-a. Obrigado pela sua colaboração.
--
dfdl-wg mailing list
dfdl-wg at ogf.org
https://www.ogf.org/mailman/listinfo/dfdl-wg
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
P Please consider the environment before printing this e-mail.
This message including any attachments may contain confidential
information, according to our Information Security Management System, and
intended solely for a specific individual to whom they are addressed. Any
unauthorised copy, disclosure or distribution of this message is strictly
forbidden. If you have received this transmission in error, please notify
the sender immediately and delete it.
Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede
contener informacin clasificada por su emisor como confidencial en el
marco de su Sistema de Gestin de Seguridad de la Informacin siendo para
uso exclusivo del destinatario, quedando prohibida su divulgacin copia o
distribucin a terceros sin la autorizacin expresa del remitente. Si Vd. ha
recibido este mensaje errneamente, se ruega lo notifique al remitente y
proceda a su borrado. Gracias por su colaboracin.
Esta mensagem, incluindo qualquer ficheiro anexo, pode conter informao
confidencial, de acordo com nosso Sistema de Gesto de Segurana da
Informao, sendo para uso exclusivo do destinatrio e estando proibida a sua
divulgao, cpia ou distribuio a terceiros sem autorizao expressa do
remetente da mesma. Se recebeu esta mensagem por engano, por favor avise
de imediato o remetente e apague-a. Obrigado pela sua colaborao.
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
P Please consider the environment before printing this e-mail.
This message including any attachments may contain confidential
information, according to our Information Security Management System, and
intended solely for a specific individual to whom they are addressed. Any
unauthorised copy, disclosure or distribution of this message is strictly
forbidden. If you have received this transmission in error, please notify
the sender immediately and delete it. Este mensaje, y en su caso,
cualquier fichero anexo al mismo, puede contener informacin clasificada
por su emisor como confidencial en el marco de su Sistema de Gestin de
Seguridad de la Informacin siendo para uso exclusivo del destinatario,
quedando prohibida su divulgacin copia o distribucin a terceros sin la
autorizacin expresa del remitente. Si Vd. ha recibido este mensaje
errneamente, se ruega lo notifique al remitente y proceda a su borrado.
Gracias por su colaboracin. Esta mensagem, incluindo qualquer ficheiro
anexo, pode conter informao confidencial, de acordo com nosso Sistema de
Gesto de Segurana da Informao, sendo para uso exclusivo do destinatrio e
estando proibida a sua divulgao, cpia ou distribuio a terceiros sem
autorizao expressa do remetente da mesma. Se recebeu esta mensagem por
engano, por favor avise de imediato o remetente e apague-a. Obrigado pela
sua colaborao.
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
--
dfdl-wg mailing list
dfdl-wg at ogf.org
https://www.ogf.org/mailman/listinfo/dfdl-wg
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.ogf.org/pipermail/dfdl-wg/attachments/20120918/eeb601df/attachment-0001.html>
More information about the dfdl-wg
mailing list