Breadboard purchasing tips from https://forum.arduino.cc/t/good-quality-breadboards/539538/9

This is also of interest to me because I almost completed a 12dof quadruped robot for my niece and nephew during my chemotherapy, but then got confused and stopped associated with breaking the prototype controller, which I had foolishly soldered onto a wire wrap board, not knowing how to use one.

> I've seen 3M and Global Specialties recommended.

> recommend the K&H AD-series breadboards, they have 6 tiepoints per strip

> breadboards made by Osepp are pretty reliable.

> have found that the breadboards with the model number, “ZY-201”, available on ebay, work well

> would recommend BusBoard. They have good breadboards and they last long.

wirewrap:

> Green PCB is from Velleman,

> https://www.vellemanusa.com/products/view/?country=us&lang=enu&id=350322 15

> ECS 1/2 it's called, very good quality, holes very even spaced and pads are also very good.

> Wirewrap sockets and wirewrap socket strips, 30 AWG wire, and wrapping tool can be found here.

> https://www.peconnectors.com/wire-wrap-sockets-and-headers/ 22

> I use the Gold colored tool on page 2. Stripper built into the handle.