On Wed, Dec 26, 2018 at 05:12:18AM -0500, grarpamp wrote:
[Now using proper Subject tech...]
If you have a line, you can still dial each other and negotiate up to 33.8kbps v.34bis, add better software compression (zstd) instead of depending on v.44, and add encryption algos on each end. v.92 56k needed an ISP end to work.
Companies like US Robotics and Zoom might still make v.34bis hardware modems... see USR5637. Lots of modems on used market.
Full hardware modem with PCM DSP is needed to do elite first pass random phone scanning that analyzes the analog instead of depending on successful second stage "V." negotiation. Plus you get as bonus all the WAV recordings of: "Hello... Helloooooo?! WTF!!!" ;-)
Anyone still have that analysis software?
https://en.wikipedia.org/wiki/List_of_ITU-T_V-series_recommendations
You could probably do just as well creating your own modems with today's DIY hardware platforms in your local Makerspace. Opensource it on Github.
I found my high school's SCO Unix system using Toneloc back in the day (and a ton of other shit too...) I'd leave that thing running on my 286 all day long, like 8am - 4pm, for weeks at a time. I understand that WarVOX is at least one of the more modern incarnations of Toneloc, uses VoIP to make a bunch of calls at the same time, other neat tricks. I haven't actually used it as I did with toneloc, when I was a kid :)
On 12/23/18, jim bell <jdb10987@yahoo.com> wrote:
You forgot that in 1992, typical dialup modems worked at 9600 bps. Now, most people have access to 25 megabits/sec Internet. I occasionally see people in discussion areas claim that "the U.S. Government" was responsible for making "The Internet".I shut that talk down, by pointing out "Do you think that The Internet would have 'worked' if a person, at home, had to connect up to his ISP at with a 300 bps modem? 1200 bps? 2400 bps?"I counter by pointing out that the people REALLY responsible for a usable Internet were those who developed the 9600 bps, 14,400 bps, and 28,800 bps modems. Rockwell, USR (US Robotics), Hayes, Telebit, and a few others. Had that not existed, it would have been hard to make the Internet available to most people. From: https://en.wikipedia.org/wiki/Modem "V.32 modems operating at 9600 bit/s were expensive and were only starting to enter the market in the early 1990s when V.32bis was standardized. Rockwell International's chip division developed a new driver chip set incorporating the standard and aggressively priced it. Supra, Inc. arranged a short-term exclusivity arrangement with Rockwell, and developed the SupraFAXModem 14400based on it. Introduced in January 1992 at $399 (or less), it was half the price of the slower V.32 modems already on the market. This led to a price war, and by the end of the year V.32 was dead, never having been really established, and V.32bis modems were widely available for $250.V.32bis was so successful that the older high-speed standards had little to recommend them. USR fought back with a 16,800 bit/s version of HST, while AT&T introduced a one-off 19,200 bit/s method they referred to as V.32ter, but neither non-standard modem sold well."
And: https://en.wikipedia.org/wiki/Modem
V.34/28.8 kbit/s and 33.6 kbit/s
×
×
"Any interest in these proprietary improvements was destroyed during the lengthy introduction of the 28,800 bit/s V.34 standard. While waiting, several companies decided to release hardware and introduced modems they referred to as V.FAST. In order to guarantee compatibility with V.34 modems once the standard was ratified (1994), the manufacturers were forced to use more flexible parts, generally a DSP and microcontroller, as opposed to purpose-designed ASIC modem chips. "The ITU standard V.34 represents the culmination of the joint efforts. It employs the most powerful coding techniques including channel encoding and shape encoding. From the mere four bits per symbol (9.6 kbit/s), the new standards used the functional equivalent of 6 to 10 bits per symbol, plus increasing baud rates from 2,400 to 3,429, to create 14.4, 28.8, and 33.6 kbit/s modems. This rate is near the theoretical Shannon limit. When calculated, the Shannon capacity of a narrowband line is {\displaystyle {\text{bandwidth}}\times \log _{2}(1+P_{u}/P_{n})}, with {\displaystyle P_{u}/P_{n}} the (linear) signal-to-noise ratio. Narrowband phone lines have a bandwidth of 3,000 Hz so using {\displaystyle P_{u}/P_{n}=1000} (SNR = 30 dB), the capacity is approximately 30 kbit/s.[7]
-- GPG fingerprint: 17FD 615A D20D AFE8 B3E4 C9D2 E324 20BE D47A 78C7