Doug.Brightwell@corp.sun.com (Doug Brightwell) writes:
Doug> But as a non-technical person, what I'm struggling to Doug> understand is how a surveillance team could monitor the Doug> emmisions from such cables and have any clue as to what Doug> they are. Let's say they zeroed in on my poorly shielded Doug> modem cable and were able to tune into a stream of 0's Doug> and 1's. How could they then resolve that digital data Doug> into anything meaningful? ... My understanding, being only a moderate RF weenie, is that UARTs, the devices which, more often than not, are driving your serial ports, generate an emission very much like good old frequency shift keying. It makes sense - having listened to computers on radios before. Think in terms of sound first, as it's easier. A given sound represents a "1", and another tone is "0". You waver back and forth between the tones to describe the data you're transmitting. The idea is that some of the normal emission characteristics from components in computers (like UARTs) correspond to this sort of modulation. With regard to machine types, if it's a serial line, it's fairly easy to map the communications into a set of probably protocol suites. If you know *anything* about the use of the machine, it becomes a lot easier. For instance, given an intercept of TCP/IP traffic over a SLIP line, I could probably reconstruct a TELNET session log, but it's nowhere as easy as just reading a terminal session on a link to some BBS. Doug> Even if it's just a plain text file how could the Doug> surveillance team read it? Does each member of the ASCII Doug> character set have specific and identifiable radiation Doug> signatures? For example, does the letter "k" as it Doug> passes through my modem cable have a characteristic EMR Doug> that is the same for all machines? You might also think in terms of things other than screens and modem cables. For instance, many keyboards emit RF as they are used. It's not irrational to suspect that these emissions might be tied in some way to the use of the keyboard - I have an old FCC Class A Wyse terminal that sounds different depending on which keys I hit. Since we know that every piece of equipment has a uniquely identifiable (even compared to other units of the same type) emission signature, it's not too outlandish to expect that different key encodings in a keyboard might generate different emission patterns. Doug> Sorry if this query is too basic, but I would appreciate Doug> any enlightenment... It's weird stuff, and some people would rather not have the world learning how to do this. In fact, Van Eck's original article is known to have some deliberate misinformation in it, as the author didn't want to make it "too easy" to learn how to do this kind of ELINT. --Strat