https://github.com/google-coral/libedgetpu # Edge TPU runtime library (libedgetpu) This repo contains the source code for the userspace level runtime driver for [Coral devices](https://coral.ai/products). This software is distributed in the binary form at [coral.ai/software](https://coral.ai/software/). ## License [Apache License 2.0](LICENSE) ## Warning If you're using the Coral USB Accelerator, it may heat up during operation, depending on the computation workloads and operating frequency. Touching the metal part of the USB Accelerator after it has been operating for an extended period of time may lead to discomfort and/or skin burns. As such, if you enable the Edge TPU runtime using the maximum operating frequency, the USB Accelerator should be operated at an ambient temperature of 25°C or less. Alternatively, if you enable the Edge TPU runtime using the reduced operating frequency, then the device is intended to safely operate at an ambient temperature of 35°C or less. Google does not accept any responsibility for any loss or damage if the device is operated outside of the recommended ambient temperature range. Note: This issue affects only USB-based Coral devices, and is irrelevant for PCIe devices.