On Sun, May 11, 1997 at 12:51:38AM +0100, Adam Back wrote:
Kent Crispin <kent@songbird.com> writes:
On Sat, May 10, 1997 at 07:19:40PM +0100, Adam Back wrote:
It seems to me that it is you Kent who is scrambling to find plausible reasons why key escrow is the best or only technology to use in corporate email systems.
Not "best". "Easiest". Look at it this way, Adam -- if it was easy to implement Carl's model, it would already have happened, given the dislike of key-escrow in the cryptographic community.
Firstly: have you done a comprehensive survey of corporate access systems available to commerce.
No. I personally have not. People I know have, though -- the survey was completed about -- um -- a year and a half ago, I guess. So it is somewhat out of date.
Secondly: there are a number of other forces "encouraging" the GAK model. Government incentives: Europe companies and research groups get given research funding to experiment with GAK/TTP architectures. Either the architecture is stipulated as part of the call for proposals, or proposals involving GAK are going to get funding more easily.
That's a good point.
Third: people involved with key recovery at all have tended to be defense contractor types, who are more likely to go with government "standards" (such as TTPs/clipper/tessera/etc).
I'm not so sure about this.
But, when examined in detail, in light of real requirements from organizations, it is not easy at all.
I was under the impression that PGP Inc had done it, or is working on it.
This is one reason I'm not so sure -- PGP Inc is not a defense contractor.
It's not very hard at all, all you need is PGP's existing multiple crypto-recipient feature.
If you believe all your employees will correctly use the proper PGP incantation each and every time, even when they are tired and haven't had coffee for 4 hours, and their kid is sick, and their wife is mad about something, then yes, it is simple. But of course, that is not realistic. Employees are forgetful, the organizations goals are not their goals, and the PGP UI is -- well, I find it a little awkward, at times. So PGP's multiple recipient feature is a fundamental building block, but you need something more in a crypto-client to be sure that company policy is followed. It's that "somthing more" that is the hard part. And lest we get into the macho programmer argument -- of course it's just a mere matter of design and programming.
The storage of your company master key needs some thought, but that's a common problem with either your crypto key safe model or multiple recipient model. [...] I'm not sure that multiple recipient is that much less useful to GAK than the safe model, buf if it is at all less useful, and the systems otherwise basically equivalent I would argue against the safe model for that reason alone. However I consider the safe model inferior in several areas neglecting this issue anyway. [...] I contend that there are similar and mostly comparable problems with the safe model. Lets take a look at a few:
With this background, perhaps now you can see why I say that Carl's solution doesn't even address the problem. The problem is management of complexity. Carl says "encrypt to Acme Corp". Who in Acme Corp?
Kent says give all the keys to Acme corp, or let Acme corp generate the keys. Who is Acme Corp?
The company that bought the crypto software for the protection of company secrets. I think I said "who *in* Acme Corp", though, as a prelude to the following points, because with the multiple recipient model there is a policy decision as to which key in Acme is the master.
The next bit is as a result of multiple recipient being more flexible than the safe model as stated. We now have freedom to allow different elements in the company to audit and access different departments communications. Naturally this extra flexibility results in policy decisions.
Yes. To make use of this flexibility you now need a piece of software that allows you to produce policy decisions, sign them, and make them visible to all the crypto clients. Another mere matter of design and programming. And this bit of sortware needs to operate securely -- you can't just any joe blow subverting it.
What part of the organization that is Acme Corp is authorized to know this particular bit of information? Because some of the employees are idiots you want this built automatically into the application they are using for encryption/email/whatever. How does this software know what policy is appropriate for which employee? How is that policy distributed? What is the interface that allows a policy to be defined? How do you protect the policy definition from subversion?
If making policy decisions is too complex in your view for implementation or practicality, well just substitute a policy dumbed down to the level of the safe model. Ie there is one crypto recipient, all company communications _must_ be encrytped to it as a second crypto recipient.
You are right -- there is the degenerate case where the master key is fixed. However, I would contend that is *very* bad crypto design. So thus you have the problem of distributing information about a revoked master key. (Your solution, below, was that you have a signed policy statement. If you have a security breach, and are revoking a master key, how do you know what signature to trust?) Furthermore, by encrypting every document to the same master key you have actually vastly increased your exposure -- a key-safe can have a lot of special-purpose physical and cryptographic security, but the master key in the multiple recipient model is almost certainly treated the same as all other keys. For example, in the key-safe model I can just hand someone the master key on a floppy, and it doesn't do them any good, because they can't get to the key-safe -- it is physically secure. Next I walk into the physically secure facility (I, as keeper of the keys, have legitimate access), and change the master key. No security problem, no documents have been compromised, regardless of their physical location or access. With the multiple recipient model if I hand out the master key, every visible encrypted document is immediately and irrevocably compromised. So the key-safe model allows you a far greater security for your data than the multiple recipient model.
Policy distribution is something Netscape has been doing; apparently the difference between it's browsers is largely a signed policy file with a mildly obfuscated public verification key check in the code.
Completely different environment, of course -- I saw some traffic where they admitted that probably without too much effort the policy could be subverted. But I don't deny that it would be possible to build a policy distribution scheme -- but it is a non-trivial problem.
I'm sure you can arrange this same flexibility and bring in the baggage of the policy decisions that come with it for the safe model also if you want it. Store keys for different departments in different safes. Give the master keys for the department to the department head, etc.,etc. Same problem, similar policy decisions, right?
Nope. Not at all. The policy for multiple recipients needs to be interpreted by the crypto clients. But in the key-safe model policy is almost entirely in human hands. It doesn't even have to be written down. Modestly secure example: The keysafe runs on a single workstation, hardened similar to a firewall. The only network connections are to a single port, which does the cryptographically secure key storing protocol. When a key needs to be recovered, three trusted employees troop into the room (three passwords are required, these passwords are essentially the master key), and retrieve the needed key on a floppy. Other than the authentication protocol, there is *no* policy embedded in the key-safe, which is to say, *any* policy the company wants to use is ok. It may take the personal presence of the company president, it may take a signed statement from operations staff, whatever. No policy is embedded in software, and no software to support software needs to be written.
The key-safe model has no significant policy issues that need to be embedded in software -- the only policy is "when data encryption keys are generated a copy is sent to the key-safe (using an encrypted channel, of course)."
As stated above, this is because you have chosen a single master key to go with the safe model. If you choose a single crypto-recipient, and master key encrypting the private half of that key, you largely have equivalence.
Not so, as I hopefully explained above, the key-safe can have enhance security, so that the danger of a compromise is lessened.
I don't see the difference. With the encrypt to multiple recipients approach where the second crypto-recipient is the company key you can store the private half of the corporate key using the same techniques you discussed above.
Access to the data requires access to the master key in both cases.
It follows, therefore, that if the master key is compromised in both systems, all data is compromised. From that perspective, the systems are equally secure.
Or similarly insecure. They are quite similar, I think multiple recipient offers more flexibility, and security advantages, as well as avoiding the sharing of private keys.
I spoke too soon here. The key-safe model is intrinsically more secure.
You fix the second crypto-recipient in the MUA if you wish to.
This is precisely the point I was alluding to in the policy discussion above. In an organizational content, *of course* you will put all the complexity in the MUA. The question is, how do you change the "master key" indicator that is in each MUA? Suppose that the organization wants different keys for different departments -- how do you keep track of which master key goes where? How do all those MUA's get their key policy module updated?
Sign the policy file. Certify the signing key(s). You're going to have this anway for authentication of email content.
You may not be able to trust the signature. [...]
You can use binding cryptography to ensure the fire-wall can tell that it is an encrypted copy of the same document without the firewall needing access to the master key. You can't do this company has all keys in the safe model, without givin the firewall automatic access to the safe, which is a huge security risk.
??? With the key-safe model the firewall never enters into the picture.
It does for the same functionality. With the key-safe model how do you know that the ciphertexts flowing out of the building are encrypted with a key that is in your safe at all?
Oh -- I'm sorry. I didn't think through what you were saying. You were attempting to guard against an insider threat. A waste of time, probably. He could frisbee a floppy out the window to his honey in the red sports car.
You don't have to do the binding cryptography stuff with multiple recipients if you don't want to. With the safe model you can't do it even if you do want to.
How does the firewall know what is encrypted? Just a bunch of gifs of the family? Just the first 5000 lines of "Paradise Lost", slightly altered? Anyway, if the employee uses the "approved" MUA, and it isn't compromised, then it can store a copy of all outgoing mail, encrypted with the employee's key. If he doesn't use the approved MUA, or the MUA is compromised, then of course the firewall protections are useless. So, in the keysafe model, the firewall never enters the picture -- it is all handled in the MUA, anyway.
The advantage of the multiple recipient model is that doesn't commit the cardinal sin/design flaw of sharing private crypto keys.
Two things: First, any crypto system that doesn't deal with protection/recovery/secure-use of private keys is incomplete.
For storage encryption keys where backups are not plaintext, I agree. For communication keys, you do not need to backup. Doing so weakens security. Communications keys should be transient, forward secret even. Authentication keys should be persistent, back up not required, just generate new key, and new certificates if lost. Storage keys should be backed up where necessary.
I agree with all this. Only storage keys need to be in the keysafe. [...] -- Kent Crispin "No reason to get excited", kent@songbird.com the thief he kindly spoke... PGP fingerprint: B1 8B 72 ED 55 21 5E 44 61 F4 58 0F 72 10 65 55 http://songbird.com/kent/pgp_key.html