Shielding Ad Fwd: TS-Lindgren News: Fast Track Project Awarded to ETS-Lindgren

[Karl]

I don't know why I received this, but I like reading about shielding.

I visited a test facility once and learned they had needed to increase
the shielding in a room ETS-Lindgren had provided, by soldering copper
foil over the air vent.

---------- Forwarded message ----------
From: Martha  Hallman <martha.hallman at ets-lindgren.com>
Date: Fri, 08 Jan 2021 10:41:02 -0500
Subject: ETS-Lindgren News: Fast Track Project Awarded to ETS-Lindgren
To: gmkarl at gmail.com

Fast Track Project Awarded to ETS-Lindgren

Completion Schedule Key to Award for Six FACT™ 3 EMC Test Chambers

CEDAR PARK, Texas – January 8, 2021 – ETS-Lindgren announced receipt of a
significant contract award of six (6) FACT 3-2.0 Dual-Range EMC Test
Chambers to be installed at a commercial EMC test lab in the bustling
Silicon Valley area of Northern California.  ETS-Lindgren received the
award due to a number of reasons, the most important being our ability to
meet the expedited required delivery.  ETS-Lindgren committed to the
chamber performance specified in ANSI C63.4a (2014) along with a total
delivery time for the first two chambers of less than three months from
order placement.  Another plus: ETS-Lindgren offered one point of contact
for the entire project, as the FACT 3 EMC Test Chambers are designed,
engineered, manufactured, installed, integrated, and serviced by in-house
professional teams.

“We understand the challenges the pandemic presents to delivery schedules
these days, especially if products need to be shipped overseas,” said Bill
Giacone, ETS-Lindgren’s Senior Vice President, Global Sales and Marketing.
“Since we manufacture the vast majority of the project components at our
facilities in the United States, we were confident that we could commit to
the schedule.  It was a very aggressive schedule to be sure, but our team
was dedicated from day one to meet — and even exceed — our customer’s
expectations.”  ETS-Lindgren’s vertical integration capabilities nearly
eliminate reliance on third parties; this competency reduced the risk of
missing the customer’s urgent delivery schedule, since ETS-Lindgren had
greater control of the majority of the project components.

ETS-Lindgren’s [1]FACT 3 EMC Test Chambers provide compliant radiated
emissions and immunity test capabilities for most international EMC
regulations.  These chambers achieve broadband performance using a unique
arrangement of hybrid polystyrene and ferrite tile absorber materials,
offering an anechoic environment that supports testing up to 40 GHz.  The
chambers are constructed of ETS-Lindgren's [2]Series 81 Shielding, a
time-proven design with over 25,000 installations worldwide.  The Series 81
shielded enclosure consists of shielded modular panel sections assembled
with a clamping system into a self-supported structure.  While the external
overall structure dimensions of standard FACT 3 EMC Test Chambers are
approximately 20’H x 30’L x 22’W (6m x 9m x 7m), custom sizes are
available.  With ETS-Lindgren’s sophisticated chamber performance modeling
capabilities, chamber options may be evaluated in advance to achieve the
optimal performance objective, taking into account space and/or budget
constraints.

ETS-Lindgren FACT 3 EMC Test Chambers are frequently lined with
[3]DuraSorb™ hybrid broadband absorber materials, Model DSH-600H.  DuraSorb
is manufactured in-house at ETS-Lindgren under a strict ISO 9001 Quality
Management System.  It is constructed using substrates with rigid, closed
foam cells loaded volumetrically and uniformly throughout each piece of
absorber.  DuraSorb meets the requirements specified in Space, Automotive,
Commercial, Industrial, and Military Standards such as ECSS, MIL-STD-461F,
MIL-STD-464C, RTCA-DO-160G, CISPR 16, ANSI C63.4, and IEC 61000-4-3.  Each
piece of absorber is factory-tested before shipping, and full performance
data is provided.

Upon completion of each shielded enclosure and prior to absorber
installation, ETS-Lindgren performs an RF shield verification test in
accordance with the test methods of MIL-STD-285/ IEEE-299 at 1 GHz plane
wave field.  Following installation of the anechoic absorber material,
ETS-Lindgren performs Normalized Site Attenuation (NSA) testing for test
ranges per ANSI C63.4 from 30 MHz to 1 GHz.  Site Voltage Standing Wave
Ratio (SVSWR) testing is also typically performed as specified in CISPR
16-1-4 from 1 to 18 GHz at one (1) 3-meter distance.

ETS-Lindgren provided a turnkey project, which was critical to ensure
meeting our customer’s aggressive delivery schedule.  Did you know
[4]ETS-Lindgren is the only true turnkey EMC systems supplier,
manufacturing 90% of the components of an EMC test facility?  These
components include RF shielded enclosures, doors, penetrations,
electromagnetic absorbers, power line filters, CCTV monitoring systems,
turntables, antenna towers, emission measurement and field generation
immunity antennas, field probes, power amplifiers, instrumentation, and
measurement software.  Following project completion, our customer is
assured of continued support by ETS-Lindgren’s six manufacturing factories
and team of over 700 employees worldwide.

About ETS-Lindgren

ETS-Lindgren is an international manufacturer of systems and components
that measure, shield, and control electromagnetic and acoustic energy.  The
company's products are used for electromagnetic compatibility (EMC),
microwave and wireless testing, electromagnetic field (EMF) measurement,
radio frequency (RF) personal safety monitoring, magnetic resonance imaging
(MRI), and control of acoustic environments.

Headquartered in Cedar Park, Texas, ETS-Lindgren has manufacturing
facilities in North America, Europe, and Asia.  The company is a wholly
owned subsidiary of ESCO Technologies, a leading supplier of engineered
products for growing industrial and commercial markets. ESCO is a New York
Stock Exchange listed company (symbol ESE) with headquarters in St. Louis,
Missouri.  Additional information about ETS-Lindgren is available at
[5]www.ets-lindgren.com.  Additional information about ESCO and its
subsidiaries is available at [6]www.escotechnologies.com.

CONTACT:
Janet O'Neil
Marketing Communications
ETS-Lindgren
Office:  +1 (512) 531-2676

Cell: +1 (425) 443-8106
janet.oneil at ets-lindgren.com

Join us Online!

[7]            [8]               [9]
[61b4a79c63aa2e4130f295a94b06bbdc.jpeg]               [10]

CONFIDENTIALITY AND PRIVACY NOTICE: You are receiving this email because
you requested product or service information from ETS-Lindgren, or you have
opted in to receiving ongoing updates emails from ETS-Lindgren on their
product and service offerings. View our [11]Privacy Policy and Privacy
Notices outlining the guidelines used for protecting your personal
information. The information in this communication may be confidential and
is intended only for the use of the recipient(s) named above. You are
hereby notified that any dissemination, distribution, or copying of this
communication, or any of its contents, to any other party, is strictly
prohibited. If you have received this communication in error, please return
it to the sender immediately and delete the original message and any copy
of it from your computer system. If you have any questions concerning this
message, please contact the sender.

References

1. http://www.ets-lindgren.com/products/chambers/emc-chambers/fact™-chambers/5004/500401
2. http://www.ets-lindgren.com/datasheet/shielding/rf-shielded-enclosures/11003/1100302
3. http://www.ets-lindgren.com/products/absorber/emc-absorbers/polystyrene-hybrid-absorber/1005/100501
4. http://www.ets-lindgren.com/sites/etsauthor/General_Brochures/Test_and_Measurement_Full_Line.pdf
5. http://www.ets-lindgren.com/
6. http://www.escotechnologies.com/
7. https://www.facebook.com/ETSLindgren
8. https://twitter.com/ETSLindgren
9. https://www.linkedin.com/company/ets-lindgren
10. https://www.youtube.com/user/etslindgrenvideo
11. http://www.ets-lindgren.com/Privacy-Policy
This message was sent by: martha.hallman at ets-lindgren.com,
ETS-Lindgren, 1301 Arrow Point Drive, Cedar Park, 78613
Unsubscribe:
https://app.icontact.com/icp/mmail-mprofile.php?r=48720767&l=12193&s=21EF&m=468912&c=1376739