@Alex
Building servald now is just like building any other OpenWrt package. I
used the OpenWrt documentations and the Makefile which can be found in
serval-dna's github repo.
Some guidance:
Here is the Makefile:
https://github.com/servalproject/serval-dna/tree/master/openwrt
The documentations I used to create the build environment:
http://wiki.openwrt.org/about/toolchain
If you follow the documentation you will build the entire OpenWrt firmware.
When you are almost done, add servald's Makefile to where all the other
Makefiles are, and run menuconfig. Menuconfig's index will be updated and
servald would be added as an option. Just check it, and make again, then
servald will be built.
Notes:
- It should be possible to build the package without building OpenWrt
using their SDK. I tried it and failed, but you may have more luck. Here it
is: http://wiki.openwrt.org/doc/howto/obtain.firmware.sdk
- Building OpenWrt takes a long time. Be prepared.
I'm attaching a binary version of servald which should be compatible with
Attitude Adjustment and the version of Serval for android Jeremy posted
here before. You can give it a shot and see if it runs before trying to
build it yourself.
On Wed, Nov 21, 2012 at 6:41 PM, Bryce Lynch
On Wed, Nov 21, 2012 at 10:36 AM, Alex P-B
wrote: Solar powered openwrt nodes should do fine though.
Can you wait until we get v0.3a of Byzantium Linux up? We've just finished Commotion compatibility, including OLSR support.
-- The Doctor [412/724/301/703] [ZS (MED)] https://drwho.virtadpt.net/ "I am everywhere."
-- You received this message because you are subscribed to the Google Groups "Serval Project Developers" group. To post to this group, send email to serval-project-developers@googlegroups.com. To unsubscribe from this group, send email to serval-project-developers+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/serval-project-developers?hl=en.
-- You received this message because you are subscribed to the Google Groups "Serval Project Developers" group. To post to this group, send email to serval-project-developers@googlegroups.com. To unsubscribe from this group, send email to serval-project-developers+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/serval-project-developers?hl=en. ----- End forwarded message ----- -- Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org ______________________________________________________________ ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org 8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE