When asked about the current Anthrax scare, President Bush replied, "I don't know what the big deal is all about. I think it's perfectly safe to travel by train." Note from Matthew Gaylor: I've heard that Israeli gas masks are now going for upwards of $150 with extra filters going for $30. Although they can be had cheaply enough on E-Bay. That's a far cry from the case (12) I purchased years ago for something on the order of $5 per mask which included West German filters. For those of you who aren't well prepared or aren't well heeled let me suggest The Junk Science, Do-It-Yourself -- Gas Mask below: Source: Sierra Times http://www.sierratimes.com/ The Junk Science, Do-It-Yourself -- Gas Mask http://www.sierratimes.com/archive/files/oct/03/arwh100301.htm NOTE: Click on the above URL to view the many pictures in the article. Wayne Hicks 10.03.01 (Note to my readers: I'll be following this with a Chem-Bio Protection system for small children, and a Do-it-yourself chem-bio shelter... only here at Sierra Times!--WH) Wayne has compiled a new e-book: Junk Science Survival that contains many instructions and much more information on how to apply some of these ideas to your own practical use! Click below for more information. http://www.sierratimes.com/junksciad.htm With the current state of affairs, and the repeated warnings by high-level Government Officials of possible, and even probable, Bio-Chemical Attacks on America, it seems to be time to apply the 'Real American Junk Science" philosophy to personal protection, and, based on the constant references in the news media to the demand for gas masks that can no longer be purchased, that item won first place in the list. Photo http://www.sierratimes.com/images/mask/model1.jpg The strange looking girl in the photo above is my Daughter, DaniJo, and she is wearing a dual-filtered homemade gas mask that will, hopefully, afford her some protection in the event our small town becomes the target of a bio-chem attack. The two-stage filter is made of plastic bottles containing various filter materials, connected together by medical-grade clear neoprene tubing, and mated to a standard oxygen nose-mouth face mask. The eyepiece started out as an off-the-shelf eye-protector, and the housing is nothing more than a section of automotive inner-tube into which all of the relevant pieces have been secured with staples and rubber cement. Air is drawn into the filter bottles through a length of 3/8 inch copper tubing which extends through the bottle's cap and all the way to the bottom. The end is crimped so that air comes out of it in small streams. The bottle contains rubbing alcohol, and air drawn through it rises through the alcohol in tiny bubbles, hopefully killing any germs along the way. Also attached to the cap of the bottle, right beside the copper tubing, is one end of a length of our medical-grade tubing, and the air, which has bubbled up above the level of the alcohol, is now drawn through it to the second stage filter. In this smaller filter bottle, the incoming tube also rests on the bottom, but it is covered with a large wadding of HEPA filter material removed from a HEPA vacuum cleaner bag. It is then covered with four ounces of powdered activated charcoal, which is in turn sealed into place with a stuffing of more HEPA material. The piece of tubing seen protruding from the side of the mouthpiece and wrapping around the mask is connected to the air exhaust valve, a small automotive one-way valve (called a PCV valve) that allows the air you exhale to vent from the filter system without building up positive pressure in the bottle. When you inhale, the small amount of vacuum you apply to the filters and lines causes the valve to close, preventing any outside air from returning to the mask. Since the exhaust-valve tubing is six inches long, any air in the tubing that might get sucked in before the ball can close is only air that you have already filtered and breathed out, and therefore presents no danger. A second PCV valve is placed in the line from the filters to the mask, but reversed, so that it opens when you breathe in and closes when you breathe out. Activated Charcoal absorbs many times its own weight in contaminants that pass through it, and while air flows freely through the charcoal powder and the HEPA material; particles as small as 0.3 microns do not. Powdered Activated Charcoal is well known as the world's most effective absorbent. Activated Charcoal is like a magnetic sponge, that will adsorb any living or nonliving substance that has the opposite electrical charge. It is made by cremating hardwood logs or coconut shells. The resulting Charcoal is then steamed, producing microscopic tunnels. Lastly, it is processed to produce sizes from blocks down to powder. Different sizes of the resulting Activated Charcoal are used for different purposes. When any gases or liquids pass by &/or through the Activated Charcoal, the substances as mentioned before will be attracted to it's surface. Activated Charcoal can adsorb over 4,000 chemicals including drugs, poisons, toxins, and heavy metals, plus pathogens! It is used in Air and Water filters all around the world. HEPA filtration technology was developed by the U.S. Atomic Energy Commission to remove airborne radioactive particles. In order to be considered true HEPA filter it must be capable of removing 99.97% of particles as small as 0.3 microns. Today HEPA filter is used in such places as hospitals and manufactures' clean rooms where clean air is absolutely vital. ALL known bacteria will die when trapped in the HEPA filters, for after passing through the alcohol and Activated Charcoal elements, there is no moisture available to facilitate their growth, and they lose their own internal moisture rapidly. This mask, as ridiculous as it looks, should be functional in protecting you against most bio-chemical attacks we may face, and here's why: BIO ATTACKS: Because biological toxins are not volatile, as are chemical agents, and with rare exceptions, do not directly affect the skin, an aggressor would have to present toxins to target populations in the form of respirable aerosols, which allow contact with the more vulnerable inner surfaces of the lung. This, fortunately, makes even our homemade gas mask potentially effective against such a threat, since it will absorb/trap particles as small as 0.3 microns. Almost all biological attack threats are made up of aerosol particles between 0.5 and 5 microns in diameter. CHEMICAL ATTACKS: During an attack with Chemical agents, the respiratory system must be protected against aerosols and gases in the air (at the same time, it's a good idea to protect the rest of the body against direct contact with chemical agents in the form of liquid or solid particles). In addition, the respiratory system must be protected against evaporating gas. The filter in a protective mask consists of two parts; an aerosol filter and a gas filter. The aerosol filter is built up of a layer of fibers (HEPA). The particles are removed when they collide with the fibers, to which they adhere. If it is a volatile substance that adheres, it may subsequently evaporate from the aerosol filter. Consequently, it is important to design a filter whereby the gas filter component is located after the aerosol filter. The gas filter component of the protective filter consists of Activated Charcoal, which absorbs over 400 varieties of chemical gases, including almost all known chem-warfare agents, and especially those which are most feasible to produce for use in large scale attacks. What all this tech-speak means is that this inexpensive alternative mask has a reasonable chance of keeping you alive for a period of time while you make your way to a shelter to await the "all-clear" and when I say "inexpensive", I mean it the whole thing was built for less than $30.00 in off-the-shelf parts and gathered junk, and only took about four hours of work! The parts list runs as follows: 1 15 inch automotive inner-tube, scrounged free from a local tire store 1 pair of eye-protectors, $1.88 at Wal-Mart 1 Oxygen mask w/tubing, $3.00 from a local Medical Supplies store 1 tube "Shoe Goo" rubber cement, $2.97, Wal-Mart 1 4 oz. Bottle of Activated Charcoal powder, $11.00, local drug store 2 small PCV valves, $2.49 each, Wal-Mart 1 package Hoover True HEPA vacuum cleaner Bags, $3.97, Wal-Mart 1 14-inch length 3/8 inch copper tubing, from an old air conditioner 1 bottle rubbing alcohol, $.88, Wal-Mart 1 2-liter pop bottle, from my trash can 1 20 oz Gatorade bottle, ditto Take a look: Parts photo http://www.sierratimes.com/images/mask/parts.jpg All I did was cut out a fourteen-inch section of the inner-tube, and make cutouts for the eye-protectors and the nose/mouth mask, then push them through the holes and staple them in place. The seams I coated with a liberal application of Shoe Goo, to ensure that they won't leak or come apart if you've ever used that stuff, you'll know what I mean! And, by the way eye protectors have many little air holes around their housings be sure to plug them all with a layer of Shoe Goo! Next, I removed the HEPA material from the vacuum cleaner bags in preparation for assembling and attaching the filters. This is easy Just cut the top off the bag, and gently pull the HEPA liner out of the bag. Be careful not to poke holes in it. Assembling the filter bottles is the most difficult part, and even that isn't hard. Drill two 3/8 inch holes in the cap, like so: Make sure the copper tubing is clean, and push it through one of the holes in the cap so that it extends all the way to the bottom. It's best if you can bend the end so that the opening cannot push against he bottom of the bottle, then use pliers to crimp the end slightly this will cause the air that comes through it to break up into small bubbles in the alcohol. Next, cut the oxy-bottle-connector from the clear neoprene hose that came with your oxygen mask, and push the new end through the other hole in the cap, but only a short distance, say about an inch or two. This end must always remain above the level of the alcohol in the bottle, and the bottle must always remain upright. Seal the tubes into the cap with lots of Shoe Goo! The smaller bottle is for the dry part of the filter. Again, drill two holes in the cap for this bottle, and then cut the neoprene line about twenty inches from where it enters the cap of the larger bottle, and push this end through one of the holes you just drilled. It should extend all the way to the bottom of the smaller bottle with a couple of inches to spare, so that you can lay it on the bottom of the bottle with cap still off. Now, take about a ten-inch square of the HEPA material and fold it into fourths, then wrap this around the end of the tube you just put in the cap. Secure it with a big glob of Shoe Goo and let it dry thoroughly. Once it's dry, let it hang to the bottom of the bottle and pour in the Activated Charcoal. Now take the rest of your HEPA material and pack it into the bottle. It doesn't matter if it gets pretty crumpled you want as much surface area exposed to the air coming through it as you can get! Once it's packed in, put the cap on and put a bead of Shoe Goo around the seam of the cap. Take the end of the neoprene hose that is now left hanging from your mask, cut off a six-inch length and lay it aside, then push the remaining end through the last hole in the cap, only about an inch, and secure both hoses in place in their holes with more Goo! Now, all that's left is to add the check valves, and hook it all up! This is a little tricky, so I'll go into heavy detail: On each side of your oxygen mask, there are some holes arranged in about a quarter-inch circle drill or punch through one or two of them on one side, until you have a 3/8 inch hole, then use Shoe Goo to close up all of the others, on both sides. Take the six-inch length of tubing you laid aside a few moments ago, and push it into the hole in the mask, then secure it with Shoe Goo, and use more Goo to glue it alongside the mask so that it curves upward around towards the ear. Now, grab on of the PCV valves and look at the arrow on the side of it to see which way it allows air to flow. You want to attach it to the hose so that it allows air to come I from the hose, but not go back in in other words, the arrow should point AWAY from the hose! Seal the connection with Shoe Goo! The final step is to connect the main filter line to the mask, and make sure that any holes in the connector (some have them) are sealed with Goo, and then cut the line about four inches below the mask, and get your other PCV valve. This time, you want the arrow to point TOWARDS THE MASK this will allow air to come in from the filters, but will not let your exhales go back into the filter bottles. Instead, this will force your exhaled breath to exit the mask through the exhaust valve that we put alongside the mask itself. Put the valve in place, then seal both ends of it to the hoses with Goo to make sure you don't have a leak. Putting the mask on is a little tricky, and you need to practice until you can get it on and tightly in place in about four or five seconds. Just pull the mask over your head, like a ski mask, but pull gently on the front of it and firmly on the back until it sits snugly in place and lines up on your eyes and mouth. Adjust it for as much comfort as you can manage remember, it's part of an inner tube and may be a little tight. This can be relieved partly by cutting away part of the back of the mask, making a hole that the back of your head can protrude into. If it's still too tight, I'd suggest getting a bigger inner tube and start again I would never cut the back open and try to make straps work on it. Well, that's about it You now have a gas mask that costs little, and while it may not be pretty, it will give you a lot better chance of staying alive than you'll have without one. I'm making these for my whole family, and am working on a more portable design. If you have any questions, feel free to email me directly at redneck@sierratimes.com. ************************************************************************** Subscribe to Freematt's Alerts: Pro-Individual Rights Issues Send a blank message to: freematt@coil.com with the words subscribe FA on the subject line. List is private and moderated (7-30 messages per week) Matthew Gaylor, (614) 313-5722 ICQ: 106212065 Archived at http://groups.yahoo.com/group/fa/ **************************************************************************