Found this in sci.crypt.research. Notice the name at the top of the program committee... Cheers, Bob Hettinga ___________________________________________ First Call For Papers CARDIS 1996 SECOND SMART CARD RESEARCH AND ADVANCED APPLICATION CONFERENCE September 18-20, 1996, Amsterdam, The Netherlands AIMS AND GOALS Smart cards or IC cards offer a huge potential for information processing purposes. The portability and processing power of IC cards allow for highly secure conditional access and reliable distributed information systems. IC cards are already available that can perform highly sophisticated cryptographic computations. The applicability of IC cards is currently limited mainly by our imagination; the information processing power that can be gained by using IC cards remains as yet mostly untapped and is not well understood. Here lies a vast uncovered research area which we are only beginning to assess, and which will have great impact on the eventual success of the technology. The research challenges range from electrical engineering on the hardware side to tailor-made cryptographic applications on the software side, and their synergies. Many currently existing events are mainly devoted to commercial and application aspects of IC cards. In contrast, the CARDIS conferences aim to bring together researchers who are active in all aspects of design of IC cards and related devices and environment, such as to stimulate synergy between different research communities and to offer a platform for presenting the latest research advances. CARDIS 1994, sponsored by the International Federation for Information Processing (IFIP) and held in November 1994 in Lille, France, has successfully brought together representatives from leading IC research centers from all over the world. CARDIS 1996 will be the second occasion for the IC card community in this permanent activity. CARDIS 1996 will be organised jointly by the Centre for Mathematics and Computer Science at Amsterdam (CWI) and the Department of Computer Systems of the University of Amsterdam (UvA). SUBMISSIONS Submissions will be judged on relevance, originality, significance, correctness, and clarity. Each paper should explain its contribution in both general and technical terms, identifying what has been accomplished, saying why it is significant, and comparing it with previous work. Authors should make every effort to make the technical content of their papers understandable to a broad audience. Papers should be written in English. Authors should submit: * 16 copies * of a full paper * typeset using the Springer LNCS format (see instructions below) * not exceeding 20 pages in length * printed double-sided if possible * addressed to Pieter H. Hartel Univ. of Amsterdam Dept. of Computer Systems Kruislaan 403 1098 SJ Amsterdam The Netherlands In addition, each submission should be accompanied by information submitted via WWW, (http://www.cwi.nl/~brands/cardis/submit.html) or submitted via email to cardis@fwi.uva.nl that consists of: * a single postal address and electronic mail address for communication * complete title, author and affiliation information * the abstract of the paper * a small selection of the keywords that appear on this call for papers, which best describe the contribution of the paper Proceedings will be available at the conference. It is intended to publish the proceedings in the Springer LNCS series. Authors of accepted papers may be expected to sign a copyright release form. IMPORTANT DATES Submission deadline March 1, 1996 Acceptance notification May 15, 1996 Camera ready paper due July 1, 1996 Conference September 18--20 1996 THEMES Technology/hardware 1 IC architecture and techniques 2 Memories and processor design 3 Read/Write unit engineering 4 Specific co-processors for cryptography 5 Biometry 6 Communication technologies 7 Interfaces with the user, the service suppliers 8 Reliability and fault tolerance 9 Special devices 10 Standards Software 11 The operating system 12 Models of data management 13 Communication protocols IC Card design 14 Tools for internal or external software production 15 Validation and verification 16 Methodology for application design Electronic payment systems 17 Road pricing 18 Internet payment systems 19 Untraceability Algorithms 20 Formal specification and validation 21 Identification 22 Authentication 23 Cryptographic protocols for IC cards 24 Complexity Security 25 Models and schemes of security 26 Security interfaces 27 Hardware and software implementation 28 Security of information systems including cards 29 Formal verification of transaction sets 30 Protocol verification IC Cards, individuals and the society 31 IC cards and privacy 32 Owner access of data 33 IC cards: political and economical aspects 34 Is the IC card going to change legislation? 35 Patents, copyrights Future of ic cards 36 Innovative technologies 37 Moving towards the pocket intelligence 38 Convergence with portable PCs, lap tops etc ... 39 PCMCIA Innovative applications 40 Design methodology of applications 41 IC cards and the information system 42 Examples of new applications 43 Requirements for innovative cards Standards 44 Emerging standards 45 Compliance and approval ORGANISATION Steering committee chairman: Vincent Cordonnier (Rd2p, Lille) Local organisation: Pieter Hartel (Southampton, UK and UvA, The Netherlands) Stefan Brands (CWI, The Netherlands) Eduard de Jong (QC consultancy, The Netherlands) General Chairman: Pieter Hartel (Southampton, UK and UvA, The Netherlands) Program Chairmen: Pierre Paradinas (Rd2p, Lille) Jean-Jacques Quisquater (Louvain-la-Neuve, Belgium) Program committee Stefan Brands (CWI, Amsterdam) Andr\'e Gamache (Qu\'ebec, Canada) Louis Guillou (CCETT, France) Josep Domingo Ferrer (Tarragon, Spain) Pieter Hartel (Southampton, UK and UvA, The Netherlands) Hans-Joachim Knobloch (Karlsruhe, Germany) Pierre Paradinas (Rd2p, France) Reinhard Posch (Graz, Austria) Jean-Jacques Quisquater (Louvain-la-Neuve, Belgium) Matt Robshaw (RSA, inc, USA) Bruno Struif (GMD, Germany) Doug Tygar (Carnegie-Mellon, USA) LECTURE NOTES IN COMPUTER SCIENCE Advice to Authors for the Preparation of Camera-Ready Contributions to LNCS/LNAI Proceedings The preparation of manuscripts which are to be reproduced by photo-offset requires special care. Manuscripts which are submitted in technically unsuitable form will be returned for retyping or cancelled if the volume otherwise cannot be finished on time. In order to make the volume look as uniform as possible the following instructions should be followed closely. ************ * PRINTING AREA: Using 10-point font size for the main text the printing area should be 12.2 x 19.3 cm. Manuscripts prepared in this preferred format are reproduced in the same size in the book. With these settings, the interline distance should be arranged in such a way that some 42 to 45 lines occur on a full-text page. * TYPEFACE and SIZE: We recommend the use of Times or one of the similar typefaces widely used in phototypesetting. (In Times and similar typefaces the letters have serifs, i.e., short endstrokes at the head and the foot of letters.) Please do not use a sans-serif typeface for running text, except for computer programs. The text should always be justified to occupy the full line width, so that the right margin is not ragged. For normal text please use 10-point type size and one-line spacing. Small print (abstract and affiliation) should be set in 9-point type size. Please use italic print to emphasize words in running text; bold type in running text and underlining should be avoided. Headings should be capitalized (i.e., nouns, verbs and all other words with at least five letters should have a capital initial) and should, with the exception of the title, be aligned to the left. The font sizes are as follows: ************ Heading level Example Font size and style Title (centered) Type Theory 14 point, bold 1st-level heading 1 Introduction 12 point, bold 2nd-level heading 2.1 Simple Connections 10 point, bold 3rd-level heading Typing Rules. 10 point, bold 4th-level heading Remarks: (text follows) 10 point,italic ************ * FIGURES: If possible, originals should be pasted into the manuscript and centered between the margins; if no originals of the required size are available, figures may be reduced in scale and pasted into the text. For halftone figures (photos), please forward high-contrast glossy prints and mark the space in the text as well as the back of the photographs clearly, so that there can be no doubt about where or which way up they should be placed. The lettering of figures should be in 10-point font size. Figures should be numbered. The legends also should be centered between the margins and be written in 9-point font size as follows: (bold) Fig. 3. (text follows) * PAGE NUMBERING: Your paper should show no printed page numbers; they are decided by the volume editor and finally inserted by the printer. Please indicate the ordering of your pages by numbering the sheets (using a light blue/green pencil) at the bottom of the reverse side. There also should be no running heads. * PRINTING QUALITY: For reproduction we need sheets which are printed on one side only. Please use a high-resolution printer, preferably a laser printer with at least 300 dpi or higher resolution if possible. It is desirable that on all pages the text appears in the middle of the sheets. * REMARK 1: If your typesetting system does not offer the variety of font sizes needed for the preparation of your manuscript according to these instructions, you may choose a different (larger) font size and a correspondingly scaled printing area (12-point font size for the running text, for example, corresponds to a printing area of 15.3 x 24.2 cm and to a final reduction rate of 80%). * REMARK 2: You are encouraged to use LaTeX or TeX for the preparation of you camera-ready manuscript together with the corresponding Springer style files "llncs" (for LaTeX) or "plncs" (for TeX) to be obtained by e-mail or by ftp/gopher as follows: Mailserver: Send an e-mail message to svserv@vax.ntp.springer.de containing the line get /tex/latex/llncs.zip for the LaTeX syle files or get /tex/plain/plncs.zip for the TeX style files. Sending "help" to the server prompts advice on how to interact with the mail server. The style files have to be unzipped and uu-decoded for use. In case of problems in getting or uu-decoding the style files please contact "springer vax.ntp.springer.de". Ftp: The internet address is "trick.ntp.springer.de", the user id "ftp" or "anonymous". Please enter your e-mail address as password. The (above mentioned) files reside in "/pub/tex/latex/llncs". Gopher: Point your client to "trick.ntp.springer.de". ----------------- Robert Hettinga (rah@shipwright.com) Shipwright Development Corporation, 44 Farquhar Street, Boston, MA 02131 USA (617) 323-7923 "Reality is not optional." --Thomas Sowell
Phree Phil: Email: zldf@clark.net http://www.netresponse.com/zldf <<<<<